Volvo S60 Cross Country (2018 year). Instruction — part 4
INSTRUMENTS AND CONTROLS
* Option/accessory.
75
Symbol
Specification
See
Start/Stop
*
Start/Stop
*
Driver Alert System
*,
Lane Departure
Warning (LDW),
Lane Keeping Aid
(LKA)
Driver Alert System
*,
Lane Departure
Warning
*
Driver Alert System
*,
Lane Departure
Warning
*
Recorded speed
information
*
Engine block and
passenger compart-
ment heater
*
Symbol
Specification
See
Engine block heater
and passenger com-
partment heater
*
Service required
Activated timer
*
Activated timer
*
Low battery
Fuel filler flap, right-
hand side
Gear shift indicator
Gear positions
Measuring the oil
level
Park Assist Pilot -
PAP
*
Information symbols in the roof console
display
Symbol
Specification
See
Seatbelt reminder
Airbag, passenger seat,
activated
Airbag, passenger seat,
deactivated
Related information
•
Combined instrument panel - meaning of
indicator symbols (p. 67)
•
Combined instrument cluster - meaning of
warning symbols (p. 69)
•
INSTRUMENTS AND CONTROLS
* Option/accessory.
76
Volvo Sensus
Volvo Sensus is the heart of the personal Volvo
experience and connects you with the car and
outside world. Sensus provides information,
entertainment and assistance when it is needed.
Sensus consists of intuitive functions that both
enhance the car journey and simplifies owner-
ship of the car.
An intuitive navigation structure makes it possible
to receive relevant support, information and
entertainment when it is necessary, without dis-
tracting the driver.
Sensus covers all the car's solutions that enable
connection
* to the outside world and provides
you with intuitive control over all the car's capabil-
ities.
Volvo Sensus combines and presents many func-
tions in several of the car's systems on the centre
console's screen. With Volvo Sensus the car can
be personalised by means of an intuitive user
interface. Settings can be made in Car settings,
Audio and media, Climate control, etc.
With the centre console buttons and controls or
the steering wheel's right-hand keypad
* functions
can be activated or deactivated and many differ-
ent settings can be made.
With a press on MY CAR all settings related to
the driving and control of the car are presented,
such as City Safety, locks and alarm, automatic
fan speed, setting the clock, etc.
With a press on the respective function RADIO,
MEDIA, TEL
*,
*, NAV* and CAM
14
other
sources, systems and functions can be activated,
e.g. AM, FM, CD, DVD
*, TV*, Bluetooth
®
*, naviga-
tion
* and park assist camera*.
For more information about all functions/
systems, see the relevant section in the owner's
manual or its supplement.
Overview
Control panel in centre console. The figure is schematic
- the number of functions and layout of the buttons both
vary, depending on the equipment selected and the mar-
ket.
Navigation
* - NAV, see separate supplement
(Sensus Navigation).
Audio and media - RADIO, MEDIA, TEL
*, see
separate supplement (Sensus Infotainment).
Function settings - MY CAR, see MY CAR
(p. 109).
Internet-connected car -
*, see separate
supplement (Sensus Infotainment).
Climate control system (p. 120).
* (p. 258) – CAM*.
14
Applies to certain car models.
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
77
Key positions
The remote control key can be used to set the
vehicle's electrical system in different modes/
levels so that different functions are available;
see Key positions - functions at different levels
(p. 77).
Ignition switch with remote control key extracted/
inserted.
For cars with the keyless start and lock sys-
tem
* the remote control key does not need to
be inserted into the ignition switch but can be
stored in e.g. a pocket. For more information
on the keyless start and lock system, see
Keyless drive
Insert the remote control key
1. Hold the end of the remote control key with
the detachable key blade and insert the
remote control key in the ignition switch.
2. Then press the remote control key in the
ignition switch up to its end position.
Foreign objects in the ignition switch can
impair the function or destroy the lock.
Do not press in the remote control key incor-
rectly turned - hold the end with the detacha-
ble key blade, see Detachable key blade -
detaching/attaching (p. 161).
Remove the remote control key
Grip the remote control key and pull it out from
the ignition switch.
Key positions - functions at different
levels
To enable the use of a limited number of func-
tions with the engine switched off, the car's elec-
trical system can be set in 3 different levels -
0, I
and
II - with the remote control key. This owner's
manual describes these levels throughout using
the denomination "key positions".
The following table shows the functions available
in each key position/level.
||
INSTRUMENTS AND CONTROLS
* Option/accessory.
78
Level
Functions
0
•
Odometer, clock and temperature
gauge are illuminated.
•
Electrically operated seats can be
adjusted.
•
The audio system can be used for
a limited time - see the Sensus
Infotainment supplement.
I
•
Sunroof, power windows, 12 V
socket in the passenger compart-
ment, navigation, phone, ventilation
fan and windscreen wipers can be
used.
II
•
The headlamps come on.
•
Warning/indicator lamps illuminate
for 5 seconds.
•
Several other systems are acti-
vated. However, electric heating in
seat cushions and the rear window
can only be activated after starting
the engine.
This key position consumes a lot of
current from the starter battery and
should therefore be avoided!
Selecting key position/level
•
Key position 0 - Unlock the car - This
means that the car's electrical system is at
level 0.
To reach level I or II without starting the
engine - do not depress the brake/clutch
pedal when these key positions are due to be
selected.
•
Key position I - With the remote control key
fully inserted into the ignition switch
15
-
Briefly press START/STOP ENGINE.
•
Key position II - With the remote control
key fully inserted into the ignition switch
15
-
Give a long
16
press on START/STOP
ENGINE.
•
Back to key position 0 - To return to key
position 0 from position II and I - Briefly
press on START/STOP ENGINE.
Audio system
For information on audio system functions with
remote control key removed, see the Sensus
Infotainment supplement.
Starting and stopping the engine
For information about starting/stopping the
engine, see Starting the engine (p. 270).
Towing
For important information about the remote con-
trol key during towing, see Towing (p. 318).
Related information
•
15
Not required for cars with keyless start and lock system
*.
16
Approx. 2 seconds.
INSTRUMENTS AND CONTROLS
* Option/accessory.
79
Seats, front
The car's front seats have different setting
options for optimum seating comfort.
Raise/lower the seat, pump up/down.
Forward/backward: lift the handle to adjust
the distance to the steering wheel and ped-
als. Check that the seat is locked after
changing position.
Raise/lower
* front edge of seat cushion,
pump up/down.
Adjust backrest rake, turn the wheel.
Change the lumbar support
*, press the but-
ton.
Control panel for power seat
WARNING
Adjust the position of the driver's seat before
setting off, never while driving. Make sure that
the seat is in locked position in order to avoid
personal injury in the event of heavy braking
or an accident.
Lowering the passenger seat
backrest
*
17
The passenger seat's backrest can be folded for-
ward to make room for long loads.
Move the seat as far back/down as possible.
Adjust the backrest to an upright position.
Lift the catches on the rear of the backrest
and fold it forward.
4. Push the seat forward so that the head
restraint "locks" in under the glovebox.
Raising takes place in reverse order.
WARNING
Grasp the backrest and make sure that it is
properly locked after being folded up in order
to avoid personal injury in the event of sudden
braking or an accident.
Related information
•
Seats, front - electrically operated
•
17
Only applies to comfort seats.
INSTRUMENTS AND CONTROLS
* Option/accessory.
80
Seats, front - electrically operated*
The car's front seats have different setting
options for optimum seating comfort. The power
seat can be moved forward/backward and up/
down. The front edge of the seat cushion can be
raised/lowered. The backrest angle and lumbar
support
* can be changed.
Power seat
Front edge of seat cushion up/down
Raise/lower seat
Seat, forward/backward
Backrest rake
Lumbar support
* is adjusted inward and out-
ward
The power seats have overload protection which
is tripped if a seat is blocked by an object. If this
should happen, set the car's electrical system in
key position I or 0 and wait a short time before
adjusting the seat again.
Only one movement (forward/back/up/down/
inward/outward) can be made at a time.
Preparations
The seat can be adjusted for a certain time after
unlocking the door with the remote control key
without the key in the ignition switch. Seat adjust-
ment is normally made in key position I and can
always be made when the engine is running.
Seat with memory function
*
The memory function stores settings for the seat
and the door mirrors.
Store setting
Memory button
Memory button
Memory button
Button for storing settings
1. Adjust the seat and the door mirrors.
2. Press and hold button M while pressing but-
ton 1, 2 or 3 simultaneously. Hold the but-
tons depressed until the acoustic signal is
heard and text is shown in the combined
instrument panel.
The seat must be adjusted again before a new
memory can be set.
The setting for lumbar support is not stored.
Using a stored setting
Press one of the memory buttons 1-3 until the
seat and the door mirrors stop. If the button is
released, the movement of the seat and door mir-
rors will be interrupted.
Key memory
* in remote control key
All remote control keys can be used by different
drivers to store the settings for the driver's seat
and door mirrors
18
, see Remote control key - per-
18
Only if the car is equipped with power seat with memory and power retractable door mirrors. The setting for lumbar support is not stored.
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
81
Emergency stop
If the seat accidentally begins to move, press one
of the setting buttons for the seat or memory
buttons in order to stop the seat.
Restarting to reach the seat position stored in
the key memory is performed by pressing the
unlock button on the remote control key. The
driver's door must then be open.
WARNING
Risk of crushing! Make sure that children do
not play with the controls. Check that there
are no objects in front of, behind or under the
seat during adjustment. Make sure that none
of the passengers in the rear seat is in danger
of becoming trapped.
Heated seats
For heated seats, see Heated front seats
Related information
•
•
Seats, rear
The rear seat backrest and the outer seat head
restraints can be folded. The centre seat head
restraint can be adjusted to suit the height of the
passenger.
Head restraint, centre seat, rear
Adjust the head restraint according to passenger
height so that the whole of the back of the head
is covered if possible. Slide it up as required.
To lower the head restraint again, the button by
the left-hand shaft (see illustration) must be
pressed in while the head restraint is pressed
down carefully.
WARNING
The centre seat head restraint must be in its
lowest position when the centre seat is not
used. When the centre seat is used, the head
restraint must be correctly adjusted to the
height of the passenger so that it covers the
whole of the back of the head if possible.
Lowering the rear seat backrest
There must be no objects on the rear seat
when the backrest is to be folded down. The
seat belts must not be connected either. Oth-
erwise there is a risk of damaging the rear
seat upholstery.
||
INSTRUMENTS AND CONTROLS
* Option/accessory.
82
The backrest is in two parts. The parts can be
folded forward, together or separately.
1. Pull on the required handle. They are located
just inside the hatch opening.
2. Fold the backrest forward.
Lower the centre head restraint fully if the back-
rest's wide section shall be lowered.
When the backrests have been lowered, the
head restraints may need to be moved for-
ward slightly so as not to make contact with
the seat cushion.
WARNING
Check that the backrests and head restraints
are securely locked after raising to avoid per-
sonal injury in the event of sudden braking or
an accident.
Electrical lowering of the rear seat's
outer head restraints
*
1. The remote control key must be in key posi-
tion II.
2. Press the button to lower the rear outer head
restraints to improve rearward visibility.
WARNING
Do not lower the outer head restraints if there
are passengers in any of the outer rear seats.
Move the head restraint back manually until a
click is heard.
WARNING
The head restraint must be in locked position
after being folded up.
Related information
•
•
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
83
Steering wheel
The steering wheel can be adjusted in different
positions and has controls for horn and cruise
control, as well as menu, audio and phone con-
trol.
Adjusting
Adjusting the steering wheel.
Lever - releasing the steering wheel
Possible steering wheel positions
The steering wheel can be adjusted for both
height and depth:
1. The lever is pulled towards the driver to
release the steering wheel.
2. Adjust the steering wheel to the position that
suits you.
3. Push back the lever to fix the steering wheel
in place. If the lever is stiff, press the steering
wheel lightly at the same time as you push
the lever back.
WARNING
Adjust the steering wheel and fix it before
driving away.
With speed related power steering
* the level of
steering force can be adjusted, see Adjustable
steering force
Keypads
* and paddles*
Keypads and paddles in the steering wheel.
* (p. 190)* and Adaptive cruise
Paddle for manual gear changing in an auto-
matic gearbox, see Automatic gearbox -
Geartronic
Audio and phone control, see supplement,
Sensus Infotainment.
||
INSTRUMENTS AND CONTROLS
* Option/accessory.
84
Horn
Horn.
Press the centre of the steering wheel to signal.
Related information
•
* of the steering wheel (p. 84)
Heating* of the steering wheel
The steering wheel can be heated with electric
heating.
Function
Button position may vary depending on equipment
selected and market.
Repeatedly press the button to switch
between the following functions:
Function
Indicator
Switched off
Button lamp extinguished
Heating
Button lamp illuminated
Automatic steering wheel heating
With activated automatic start of steering wheel
heating, the heating of the steering wheel starts
when the engine is started. Automatic start takes
place when the car is cold and the ambient tem-
perature is below approx. 10 °C. Activate/deacti-
vate the function in the menu system MY CAR
(p. 109).
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
85
Light switches
The headlamp control activates and adjusts the
external lighting. It is also used to adjust display
and instrument lighting and ambience lights
(p. 95).
Overview, light switches.
Thumbwheel for adjusting display and instru-
ment lighting as well as ambience lights
*
Button for rear fog lamp
Knob for lighting while driving and parking
Thumbwheel for headlamp levelling
A car with active xenon headlamps
* has auto-
matic headlamp levelling and therefore does not
have the thumbwheel for headlamp levelling.
Knob positions
The same lamps are used for daytime running
lights and front position lamps. The bright-
ness is higher when the lamps are used as
daytime running lights.
Position
Specification
Daytime running lights
A
when the
car's electrical system is in key
position II or the engine is running.
Main beam flash can be used.
Daytime running lights, position
lamps rear and side marker lamps
when the car's electrical system is
in key position II or the engine is
running.
Position lamps/side marker lamps
when the car is parked
B
.
Main beam flash can be used.
Position
Specification
Daytime running lights, position
lamps rear and side marker lamps
in daylight when the car's electrical
system is in key position II or the
engine is running.
Dipped beam and position lamps/
side marker lamps in weak daylight
or darkness, or when the rear fog
lamp or windscreen wipers with
continuous wiping are activated.
*
function is activated.
function can be used.
Main beam can be activated when
dipped beam is switched on.
Main beam flash can be used.
Dipped beam and position lamps/
side marker lamps.
Main beam can be activated.
Main beam flash can be used.
A
Fitted in or under the front bumper.
B
Also at idle when the engine is running, provided that the knob
is moved to this position from another position.
Volvo recommends that
mode is used
when the car is driven.
||
INSTRUMENTS AND CONTROLS
86
WARNING
The car's audio system is not able to deter-
mine when daylight is too weak or sufficiently
strong, e.g. in fog and rain, in all situations.
The driver is always responsible for ensuring
that the car is driven with a beam pattern suit-
able for the traffic situation and in accordance
with applicable traffic regulations.
Display and instrument lighting
Different display and instrument lighting is
switched on depending on key position; see Key
positions - functions at different levels (p. 77).
The display lighting is automatically subdued in
darkness - the sensitivity is set with the thumb-
wheel.
The intensity of the instrument lighting is
adjusted with the thumbwheel.
Headlamp levelling
The load in the car changes the vertical align-
ment of the headlamp beam, which could dazzle
oncoming motorists. Avoid this by adjusting the
height of the beam. Lower the beam if the car is
heavily laden.
1. Leave the engine running, or have the car's
electrical system in key position I.
2. Roll the thumbwheel up/down to raise/lower
beam alignment.
Thumbwheel positions for different load cases.
Only driver
Driver and passenger in the front passenger
seat
Occupants in all seats
Occupants in all seats and maximum load in
the cargo area
The driver and maximum load in the cargo
area
Related information
•
•
Daytime running lights (p. 87)
•
Position lamps
Position lamps are switched on using the head-
lamp control's knob.
Knob for headlamp control in the position for position
lamps.
Turn the knob to the position for
(number
plate lighting is switched on at the same time).
If the car's electrical system is in key position II or
the engine is running then the daytime running
lights are switched on instead of the front posi-
tion lamps.
When it is dark outside and the boot lid is
opened the rear position lamps illuminate to alert
traffic behind. This takes place irrespective of
what position the knob is in or what key position
the car's electrical system is in.
When driving for more than 30 seconds at max.
10 km/h (approx. 6 mph), or if the speed
INSTRUMENTS AND CONTROLS
87
exceeds 10 km/h (approx. 6 mph), the daytime
running lights are switched on and
Reset light
switch position
is shown in the combined
instrument panel, which prompts you to turn to a
mode other than
.
Related information
•
Daytime running lights
With the knob for headlamp control in
position, and the car's electrical system in key
position
II or the engine running, the daytime
running lights are activated automatically in day-
light.
Daytime running lights during the day.
DRL
Knob for headlamp control in AUTO position.
With the knob for headlamp control in
position the daytime running lights (Daytime
Running Lights - DRL) are activated automati-
cally when the car is driven in daylight. A light
sensor on the top of the instrument panel
changes from daytime running lights to dipped
beam at twilight or when daylight becomes too
weak. Switching to dipped beam also takes place
when the windscreen wipers or rear fog lamp are
activated.
WARNING
This system help to save energy - it cannot
determine in all situations when daylight is too
weak or sufficiently strong, e.g. in mist and
rain.
The driver is always responsible for ensuring
that the car is driven with the correct beam
pattern for the traffic situation and in accord-
ance with applicable traffic regulations.
Related information
•
•
INSTRUMENTS AND CONTROLS
* Option/accessory.
88
Tunnel detection*
Tunnel detection changes the lighting from day-
time running lights to dipped beam when the car
is driven into a tunnel.
The tunnel detection function is available in cars
with rain sensor
*. The sensor detects the
entrance to a tunnel and resets the lighting from
daytime running lights to dipped beam. Approx.
20 seconds after the car has left the tunnel, the
lighting returns to daytime running lights. If the
car is driven into another tunnel within this time
period then dipped beam is kept switched on.
This avoids repeated changes to the car's light-
ing.
Note that the headlamp control's knob must
remain in
position for tunnel detection to
work.
Related information
•
•
Main/dipped beam
With the knob for headlamp control in position
and the car's electrical system in key posi-
tion
II or the engine running, the dipped beam is
activated automatically in poor light conditions.
Stalk switch and knob for headlamp control.
Position for main beam flash
Position for main beam
Dipped beam
With the knob in
position, dipped beam is
activated automatically at twilight or when day-
light becomes too weak. Dipped beam is also
activated automatically if the windscreen wipers
or the rear fog lamps are activated.
With the knob in position
dipped beam is
always switched on when the engine is running
or when key position II is active.
Main beam flash
Move the stalk switch gently towards the steering
wheel to the position for main beam flash. Main
beam comes on until the stalk switch is released.
Main beam
Main beam can be activated when the knob is in
position
19
or
. Activate/deactivate
main beam by moving the stalk switch towards
the steering wheel to the end position and then
releasing. Alternatively, the main beam can be
deactivated by a light press of the stalk switch
toward the steering wheel.
When main beam has been activated the
symbol illuminates in the combined instrument
panel.
Auxiliary lamps
*
If the car has auxiliary lamps, the driver can use
the MY CAR menu system to choose whether
they should be deactivated or switched on/off
simultaneously with the main beam
20
19
When dipped beam is switched on.
20
Auxiliary lamps must be connected to the electrical system by a workshop. Volvo recommends that you contact an authorised Volvo workshop.
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
89
Related information
•
•
•
•
Headlamps - adjusting headlamp pattern
(p. 92)
•
Active main beam*
Active main beam function detects the headlamp
beams from oncoming traffic or the rear lights of
vehicles in front, and switches the lighting from
main beam to dipped beam. The lighting returns
to main beam when the incoming light has stop-
ped.
Active main beam - AHB
Active main beam (Active High Beam - AHB) is a
function which uses a camera sensor at the top
edge of the windscreen to detect the headlamp
beams from oncoming traffic or the rear lights of
vehicles in front, and then switches from main
beam to dipped beam. The function can also take
streetlights into account.
Main beam is reactivated when the camera sen-
sor no longer sees any oncoming vehicles or
vehicles ahead.
Car with halogen headlamps
The lighting returns to main beam about a sec-
ond after the camera sensor no longer detects
the headlamp beams from oncoming traffic or the
rear lights from vehicles in front.
Car with active Xenon headlamps
If the active main beam has the on/off functional-
ity
21
then the lighting returns to main beam about
a second after the camera sensor no longer
detects the headlamp beams from oncoming
traffic or the rear lights from vehicles in front.
If the active main beam has adaptive functional-
ity
21
then, unlike what happens during conven-
tional dimming, the light beam continues to illu-
minate with main beam on both sides of oncom-
ing traffic or vehicles ahead - only the part of the
light beam that points directly to the vehicle is
dimmed.
Adaptive functionality: Dipped beam directly toward
oncoming vehicles, but continued main beam on both
sides of the vehicle.
The lighting returns to full main beam about a
second after the camera sensor no longer
detects the headlamp beams from oncoming
traffic or the rear lights from vehicles in front.
21
Depending on the car's equipment level.
||
INSTRUMENTS AND CONTROLS
90
Activating/deactivating
AHB can be activated when the headlamp con-
trol's knob is in position
(provided that the
function has not been deactivated in the menu
system MY CAR, see MY CAR (p. 109)).
Stalk switch and knob for headlamp control in AUTO
position.
The function can start while driving in the dark
when the car's speed is approx. 20 km/h
(12 mph) or higher.
Activate/deactivate AHB by moving the left-hand
stalk switch towards the steering wheel to the
end position and then releasing. Deactivation
when main beam is on means that the lights are
reset directly to dipped beam.
Car with analogue combined instrument
panel
When AHB is activated the
symbol illumi-
nates in the instrument's information display.
When main beam is switched on the
sym-
bol also illuminates in the combined instrument
panel. This also applies for active Xenon head-
lamps if the main beam is partially dimmed, i.e. as
soon as the light beam shines with slightly more
than dipped beam.
Car with digital combined instrument panel
When AHB is activated the
symbol turns
white in the instrument's information display.
When main beam is activated, the symbol turns
blue. This also applies for active Xenon head-
lamps if the main beam is partially dimmed, i.e. as
soon as the light beam shines with slightly more
than dipped beam.
Manual operation
Keep the windscreen surface in front of the
camera sensor free from ice, snow, mist and
dirt.
Do not stick or attach anything to the wind-
screen in front of the camera sensor as this
may reduce effectiveness or cause one or
more of the systems dependent on the cam-
era to stop working.
If the message
Active main beam Temporary
unavailable Switch manually
is shown in the
combined instrument panel's information display
then you have to switch manually between main
and dipped beam. However, the knob for head-
lamp control can still remain in position
.
The same applies if the message
Windscreen
sensors blocked See manual
and the
symbol are shown. The
symbol goes out
when these messages are shown.
AHB may be temporarily unavailable e.g. in situa-
tions with dense fog or heavy rain. When AHB
becomes available again, or the windscreen sen-
sors are no longer blocked, the message extin-
guishes and the
symbol illuminates.
WARNING
AHB is an aid for using the optimum beam
pattern when conditions are favourable.
The driver always bears responsibility for man-
ually switching between main and dipped
beam when traffic situations or weather con-
ditions so require.
Examples of when manual switching between
main and dipped beam may be required:
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст