Ford Focus RS (2011 year). Instruction — part 120
Body and Frame — 2.5L Duratec-RS (VI5) – Overview
Introduction
With model year 2009.25, the Ford Focus range
is being extended by a particularly
high-performance sporty RS version (Racing
Sport).
The Ford Focus RS uses the 5-cylinder petrol
engine familiar from the Focus ST. The designation
for this power unit is: 2.5L Duratec-RS (VI5). The
2.5L Duratec-RS (VI5) has a power output of 224
kW (305 PS) and a torque of 440 Nm.
The 2.5L Duratec-RS (VI5) engine is supplied in
conjunction with a modified 6-speed manual
transaxle (M66). The differential installed up to now
in the 6-speed manual transmission (M66) has
been replaced with a Quaife(r) limited-slip
differential with automatic torque distribution.
A further modification has been made to the
structure of the front axle. Based on the McPherson
strut and spring assembly layout, the front
suspension is a new development: the so-called
"Revo" axle. Together with a Quaife(r)
limited-differential lock, it reduces the drive
influences on the steering.
Focus RS
E112828
• Two-part rear spoiler with integrated LED (light
emitting diode) stoplamp and rear window
washer jet
• New color-coded front and rear bumpers
• Exterior mirror with integral turn signal lamp
• Side skirts
• RS lettering and trims
• All body ancillary components color-coded as
standard
Body Version
• The Focus RS is available as a 3-door version
G1202520en
501-26-
25
and Tolerance Checks
501-26-
25
DESCRIPTION AND OPERATION
E
A
B
C
E112829
D
Description
Item
Height: 1476 mm
A
Track width, front: 1586 mm
B
Track width, rear: 1587 mm
B
Description
Item
Overall width: 2020 mm
C
Wheel base 2640 mm
D
Overall length: 4402 mm
E
Lifting Points
E112832
• The jacking points for raising the vehicle on a
lifting platform are shown in the graphic.
• The vehicle must only be lifted at the marked
position when lifting at the front axle using a
jack. The vehicle must not be raised at the rear
axle using a jack.
NOTE: In order to avoid damage to the side skirts
when raising the vehicle with a lifting platform, the
legs of the lifting platform must only be positioned
at the marked positions.
G1202520en
501-26-
26
and Tolerance Checks
501-26-
26
DESCRIPTION AND OPERATION
Installation Position of Electrical Components
E112831
1
2
3
4
5
6
9
10
11
8
15
12
13
14
16
7
Description
Item
Keyless vehicle module
1
Driver door module
2
Instrument cluster
3
High intensity discharge headlamp module
4
ABS/stability assist module
5
BJB (battery junction box)
6
PCM (powertrain control module)
7
Description
Item
Supplementary instrument cluster
8
Electro-hydraulic power steering module
9
GEM (generic electronic module)
10
Bluetooth(r)/voice control module without
handset holder
11
Audio unit/navigation system
12
G1202520en
501-26-
27
and Tolerance Checks
501-26-
27
DESCRIPTION AND OPERATION
Description
Item
EATC (electronic automatic temperature
control)
13
Passenger door module
14
Description
Item
RCM (restraints control module)
15
Parking aid
16
Body General Information
Front View
E112836
2
1
3
Description
Item
Ventilation slits
1
Finisher
2
Large trapezoidal air inlet
3
• The completely newly designed front bumper
features a generously dimensioned,
grille-covered air inlet in a trapezoidal shape
with a high-gloss piano-black paint finish.
• The trim strip at the front edge of the hood
provides a striking contrast and is also finished
in piano-black.
• Two ventilation slits have been incorporated in
the hood. These provided the engine with
additional cooling.
• The wheel arches of the front and rear fenders
have been enlarged in order to afford enough
space for the 19-inch wheels and to allow for
the increased track width.
• Triangular air vents with the RS emblem are
integrated behind the front wheel arches.
G1202520en
501-26-
28
and Tolerance Checks
501-26-
28
DESCRIPTION AND OPERATION
Rear View
E112837
1
2
3
Description
Item
Split rear spoiler
1
High Mounted Stop Lamp Control
2
Diffuser plate
3
• In order to increase downforce, a diffuser has
been integrated in the lower part of the rear,
along with a split rear spoiler above the rear
window.
• The diffuser is framed by two chrome-plated
end pipes. Small vent openings on both sides
of the rear apron further emphasize the width
of the vehicle.
• The high-mounted stoplamp and the rear
window washer nozzle are integrated in the split
rear spoiler.
G1202520en
501-26-
29
and Tolerance Checks
501-26-
29
DESCRIPTION AND OPERATION
Rear Spoiler
E112838
3
1
2
Description
Item
Rear window washer nozzle
1
High Mounted Stop Lamp Control
2
Attachment bolts
3
• The high-mounted stoplamp uses LEDs rather
than conventional bulbs.
NOTE: The LEDs cannot be replaced individually.
In event of failure the entire stoplamp needs to be
replaced.
• The rear spoiler is attached to the tailgate with
five bolts.
G1202520en
501-26-
30
and Tolerance Checks
501-26-
30
DESCRIPTION AND OPERATION
Body - Dash Cross Member
E116812
10 mm
• The weld bolt on the dash cross member has
to be shortened to get sufficient clearance to
the turbo cooling hose and AC lines.
Body - Front Lower Deflector
• Due to the wider dimension of the RS bumper
cover the lower deflector has to be extended.
• The 4 extensions are riveted to the standard ST
deflector.
G1202520en
501-26-
31
and Tolerance Checks
501-26-
31
DESCRIPTION AND OPERATION
E116813
x16
5mm
E116814
x16
G1202520en
501-26-
32
and Tolerance Checks
501-26-
32
DESCRIPTION AND OPERATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст