Volvo V90 Recharge Plug-in Hybrid (2021 year). Manual in english — page 9
LIGHTING
163
Changing the brightness of the lights
1. Press
Settings
in the top view in the cen-
tre display.
2. Press
My Car
Lights and Lighting
Interior Lighting
Interior Mood
Lighting
.
3. Under
Interior Mood Light Intensity
,
select from
Off
,
Low
and
High
.
Changing the colour of the light
1. Press
Settings
in the top view in the cen-
tre display.
2. Press
My Car
Lights and Lighting
Interior Lighting
Interior Mood
Lighting
.
3. Choose between
By Temperature
and
By Colour
in order to change the colour of
the light.
With the
By Temperature
option, the
light changes according to the set passen-
ger compartment temperature.
With the
By Colour
option, the
Theme
Colours
subcategory can be used to
adjust further.
Related information
•
•
Adjusting light functions via the centre
display (p. 151)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
166
Windows, glass and mirrors
The car contains several different windows,
glass panes and mirrors. Some of the win-
dows in the car are laminated.
The windscreen has laminated glass, and lami-
nated glass is available as an option for certain
other glass areas. Laminated glass is rein-
forced, which provides better protection
against break-ins and improved sound insula-
tion in the passenger compartment.
The panoramic roof
*
also has laminated glass.
The symbol is shown on the windows where the
glass is laminated.
1
Related information
•
Pinch protection for windows and sun
blinds (p. 166)
•
•
•
Rearview and door mirrors (p. 170)
•
•
•
Using windscreen wipers (p. 178)
•
Using windscreen and headlamp washers
(p. 180)
•
Activating and deactivating the heated
windscreen
•
Activating and deactivating the heated
rear window and door mirrors (p. 222)
Pinch protection for windows and
sun blinds
All power windows and sun blinds
*
have
pinch protection which is deployed if they are
blocked by any object while opening or clos-
ing.
In the event of blocking, the movement stops
and then reverses automatically to approx.
50 mm (approx. 2 inches) from the blocked
position (or to full ventilation position).
It is possible to force pinch protection when
closing has been cancelled, e.g. when ice is
formed, by continuing to press the control in
one and the same direction.
If any fault arises with the pinch protection, a
reset sequence can be tested.
WARNING
If the starter battery is disconnected, the
automatic opening and closing function
must be reset to work properly. A reset
must take place for pinch protection to
work.
Related information
•
Reset sequence for pinch protection
(p. 167)
•
Operating power windows (p. 168)
1
Does not apply to the windscreen or panoramic roof
*
which are always laminated and thus do not have this symbol.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
167
•
•
Reset sequence for pinch
protection
If a problem occurs with the electrical func-
tions for the electric windows, a reset
sequence can be tested.
WARNING
If the starter battery is disconnected, the
automatic opening and closing function
must be reset to work properly. A reset
must take place for pinch protection to
work.
In the event of problems with the panoramic
roof, contact a workshop.
2
Reset the power window
1. Start with the window in closed position.
2. Then operate the controls in the manual
position 3 times upwards to closed posi-
tion.
> The system is initialised automatically.
If problems persist, contact a workshop.
Related information
•
Pinch protection for windows and sun
blinds (p. 166)
•
Operating power windows (p. 168)
•
Power windows
Each door has a control panel for the electri-
cally-driven power windows. The driver's
door has controls for operating all windows
and also to activate the child safety locks.
Driver's door control panel.
Electric child safety locks
*
that deactivate
the controls in the rear doors to prevent
doors or windows from being opened
from the inside.
Controls for rear windows.
Controls for front windows.
2
An authorised Volvo workshop is recommended.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
168
WARNING
Children, other passengers or objects may
be trapped by the moving parts.
•
Always operate the windows with cau-
tion.
•
Do not allow children to play with the
controls.
•
Never leave children alone in the car.
•
Remember to always switch off the
power supply to the power windows
by setting the car's electrical system in
ignition position
0
, and then take the
key with you when leaving the car.
•
Never put an object or part of the body
through the windows, even if the car's
electrical system is fully disconnected.
Related information
•
Operating power windows (p. 168)
•
Pinch protection for windows and sun
blinds (p. 166)
•
Reset sequence for pinch protection
(p. 167)
Operating power windows
Using the driver's door control panel, all
power windows can be operated - using the
control panels in the other doors operates the
power window in the individual door.
The power windows are equipped with pinch
protection. If any fault arises with the pinch
protection, a reset sequence can be tested.
WARNING
Children, other passengers or objects may
be trapped by the moving parts.
•
Always operate the windows with cau-
tion.
•
Do not allow children to play with the
controls.
•
Never leave children alone in the car.
•
Remember to always switch off the
power supply to the power windows
by setting the car's electrical system in
ignition position
0
, and then take the
key with you when leaving the car.
•
Never put an object or part of the body
through the windows, even if the car's
electrical system is fully disconnected.
Operating the power windows.
Operating without auto. Move one of the
controls gently up or down. The power
windows move up or down as long as the
control is held in position.
Operating with auto. Move one of the con-
trols up or down to the end position and
release it. The window runs automatically
to its end position.
In order for the power windows to be used,
the ignition position must be
I
or
II
. The power
windows can be operated for a few minutes
after the car has been switched off and after
the ignition has been switched off - although
not after a door has been opened. It is only
possible to operate one control at a time.
It can also be operated using a remote control
key or keyless opening
*
with the door handle.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
169
WARNING
Check that children or other passengers
are not at risk of crushing when all the win-
dows are closed with a remote control key
or keyless opening
*
with a door handle.
One way to reduce the pulsating wind
noise when the rear windows are open is
to also open the front windows slightly.
The windows cannot be opened at speeds
above approx. 180 km/h (approx.
112 mph), but they can be closed.
The driver always bears responsibility for
following traffic regulations in force.
It may not be possible to operate windows
at low temperatures.
Related information
•
•
Pinch protection for windows and sun
blinds (p. 166)
•
Reset sequence for pinch protection
(p. 167)
•
•
Locking and unlocking with the remote
control key (p. 246)
Using the sun blind
*
The sun blinds are built into each rear door.
Rear door – manually operated
The figure is schematic - the version may vary.
Hook with associated catch
–
Pull up the sun blind and attach it to the
hook in the upper door frame.
The window can still be opened and closed
with the sun blind up.
Related information
•
Pinch protection for windows and sun
blinds (p. 166)
•
Reset sequence for pinch protection
(p. 167)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
170
Rearview and door mirrors
The rearview mirrors and door mirrors can be
used to give the driver better visibility to the
rear.
Interior rearview mirror
The interior rearview mirror is equipped with
HomeLink
*
, automatic dimming
*
and com-
pass
*
.
The interior rearview mirror is adjusted by
angling it manually.
Door mirrors
WARNING
Both mirrors are bent to provide optimal
vision. Objects may appear to be further
away than they actually are.
The door mirror positions are adjusted with
the joystick in the driver's door control panel.
There are also a number of automatic settings
that can be linked to the memory function but-
tons for the power seat
*
.
Related information
•
•
•
Adjusting rearview mirror dimming
(p. 170)
•
Angling adjustment of the door mirrors
(p. 171)
•
Storing position for seat, door mirrors and
head-up display
•
Activating and deactivating the heated
rear window and door mirrors (p. 222)
Adjusting rearview mirror dimming
Bright light from behind could be reflected in
the rearview mirrors and dazzle the driver.
Use dimming when disturbed by light from
behind.
Manual dimming
The interior rearview mirror can be dimmed
with a control in the mirror's lower edge.
Control for manual dimming.
1. Use dimming by moving the control in
towards the passenger compartment.
2. Return to normal mode by moving the
control towards the windscreen.
The control for manual dimming is not availa-
ble on mirrors with automatic dimming.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
171
Automatic dimming
*
If bright light comes from behind, the rearview
mirrors automatically dim when it is dark out-
side or when the light is limited, for example
when driving in tunnels. Automatic dimming is
always active while driving, apart from when
gearbox reverse position is selected.
When sensitivity is changed there is no
immediately noticeable change in dim-
ming, but the change takes place gradu-
ally.
Dimming sensitivity will affect both the interior
rearview mirror and the door mirrors.
To change dimming sensitivity:
1. Press
Settings
in the top view in the cen-
tre display.
2. Press
My Car
Mirrors and
Convenience
.
3. Under
Rearview Mirror Auto Dimming
,
select
Normal
,
Dark
or
Light
.
The interior rearview mirror contains two sen-
sors - one forward facing and one rearward
facing - that work together to identify and
eliminate dazzling light. The forward facing
sensor detects ambient light, while the rear-
ward facing sensor detects the light from vehi-
cle headlights behind.
For the door mirrors to be equipped with auto-
matic dimming, the interior rearview mirror
must also be equipped with automatic dim-
ming.
If the sensors are obscured by e.g. parking
permits, transponders, sun visors or
objects in the seats or in the cargo area in
such a way that light is prevented from
reaching the sensors, then the dimming
function of the interior rearview and door
mirrors is reduced.
Related information
•
Rearview and door mirrors (p. 170)
•
Angling adjustment of the door mirrors
(p. 171)
Angling adjustment of the door
mirrors
To ensure better visibility to the rear, the door
mirrors need to be set to the preferences of
the driver.
There are a number of automatic settings that
can also be linked to the memory function
buttons for the power seat
*
.
Using controls for door mirrors
Controls for door mirrors.
The door mirror positions are adjusted with
the joystick in the driver's door control panel.
Ignition position must be at least
I
.
1. Press the
L
button for the left-hand door
mirror or the
R
button for the right-hand
door mirror. The light in the button illumi-
nates.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
172
2. Adjust the position with the joystick in the
centre.
3. Press the
L
or
R
button again. The light
should no longer be illuminated.
Folding in rearview mirrors
electrically
*
The mirrors can be retracted for parking/driv-
ing in narrow spaces.
1. Depress the
L
and
R
buttons simultane-
ously.
2. Release them after approximately 1 sec-
ond. The mirrors automatically stop in the
fully retracted position.
Fold out the mirrors by pressing down the
L
and
R
buttons simultaneously. The mirrors
automatically stop in the extended position
with the previous setting.
Resetting to neutral
Mirrors that have been moved out of position
by an external force must be reset electrically
to their original position for electric retracting/
extending
*
to work correctly.
1. Fold in the door mirrors by pressing down
the
L
and
R
buttons simultaneously.
2. Fold them out again by pressing the
L
and
R
buttons simultaneously.
3. Repeat the above procedure as necessary.
The mirrors are returned to the original posi-
tion.
Angling during parking
3
A door mirror can be angled down for the
driver to view the side of the road when park-
ing, for example.
–
Engage reverse gear and press the
L
or
R
button.
Note that the button may need to be pressed
twice, depending on whether it was already
preselected. The button flashes when the door
mirror is angled down. When reverse gear is
disengaged, the door mirror automatically
starts to return after approx. 3 seconds and
then reaches its original position after approx.
8 seconds.
Automatic angling during parking
3
With this setting, the door mirror is automati-
cally angled down when reverse gear is
selected. The folded position is preset and
cannot be adjusted.
1. Tap on
Settings
in the centre display's
top view.
2. Press
My Car
Mirrors and
Convenience
.
3. Under
Exterior Mirror Tilt at Reverse
,
select
Off
,
Driver
,
Passenger
or
Both
to
activate/deactivate and to select which
review mirror should be angled.
You can make the door mirror return to its
original position by pressing the
L
or
R
button
twice.
Automatic retraction when locking
*
In the centre display, you can set all the rear-
view and door mirrors to retract/extend auto-
matically when the car is locked/unlocked
using the key.
1. Tap on
Settings
in the centre display's
top view.
2. Press
My Car
Mirrors and
Convenience
.
3. Select
Fold Mirror When Locked
to acti-
vate/deactivate.
If you manually fold the mirrors with the
L
and
R
buttons and then lock the car, they
will not fold out automatically when you
unlock the car, even if this setting has been
made. They must be manually folded out.
3
Only in combination with power seat with memory buttons
*
.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
173
Related information
•
Rearview and door mirrors (p. 170)
•
Adjusting rearview mirror dimming
(p. 170)
•
Storing position for seat, door mirrors and
head-up display
•
Activating and deactivating the heated
rear window and door mirrors (p. 222)
Panoramic roof
*
The panoramic roof is divided into two glass
sections. The front section can be opened
vertically at the rear edge (ventilation posi-
tion) or horizontally (open position). The rear
section is fixed roof glass.
The panoramic roof has a wind deflector and
a sun blind made of perforated fabric and
located under the glass roof to provide extra
protection from factors such as strong sun-
light.
The panoramic roof and sun blind are operated
with a control located in the roof.
In order that the panoramic roof and the sun
blind can be operated, the car's electrical sys-
tem must be in ignition position
I
or
II
.
WARNING
Children, other passengers or objects may
be trapped by the moving parts.
•
Always operate the windows with cau-
tion.
•
Do not allow children to play with the
controls.
•
Never leave children alone in the car.
•
Remember to always switch off the
power supply to the power windows
by setting the car's electrical system in
ignition position
0
, and then take the
key with you when leaving the car.
•
Never put an object or part of the body
through the windows, even if the car's
electrical system is fully disconnected.
•
Do not open the panoramic roof when
load carriers are fitted.
•
Do not place any heavy objects on the
panoramic roof.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
174
•
Remove ice and snow before opening
the panoramic roof. Take care not to
scratch surfaces or damage strips.
•
Do not operate the panoramic roof if it
has frozen closed.
Wind deflector
The panoramic roof has a wind deflector that
is raised when the panoramic roof is in the
open position.
Related information
•
•
Automatic closing of the panoramic roof's
•
Pinch protection for windows and sun
blinds (p. 166)
•
•
Locking and unlocking with the remote
control key (p. 246)
Operating the panoramic roof
*
The panoramic roof and sun blind are oper-
ated with a control in the roof panel and both
are equipped with pinch protection.
WARNING
Children, other passengers or objects may
be trapped by the moving parts.
•
Always operate the windows with cau-
tion.
•
Do not allow children to play with the
controls.
•
Never leave children alone in the car.
•
Remember to always switch off the
power supply to the power windows
by setting the car's electrical system in
ignition position
0
, and then take the
key with you when leaving the car.
•
Never put an object or part of the body
through the windows, even if the car's
electrical system is fully disconnected.
•
Do not open the panoramic roof when
load carriers are fitted.
•
Do not place any heavy objects on the
panoramic roof.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
}}
* Option/accessory.
175
•
Remove ice and snow before opening
the panoramic roof. Take care not to
scratch surfaces or damage strips.
•
Do not operate the panoramic roof if it
has frozen closed.
In order that the panoramic roof and the sun
blind can be operated, the car's electrical sys-
tem must be in ignition position
I
or
II
.
It can also be operated using a remote control
key or keyless opening
*
with the door handle.
WARNING
Check that children or other passengers
are not at risk of crushing when all the win-
dows are closed with a remote control key
or keyless opening
*
with a door handle.
Check that the panoramic roof is properly
closed when closing.
The movement of the roof is stopped if the
control is released during manual operation, or
when the glass reaches the comfort position
4
or the maximum opening or closing position.
The movement of both panoramic roof and
sun blind are also stopped if the roof control is
operated again in the opposite direction to the
current direction of movement.
The panoramic roof and the sun blind are also
equipped with pinch protection. If any fault
arises with the pinch protection, a reset
sequence can be tested.
For manual opening, the sun blind must be
fully open before the panoramic roof can
be opened. When the procedure is
reversed, the panoramic roof must be fully
closed before the sun blind can be fully
closed.
It may not be possible to operate windows
at low temperatures.
Open and close ventilation position
Ventilation position, vertically at the rear edge.
Open by pressing the control upward
once.
Close by pressing the control downward
once.
When the ventilation position is selected the
front glass cover is raised at its rear edge. If
the sun blind is fully closed when ventilation
position is selected, then it opens automati-
cally approx. 50 mm (approx. 2 inches).
The sun blind follows automatically if the pan-
oramic roof is closed from ventilation position.
4
Comfort position is a position where wind noise and resonance noise are at a comfortably low level while driving.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
176
Fully open and close the panoramic
roof using the roof control
Operation, manual mode
Operation, automatic mode
Manual operation
1. To open the sun blind - press the control
backwards to the position for manual
opening.
2. Open the panoramic roof to comfort posi-
tion - press the control backwards a sec-
ond time to the position for manual open-
ing.
3. Open the panoramic roof to maximum
position - press the control backwards a
third time to the position for manual open-
ing.
Close by repeating the preceding procedure in
reverse order - press the control forward/
downward to the manual closing position
instead.
Automatic operation
1. Open the sun blind to maximum position -
press the control backward to the position
for automatic opening and release.
2. Open the panoramic roof to comfort posi-
tion - press the control backwards a sec-
ond time to the position for automatic
opening and release.
3. Open the panoramic roof to maximum
position - press the control backwards a
third time to the position for automatic
opening and release.
Close by repeating the preceding procedure in
reverse order - press the control forward/
downward to the automatic closing position
instead.
Automatic operation - rapid opening or
closing
The panoramic roof and sun blind can be
opened or closed simultaneously:
–
To open - press the control rearward to
the automatic operation position twice
and release.
–
To close - press the control forward/
downward to the automatic operation
position twice and release.
Related information
•
•
Automatic closing of the panoramic roof's
•
Pinch protection for windows and sun
blinds (p. 166)
•
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
* Option/accessory.
177
Automatic closing of the
panoramic roof's
*
sun blind
With this function, the sun blind is closed
automatically 15 minutes after the car has
been locked if it is parked in hot weather. This
is in order to lower the passenger compart-
ment temperature and protect the car's
upholstery from sun-fading.
The function is deactivated when the car is
supplied from the factory and can be activated
or deactivated in the centre display.
1. Press
Settings
in the top view in the cen-
tre display.
2. Press
My Car
Locking
.
Select
Auto Close Sunroof Curtain
to
activate/deactivate.
The sun blind is also closed when all win-
dows are closed using the remote control
key or keyless opening
*
with a door handle.
Related information
•
•
•
Pinch protection for windows and sun
blinds (p. 166)
•
•
Locking and unlocking with the remote
control key (p. 246)
Wiper blades and washer fluid
Together with the washer fluid, the wipers
aim to improve visibility as well as headlamp
pattern.
The washer nozzles are heated
*
automatically
in cold weather to prevent the washer fluid
from freezing.
Information indicating that the washer fluid
needs topping up appears in the driver display
when there is approx. 1 litre (1 qt) of washer
fluid remaining.
Related information
•
Using the rain sensor (p. 179)
•
Using windscreen and headlamp washers
(p. 180)
•
Using automatic rear windscreen wiping
when reversing (p. 182)
•
Activating and deactivating the rain sen-
sor's memory function (p. 180)
•
Using the rear window wiper and rear
window washer (p. 181)
•
•
Set the wiper blades in service position
(p. 665)
•
Replacing windscreen wiper blades
(p. 664)
•
Replacing the wiper blade, rear window
(p. 663)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
178
Using windscreen wipers
The windscreen wipers are designed to clean
the windscreen. Different settings for the
windscreen wipers are set using the right-
hand stalk switch.
Right-hand stalk switch.
The thumbwheel is used to set rain sensor
sensitivity and wiper swipe frequency.
Single sweep
Lower the stalk switch and release to
make one sweep.
Windscreen wipers off
Move the stalk switch to position
0
to
switch off the windscreen wipers.
Intermittent wiping
Move the lever up to switch the wipers
to intermittent wiping. Set the number
of sweeps per time unit with the thumbwheel
when intermittent wiping is selected.
Continuous wiping
Raise the stalk switch for the wipers to
sweep at normal speed.
Raise the stalk switch further for the
wipers to sweep at high speed.
Before activating the wipers - ensure that
the wiper blades are not frozen in, and that
any snow or ice on the windscreen and
rear window is scraped away.
Use plenty of washer fluid when the wipers
are cleaning the windscreen. The wind-
screen must be wet when the windscreen
wipers are operating.
Related information
•
Using the rain sensor (p. 179)
•
Using windscreen and headlamp washers
(p. 180)
•
Using automatic rear windscreen wiping
when reversing (p. 182)
•
Wiper blades and washer fluid (p. 177)
•
Activating and deactivating the rain sen-
sor's memory function (p. 180)
•
Using the rear window wiper and rear
window washer (p. 181)
•
•
Set the wiper blades in service position
(p. 665)
•
Replacing windscreen wiper blades
(p. 664)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
179
Using the rain sensor
The rain sensor automatically starts the wind-
screen wipers based on how much water it
detects on the windscreen. Rain sensor sen-
sitivity can be adjusted with the thumbwheel
on the right-hand stalk switch.
Right-hand stalk switch.
Rain sensor button
Thumbwheel sensitivity/frequency
When the rain sensor is activated, the rain
sensor symbol
is shown in the driver
display.
Activating the rain sensor
When activating the rain sensor, the car must
be running or in ignition position
I
or
II
while
the windscreen wiper stalk switch is in posi-
tion
0
or in the position for a single sweep.
Activate the rain sensor by pressing the rain
sensor button
.
Move the lever down to make the wipers
move.
Turn the thumbwheel upward for higher sensi-
tivity and downward for lower sensitivity. An
extra sweep is made when the thumbwheel is
turned upward.
Deactivating the rain sensor
Deactivate the rain sensor by pressing the rain
sensor button
or moving the stalk
switch up to another wiper program.
The rain sensor is deactivated automatically in
ignition position
0
or when the engine is
switched off.
The rain sensor is deactivated automatically
when wiper blades are set in service position.
The rain sensor is reactivated when service
mode has been deactivated.
The windscreen wipers could start and be
damaged in an automatic car wash. Deac-
tivate the rain sensor while the car is run-
ning or when the car's electrical system is
in ignition position
I
or
II
. The symbol in the
driver display extinguishes.
Related information
•
Using windscreen and headlamp washers
(p. 180)
•
Using automatic rear windscreen wiping
when reversing (p. 182)
•
Wiper blades and washer fluid (p. 177)
•
Activating and deactivating the rain sen-
sor's memory function (p. 180)
•
Using the rear window wiper and rear
window washer (p. 181)
•
•
Set the wiper blades in service position
(p. 665)
•
Replacing windscreen wiper blades
(p. 664)
•
Replacing the wiper blade, rear window
(p. 663)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WINDOWS, GLASS AND MIRRORS
180
Activating and deactivating the
rain sensor's memory function
The rain sensor automatically starts the wind-
screen wipers based on how much water it
detects on the windscreen.
When the memory function is activated, the
rain sensor button does not need to be
pressed every time the vehicle is started:
1. Tap on
Settings
in the centre display's
top view.
2. Press
My Car
Wipers
.
3. Select
Rain Sensor Memory
to activate/
deactivate the memory function.
Related information
•
Using the rain sensor (p. 179)
•
Using windscreen and headlamp washers
(p. 180)
•
Using automatic rear windscreen wiping
when reversing (p. 182)
•
Wiper blades and washer fluid (p. 177)
•
Using the rear window wiper and rear
window washer (p. 181)
•
•
Set the wiper blades in service position
(p. 665)
•
Replacing windscreen wiper blades
(p. 664)
•
Replacing the wiper blade, rear window
(p. 663)
•
Using windscreen wipers (p. 178)
Using windscreen and headlamp
washers
Windscreen and headlamp washers are
designed to clean the windscreen and head-
lamps. Windscreen and headlamp washers
are started using the right-hand stalk switch.
Starting windscreen and headlamp
washers
Washing function, right-hand stalk switch.
–
Move the right-hand stalk switch toward
the steering wheel to start the windscreen
and headlamp washers.
> The windscreen wipers will make sev-
eral more sweeps once the stalk switch
has been released.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст