Volvo V90 Twin Engine (2020 year). Manual in english — page 4
DISPLAYS AND VOICE CONTROL
}}
* Option/accessory.
81
Driver display
The driver display shows information about
the car and driving.
The driver display contains gauges, indicators
and indicator and warning symbols. The con-
tent of the driver display depends on the car's
equipment, settings and which functions are
active at that time.
The driver display is activated as soon as a
door is opened, i.e. in ignition position
0
. The
driver display extinguishes after a while if it is
not used. To reactivate it, proceed with one of
the following:
•
Depress the brake pedal.
•
Activate ignition position
I
.
•
Open one of the doors.
WARNING
If the driver display should extinguish, not
illuminate on activation/start or be fully or
partially illegible, the car must not be used.
You should visit a workshop immediately.
Volvo recommends an authorised Volvo
workshop.
WARNING
In the event of a fault in the driver display
the information on e.g. brakes, airbags or
other safety systems may not be shown. In
which case, the driver cannot check the
status of the car's systems or receive cur-
rent warnings and information.
The figure is schematic - parts may vary depending
on car model.
Location in the driver display:
On the left
In the middle
On the right
Speedometer
Indicator and warning symbols
Tachometer/Hybrid gauge
A
Trip meter
Outside temperature gauge
Gear shift indicator
Odometer
B
Clock
Drive mode
Cruise control and speed limiter information
Messages, in some cases with graphics
Fuel gauge
Road Sign Information
*
Door and seatbelt information
Hybrid battery gauge
–
Charging status
Distance to empty tank
–
Media player
Distance to empty battery
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DISPLAYS AND VOICE CONTROL
* Option/accessory.
82
On the left
In the middle
On the right
–
Navigation map
*
Instantaneous fuel consumption
–
Phone
App menu (activated via steering wheel keypad)
–
Voice recognition
–
A
Depends on drive mode selected.
B
Accumulated mileage.
Dynamic symbol
The dynamic symbol in its
basic form.
The centre of the driver display contains a
dynamic symbol that changes appearance for
different types of message. An amber or red
marker around the symbol indicates the
degree of severity of a control or warning mes-
sage.
Examples of indicator symbol.
With an animation, the basic shape can be
turned into a graphic showing where a prob-
lem is situated, or in order to clarify informa-
tion.
Related information
•
Driver display settings (p. 83)
•
Warning symbols in the driver display
(p. 94)
•
Indicator symbols in the driver display
(p. 91)
•
•
Messages in the driver display (p. 103)
•
Handling the application menu in the
driver display (p. 102)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
* Option/accessory.
83
Driver display settings
Settings for the driver display's display
options can be made via the driver display's
application menu and via the centre display's
settings menu.
Settings via the driver display's app
menu
The figure is schematic - parts may vary depending
on car model.
The app menu is opened and controlled using
the right-hand keypad on the steering wheel.
In the app menu, you can choose which infor-
mation is shown on the driver display from:
•
trip computer
•
media player
•
phone
•
navigation system
*
.
Settings via the centre display
Selecting information type
1. Tap on
Settings
in the centre display's
top view.
2. Press
My Car
Displays
Driver
Display Information
.
3. Select what should be shown in the back-
ground:
•
Show no information in background
•
Show information for current
playing media
•
Show navigation even if no route is
set
Selecting theme
1. Tap on
Settings
in the centre display's
top view.
2. Tap on
My Car
Displays
Display
Themes
.
3. Select a theme (appearance) for the driver
display:
•
Glass
•
Minimalistic
•
Performance
•
Chrome Rings
Selecting language
1. Tap on
Settings
in the centre display's
top view.
2. Tap on
System
System Languages
and Units
System Language
to select
language.
> A change will affect the language in all
displays.
These settings are personal and are saved
automatically to the active driver profile.
Related information
•
•
Handling the application menu in the
driver display (p. 102)
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
84
Fuel gauge
The fuel gauge in the driver display shows the
fuel level in the tank.
The figure is schematic - parts may vary depending
on car model.
The beige zone in the fuel gauge indicates the
quantity of fuel in the tank.
When the fuel level is low and it is soon time
to refuel, the fuel pump symbol illuminates
and changes to amber. The trip computer also
indicates the distance to empty tank.
Related information
•
•
•
•
Hybrid gauge
In drive modes Hybrid and Pure, the driver
display shows a hybrid gauge that can help
the driver to drive the car in a more energy-
efficient way.
The hybrid gauge shows in different ways the
relationship between how much power is
being taken from the electric motor and how
much power is available.
Symbols in the hybrid gauge
Indicates current level for available
electric motor power. If the symbol
is filled in, it means that the electric
motor is in use.
If the symbol is not filled in, it means
that the electric motor is not in use.
Indicates the power level when the
combustion engine starts. If the
symbol is filled in, it means that the
combustion engine is in use.
Indicates the power level when the
internal combustion engine is due to
start. If the symbol is not filled in, it
means that the combustion engine is
not in use.
Indicator that shows that the hybrid
battery is being charged, e.g. if the
brake pedal is gently depressed.
Driver-requested power
The pointer in the hybrid gauge indicates the
amount of engine power requested by the
driver by regulating the accelerator pedal. The
higher the reading on the scale, the more
power is requested by the driver in the current
gear. The marker between the lightning flash
and the drop shows the point at which the
internal combustion engine starts.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
}}
85
Example:
The car is started but stationary, no power is reques-
ted.
The electric motor cannot supply the amount of
engine power requested and the internal combustion
engine starts.
The car generates current to the battery, the battery
is charged, e.g. when the brake pedal is pressed
lightly or during engine braking down a hill.
Related information
•
•
•
•
Starting and stopping the combustion
engine in Twin Engine (p. 457)
Hybrid battery gauge
The hybrid battery gauge shows how much
energy there is in the hybrid battery.
The energy in the hybrid battery is used for the
electric motor, but also to cool or heat the car.
The trip computer calculates an approximate
distance for the energy left in the hybrid bat-
tery.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DISPLAYS AND VOICE CONTROL
86
Symbols in the hybrid battery gauge
The
symbol in the hybrid battery gauge
indicates that the
Hold
function is activated,
and the
symbol indicates that the
Charge
function is activated.
Related information
•
•
Charging the hybrid battery (p. 415)
•
Hold and Charge function (p. 468)
Trip computer
The car's trip computer records vales such as
e.g. distance, fuel consumption and average
speed whilst driving.
In order to facilitate fuel-efficient driving, infor-
mation is recorded about both instantaneous
and average fuel consumption. The informa-
tion from the trip computer can be shown in
the driver display.
Examples of trip computer information in the driver
display. The figure is schematic - parts may vary
depending on car model.
The following meters are included in the trip
computer:
•
Trip meter
•
Odometer
•
Instantaneous fuel consumption
•
Distance to empty tank
•
Distance to empty battery
•
Tourist - alternative speedometer
Units for distance, speed, etc. can be changed
via system settings in the centre display.
Trip meter
There are two trip meters, TM and TA.
TM can be reset manually and TA is reset
automatically if the car is not used for at least
four hours.
The following information is registered while
driving:
•
Mileage
•
Driving time
•
Average speed
•
Average fuel consumption
The values apply from the trip meter's latest
reset.
Odometer
The odometer records the car's total mileage.
This value cannot be reset to zero.
Instantaneous fuel consumption
This gauge shows the fuel consumption that
the car has at the moment. The value is upda-
ted approximately every second.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
87
Distance to empty tank
The trip computer calculates the
remaining mileage with the fuel
available in the tank.
The calculation is based on the average fuel
consumption over the last 30 km (20 miles)
and the remaining drivable fuel quantity.
When the gauge shows "----", there is not
enough fuel left to be able to calculate the
remaining mileage. Refuel as soon as possible.
There may be a slight deviation if the driv-
ing style has been changed.
An economic driving style generally results in a
longer driving distance.
Distance to empty battery
The approximate distance that can
be driven with the remaining amount
of energy in the hybrid battery is
indicated adjacent to this symbol.
The calculation is based on the average con-
sumption of normally loaded vehicle, during
normal driving and taking into account
whether the air conditioning (AC) is switched
on or off. When changing between the
Hybrid
and
Pure
drive modes, the calculated distance
increases since the
Pure
mode has reduced
climate settings (ECO climate).
No guaranteed range on electric power
remains when the gauge shows "----".
There may be a slight deviation if the driv-
ing style has been changed.
An economic driving style generally results in a
longer driving distance.
Start value for fully charged hybrid battery
Since it is difficult to anticipate driving style
and other factors that affect the range for
electric operation, Volvo has decided to use a
start value when the car is fully charged. The
start value indicates an up-to figure instead of
a forecast for the range for electric operation.
The difference in start value between
Hybrid
and
Pure
is due to the car being allowed to
use more energy from the hybrid battery in
Pure
mode, as well as that the car changes
over to ECO climate.
Mileage for electric operation
In order to achieve the longest possible mile-
age for electric operation, the driver of an elec-
trically powered car also has to think about
energy conservation. The more consumers
there are (stereo, electric heating in windows/
mirrors/seats, very cold air from the climate
control system, etc.) that are active - the
shorter the potential mileage.
In addition to high current take-off in the
passenger compartment, sudden accelera-
tion and braking, high speed, heavy loads,
low outside temperature and uphill gradi-
ents also reduce the possible driving dis-
tance.
Tourist - alternative speedometer
The alternative digital speedometer makes it
easier to drive in countries where speed limit
signs are in a different unit than that shown in
the car's instruments.
The digital speed is then shown in the oppo-
site unit to that shown in the analogue speed-
ometer. If the analogue speedometer is gradu-
ated in
mph
, the digital speedometer shows
the corresponding speed in
km/h
and vice
versa.
Related information
•
Show trip data in the driver display
(p. 88)
•
Resetting the trip meter (p. 89)
•
Show trip statistics in the centre display
(p. 89)
•
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
88
Show trip data in the driver display
The trip computer's recorded and calculated
values can be shown in the driver display.
The values are saved in a trip computer app.
Via the app menu, you can choose which
information is shown on the driver display.
Open and navigate in the app menu
1
using the right-
hand steering wheel keypad.
App menu
Left/right
Up/down
Confirm
1. Open the app menu in the driver display
by pressing (1).
(It is not possible to open the app menu
while there is an unacknowledged mes-
sage in the driver display. The message
first has to be confirmed by pressing the
O
button (4) before the app menu can be
opened.)
2. Navigate to the trip computer app to left
or right with (2).
> The top four menu rows show meas-
ured values for trip meter TM. The next
four menu rows show measured values
for trip meter TA. Scroll up or down in
the list with (3).
3. Scroll down to the option buttons to
select which information to show in the
driver display:
•
Odometer
•
Distance to empty tank
•
Distance to empty battery
•
Tourist (alternative speedometer)
•
Mileage for trip meter TM, TA, or no
display of mileage
•
Instantaneous fuel consumption, aver-
age consumption for TM or TA, alterna-
tively, no display of fuel consumption
Select or deselect an option with the
O
button (4). The change is made immedi-
ately.
Related information
•
•
Resetting the trip meter (p. 89)
1
The figure is schematic - parts may vary depending on car model.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
89
Resetting the trip meter
Reset the trip meter using the left-hand stalk
switch.
–
Reset all information in trip meter TM (i.e.
mileage, average consumption, average
speed and driving time) with a long press
on the
RESET
button on the left-hand
stalk switch.
A short press on the
RESET
button resets
only the mileage.
The trip meter TA can only be reset automati-
cally when the car has not been used for four
or more hours.
Related information
•
Show trip statistics in the centre
display
Trip statistics from the trip computer are dis-
played graphically in the centre display and
provide an overview that facilitates more fuel-
efficient driving.
Open the
Driver
performance
app in app
view in order to show the trip
statistics.
Each bar in the diagram sym-
bolises a distance of 1, 10 or
100 km, alternatively miles. The bars are filled
in from the right as driving progresses. The bar
on the far right shows the value for the current
distance.
The average fuel consumption and total driv-
ing time are calculated since the last time the
trip statistics were reset.
Fuel and electricity consumption are shown in
separate graphs. Electricity consumption is
"net" consumption, i.e. energy consumed
minus regenerated energy created during
braking.
Trip statistics from the trip computer
2
.
When driving with electric operation, fuel
consumption can be indicated in the trip
statistics if the additional heater
3
is run-
ning.
Related information
•
Settings for trip statistics (p. 90)
•
2
The figure is schematic - parts may vary depending on car model.
3
Applicable to fuel-driven auxiliary heater.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
90
Settings for trip statistics
Reset or adjust settings for trip statistics.
1. Open the
Driver performance
app in app
view in order to show the trip statistics.
2. Press
Preferences
to
•
change graph scale. Select resolution 1,
10 or 100 km/miles for the bar.
•
reset data after every trip. Performed
when the car has been stationary for
more than 4 hours.
•
reset data for the current trip.
Trip statistics, calculated average con-
sumption and total driving time are always
reset simultaneously.
Units for distance, speed, etc. can be changed
via system settings in the centre display.
Related information
•
Show trip statistics in the centre display
(p. 89)
•
•
Resetting the trip meter (p. 89)
Date and time
The clock is shown in both the driver display
and the centre display.
Clock location
In certain situations, messages and informa-
tion may cover the clock in the driver display.
In the centre display, the clock is located at
the top right of the status bar.
Date and time settings
–
Select
Settings
System
Date and
Time
in the centre display's top view to
change settings for time and date format.
Adjust the date and time by pressing the
up or down arrow on the touch screen.
Automatic time for cars with GPS
When the car is equipped with a navigation
system,
Auto Time
can be selected. The time
zone is then adjusted automatically based on
the location of the car. For certain types of
navigation systems, the current location
(country) must also be set to obtain the right
time zone. If
Auto Time
is not selected, time
and data are adjusted with arrow up or arrow
down on the touch screen.
Summer time
In certain countries, it is possible to select the
Auto Daylight Saving Time
setting for auto-
matic setting of summer time. For other coun-
tries, the
Daylight Saving Time
setting can
be selected manually.
Related information
•
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
}}
* Option/accessory.
91
Outside temperature gauge
The outside temperature is shown in the
driver display.
A sensor detects the temperature outside of
the car.
If the car has been stationary, the gauge may
display a temperature reading that is too high.
When the outside temperature is in
the range –5 °C to +2 °C (23
°
F to
36
°
F), a snowflake symbol lights up
that warns of potentially slippery
conditions.
The symbol is also illuminated briefly in the
head-up display
*
, if the car is equipped with
one.
Change the unit for the temperature gauge,
etc. via system settings in the centre display's
top view.
Related information
•
•
Changing system units (p. 130)
Indicator symbols in the driver
display
The indicator symbols alert the driver that a
function is activated, that a system is operat-
ing, or that a fault or abnormal condition has
occurred.
Symbol Specification
Information, read display text
When one of the car's systems
does not behave as intended,
this information symbol illumi-
nates and a text appears on the
driver display. The information
symbol can also illuminate in
conjunction with other symbols.
Fault in brake system
The symbol lights up when there
is a fault in the parking brake.
ABS fault
If this symbol illuminates then
the system is not working. The
car's regular brake system con-
tinues to work, but without the
ABS function.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DISPLAYS AND VOICE CONTROL
92
Symbol Specification
Automatic brake on
The symbol illuminates when the
function is activated and the foot
brake or parking brake is acting.
The brake holds the car station-
ary when it has stopped.
Tyre pressure system
The symbol illuminates when tyre
pressure is too low. If there is a
fault in the tyre pressure system,
the symbol will flash for approx. 1
minute and then illuminate with a
constant glow. This may be
because the system cannot
detect or warn of low tyre pres-
sure as intended.
Emissions system
If the symbol illuminates after the
engine has been started then it
may be due to a fault in the car's
emissions system. Drive to a
workshop for checking. Volvo
recommends that an authorised
Volvo workshop is contacted.
Symbol Specification
Left and right-hand direction
indicator
The symbol flashes when the
direction indicators are used.
Position lamps
The symbol lights up when the
position lamps are switched on.
Fault in the headlamp system
The symbol illuminates if a fault
has occurred in the ABL function
(Active Bending Lights) or if
another fault has occurred in the
headlamp system.
Active main beam on
The symbol lights up blue when
active main beam is on.
Active main beam off
The symbol lights up white when
active main beam is off.
Symbol Specification
Main beam On
The symbol illuminates when
main beam is on and with main
beam flash.
Active main beam on
The symbol lights up blue when
active main beam is on. Position
lamps are switched on.
Active main beam off
The symbol lights up white when
active main beam is off. Position
lamps are switched on.
Main beam On
The symbol lights up when main
beam and the position lamps are
switched on.
Front fog lamps on
This symbol illuminates when the
front fog lamp is switched on.
Rear fog lamp on
This symbol illuminates when the
rear fog lamp is switched on.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
93
Symbol Specification
Rain sensor on
This symbol illuminates when the
rain sensor is on.
Preconditioning on
The symbol illuminates when the
engine block and passenger
compartment heater/air condi-
tioning are preconditioning the
car.
Stability system
A flashing symbol indicates that
the stability system is operating.
If the symbol illuminates with
constant glow then there is a
fault in the system.
Symbol Specification
Stability system, sport mode
The symbol illuminates when the
sport mode is activated. Sport
mode allows for a more active
driving experience. The system
then detects whether the accel-
erator pedal, steering wheel
movements and cornering are
more active than in normal driv-
ing and then allows controlled
skidding of the rear section up to
a certain level before it inter-
venes and stabilises the car.
Lane assistance
White symbol: Lane assistance is
on and road lines are detected.
Grey symbol: Lane assistance is
on but road lines are not
detected.
Amber symbol: Lane assistance
warns/intervenes.
Symbol Specification
Lane assistance and rain sen-
sor
White symbol: Lane assistance is
on and road lines are detected.
Rain sensor is on.
Grey symbol: Lane assistance is
on but road lines are not
detected. Rain sensor is on.
Reduced performance
In the event of a temporary pow-
ertrain fault, the car can go into a
Limp home mode with reduced
engine power to prevent damage
to the powertrain.
Related information
•
•
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
94
Warning symbols in the driver
display
The warning symbols alert the driver that an
important function is activated or that a seri-
ous fault or condition exists.
Symbol Specification
Warning
The red warning symbol illumi-
nates when a fault has been indi-
cated which could affect the
safety or drivability of the car. An
explanatory text is shown on the
driver display at the same time.
The warning symbol can also illu-
minate in conjunction with other
symbols.
Seatbelt reminder
This symbol illuminates or
flashes if someone in a front seat
has not put on their seatbelt or if
someone in a rear seat has taken
off their seatbelt.
Symbol Specification
Airbags
If the symbol remains illuminated
or illuminates while driving, a
fault has been detected in one of
the car's safety systems. Read
the message in the driver display.
Volvo recommends that an
authorised Volvo workshop is
contacted.
Fault in brake system
If this symbol illuminates, the
brake fluid level may be too low.
Visit the nearest authorised
workshop to have the brake fluid
level checked and rectified.
Parking brake applied
This symbol illuminates with a
constant glow when the parking
brake is applied.
A flashing symbol means that a
fault has arisen. Read the mes-
sage in the driver display.
Symbol Specification
Low oil pressure
If this symbol illuminates while
driving when the engine's oil
pressure is too low. Stop the
engine immediately and check
the engine oil level, top up if nec-
essary. If the symbol illuminates
and the oil level is normal, con-
tact a workshop. Volvo recom-
mends that an authorised Volvo
workshop is contacted.
Alternator not charging
This symbol illuminates during
driving if a fault has occurred in
the electrical system. Visit a
workshop. Volvo recommends
that an authorised Volvo work-
shop is contacted.
Collision risk
City Safety warns of a risk of col-
lision with other vehicles, pedes-
trians, cyclists or large animals.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DISPLAYS AND VOICE CONTROL
}}
95
Symbol Specification
System malfunction
The symbol illuminates while
driving if there is something
wrong in the drive system. An
explanatory text is shown on the
driver display at the same time.
High engine temperature
The symbol switches on while
driving when the temperature of
the engine is too high. An explan-
atory text is shown on the driver
display at the same time.
Related information
•
Indicator symbols in the driver display
(p. 91)
•
License agreement for the driver
display
A license is an agreement for the right to
operate a certain activity or the right to use
someone else's entitlement according to the
terms and conditions in the agreement. The
following text is Volvo's agreement with the
manufacturer or developer.
Boost Software License 1.0
Permission is hereby granted, free of charge,
to any person or organization obtaining a copy
of the software and accompanying
documentation covered by this license (the
"Software") to use, reproduce, display,
distribute, execute, and transmit the Software,
and to prepare derivative works of the
Software, and to permit third-parties to whom
the Software is furnished to do so, all subject
to the following: The copyright notices in the
Software and this entire statement, including
the above license grant, this restriction and
the following disclaimer, must be included in
all copies of the Software, in whole or in part,
and all derivative works of the Software,
unless such copies or derivative works are
solely in the form of machine-executable
object code generated by a source language
processor.
THE SOFTWARE IS PROVIDED "AS IS",
WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE AND NON-
INFRINGEMENT. IN NO EVENT SHALL THE
COPYRIGHT HOLDERS OR ANYONE
DISTRIBUTING THE SOFTWARE BE LIABLE
FOR ANY DAMAGES OR OTHER LIABILITY,
WHETHER IN CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR
IN CONNECTION WITH THE SOFTWARE OR
THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
||
DISPLAYS AND VOICE CONTROL
96
BSD 4-clause "Original" or "Old" License
Copyright (c) 1982, 1986, 1990, 1991, 1993
The Regents of the University of California. All
rights reserved.
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met:
1. Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
disclaimer in the documentation and/or
other materials provided with the
distribution.
3. All advertising materials mentioning
features or use of this software must
display the following acknowledgement:
This product includes software developed
by the University of California, Berkeley
and its contributors.
4. Neither the name of the University nor the
names of its contributors may be used to
endorse or promote products derived from
this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE
REGENTS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE
REGENTS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
BSD 3-clause "New" or "Revised" License
Copyright (c) 2011-2014, Yann Collet.
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met:
1. Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice, this
list of conditions and the following
disclaimer in the documentation and/or
other materials provided with the
distribution.
3. Neither the name of the organisation nor
the names of its contributors may be used
to endorse or promote products derive
from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT
HOLDER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст