Toyota FJ Cruiser (GSJ 10, 15 series). Instruction — part 203
ET–42
EXTERIOR – ACCESS DOOR GLASS WEATHERSTRIP
ET
BODY
EXTERIOR
ACCESS DOOR GLASS WEATHERSTRIP
COMPONENTS
Non-reusable part
ACCESS DOOR GLASS
OUTER WEATHERSTRIP
B135102E01
EXTERIOR – ACCESS DOOR GLASS WEATHERSTRIP
ET–43
ET
REMOVAL
HINT:
The procedure described below is for the LH side. Use the
same procedure for both the RH and LH sides, unless
otherwise specified.
1.
REMOVE ACCESS DOOR GLASS OUTER
WEATHERSTRIP
(a) Apply protective tape to the rear door panel in the
area around the access door glass outer
weatherstrip.
(b) Using a moulding remover, disengage the 3 clips
and remove the access door glass outer
weatherstrip.
Protective Tape
B135103E01
Moulding Remover
B135104E01
ET–44
EXTERIOR – ACCESS DOOR GLASS WEATHERSTRIP
ET
INSTALLATION
HINT:
The procedure described below is for the LH side. Use the
same procedure for both the RH and LH sides, unless
otherwise specified.
1.
INSTALL ACCESS DOOR GLASS OUTER
WEATHERSTRIP
(a) Engage the 3 clips and install a new access door
glass outer weatherstrip.
(b) Remove the protective tape.
B135105
Protective Tape
B135103E01
EXTERIOR – ROOF DRIP SIDE FINISH MOULDING
ET–45
ET
BODY
EXTERIOR
ROOF DRIP SIDE FINISH MOULDING
COMPONENTS
NO. 1 ROOF DRIP SIDE
FINISH MOULDING
NO. 2 ROOF DRIP SIDE
FINISH MOULDING
NO. 3 ROOF DRIP SIDE
FINISH MOULDING
NO. 4 ROOF DRIP SIDE
FINISH MOULDING
ROOF DRIP SIDE FINISH
MOULDING JOINT COVER
ROOF DRIP SIDE FINISH
MOULDING JOINT COVER
ROOF DRIP SIDE FINISH
MOULDING JOINT COVER
Non-reusable part
ROOF DRIP SIDE FINISH
MOULDING CLIP
ROOF DRIP SIDE FINISH
MOULDING CLIP
B134999E01
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст