Ford Focus RS (2011 year). Instruction — part 17
Item 27
Auto-dimming interior mirror and rain
sensor electrical connectors
1. Disconnect the auto-dimming interior mirror
and rain sensor electrical connectors.
E51018
Item 28
Headliner trim panel
1. Tilt the front seats forward.
2. With the aid of another technician, remove
the headliner through the liftgate opening.
Item 30
Radio frequency (RF) receiver
NOTE: Make a note of the position of the RF
receiver to make sure that it is installed in exactly
the same position as removed.
1. Using a suitable knife, detach the RF receiver
from the headliner.
E51463
Item 32
Roof wiring harness
CAUTIONS:
Take care not to damage the insulation of
the roof wiring harness.
The roof wiring harness must be cut off
the headliner and not pulled or ripped.
Failure to follow this instruction could
result in the incorrect function of electrical
components.
NOTE: Make a note of the position of the roof
wiring harness to make sure that it is installed in
exactly the same position as removed.
1. Using a suitable knife, remove the roof wiring
harness from the headliner.
Item 33
Sun-visor illumination lamps
1. Release the sunvisor illumination lamp
retaining clips.
E51019
Item 34
Rear interior lamp
1. Lever out the rear interior lamp.
MPE0005082
Item 35
Rear window washer tube
CAUTION: Take care not to damage the
rear window washer tube. Failure to follow
this instruction could result in damage to
the headliner.
NOTE: Make a note of the position of the rear
window washer tube to make sure that it is installed
in exactly the same position as removed.
1. Using a suitable knife, remove the rear
window washer tube from the headliner.
G410777en
501-05-
88
Interior Trim and Ornamentation
501-05-
88
REMOVAL AND INSTALLATION
Installation Details
Item 35
Rear window washer tube
CAUTION: The rear window washer tube
must be installed in the same position as
removed.
1. Using a suitable adhesive, bond the rear
window washer tube to the headliner.
Item 32
Roof wiring harness
CAUTION: The roof wiring harness must
be installed in the same position as
removed.
1. Using a suitable adhesive, bond the roof
wiring harness to the headliner.
Item 28
Headliner trim panel
1. With the aid of another technician, install the
headliner.
Item 18
B-pillar trim panels
NOTE: Make sure the B-pillar safety belt height
adjustment lever is aligned with the safety belt
height adjustment mechanism.
E51422
Item 13
Roof wiring harness
1. Using
the Draw cord, feed the roof
wiring
harness
through the NVH material.
Item 11
Noise, vibration and harshness (NVH)
material
1. Reposition the NVH material.
G410777en
501-05-
89
Interior Trim and Ornamentation
501-05-
89
REMOVAL AND INSTALLATION
Rear Quarter Trim Panel — 3-Door
1. Remove the parcel shelf trim panel.
2. Tilt the rear seat cushion forward.
3. Tilt the rear seat backrest forward.
4. Release the rear seat backrest outer pivot
retaining lock.
1. Using a suitable pair of long nose pliers,
press in the retaining clips.
2. Using a suitable flat blade screwdriver,
release the outer locking clip.
3. Using a suitable flat blade screwdriver, rotate
the outer mounting bracket pivot locking
latch.
E51421
1
3
1
2
5.
CAUTION: The rear seat backrest inner
pivot pin has radial grooves. Take care not
to damage the backrest inner pivot bush.
Remove the rear seat backrest.
1. Detach the rear seat backrest outer pivot pin
from the outer mounting bracket.
2. Slide the backrest from the center mounting
bracket.
E50070
1
2
6. Remove the B-pillar trim panel.
T
rim Panel - 3-Door
(501-05 Interior Trim
and Ornamentation, Removal and
Installation).
7. Remove the components in the order
indicated in the following illustration(s) and
table(s).
G410783en
501-05-
90
Interior Trim and Ornamentation
501-05-
90
REMOVAL AND INSTALLATION
For additional information,
refer to:
B-Pillar
E50671
4
1
3
2
Description
Item
Liftgate opening weatherstrip
See Removal Detail
1
Parcel shelf support trim panel retaining
screws
2
Description
Item
Parcel shelf tray support trim panel
See Removal Detail
3
Parcel shelf support trim panel retaining
clips
See Installation Detail
4
G410783en
501-05-
91
Interior Trim and Ornamentation
501-05-
91
REMOVAL AND INSTALLATION
E51574
11
11
9
6
5
38 Nm
8
10
7
Description
Item
Front scuff plate
See Removal Detail
5
Front door opening weatherstrip
See Removal Detail
6
Rear quarter trim panel upper retaining
clips
7
Rear quarter trim panel lower retaining
clips
8
Description
Item
Rear safety belt lower anchor
See Removal Detail
9
Rear quarter trim panel
10
Rear quarter trim panel retaining clips
See Installation Detail
11
8. To install, reverse the removal procedure.
G410783en
501-05-
92
Interior Trim and Ornamentation
501-05-
92
REMOVAL AND INSTALLATION
Removal Details
Item 1
Liftgate opening weatherstrip
1. Detach the liftgate opening weatherstrip.
Item 3
Parcel shelf tray support trim panel
1. Detach the parcel shelf support trim panel.
• Pull the parcel shelf support trim panel away
from the rear quarter body panel to release
the retaining tang from the rear quater glass
trim panel.
• Feed the rear safety belt harness through
the parcel shelf support trim panel.
E50672
Item 5
Front scuff plate
1. Detach the front scuff plate.
Item 6
Front door opening weatherstrip
1. Detach the front door opening weatherstrip.
Item 9
Rear safety belt lower anchor
1. Detach the rear safety belt lower anchor.
Installation Details
Item 11
Rear quarter trim panel retaining clips
1. Install the rear quarter trim panel retaining
clips to the trim panel before the trim panel
is installed to the vehicle.
Item 4
Parcel shelf support trim panel retaining
clips
1. Install the parcel shelf support trim panel
retaining clips to the trim panel before the
trim panel is installed to the vehicle.
G410783en
501-05-
93
Interior Trim and Ornamentation
501-05-
93
REMOVAL AND INSTALLATION
Rear Quarter Trim Panel — 5-Door/Wagon
1. Tilt the rear seat cushion forward.
2. Tilt the rear seat backrest forward.
3. Release the rear seat backrest outer pivot
retaining lock.
1. Using a suitable pair of long nose pliers,
press in the retaining clips.
2. Using a suitable flat blade screwdriver,
release the outer locking clip.
3. Using a suitable flat blade screwdriver, rotate
the outer mounting bracket pivot locking
latch.
E50069
1
1
3
2
4.
CAUTION: The left-hand rear seat
backrest inner pivot pin has radial grooves.
Take care not to damage the backrest inner
pivot bushing.
Remove the rear seat backrest.
1. Detach the rear seat backrest outer pivot pin
from the outer mounting bracket.
2. Slide the backrest from the center mounting
bracket.
E50070
1
2
5. Remove the components in the order
indicated in the following illustration(s) and
table(s).
E51416
3
4
4
1
2
G410784en
501-05-
94
Interior Trim and Ornamentation
501-05-
94
REMOVAL AND INSTALLATION
Description
Item
Rear door opening weatherstrip
See Removal Detail
1
Rear quarter trim panel retaining clips
2
Description
Item
Rear quarter trim panel
See Removal Detail
3
Rear quarter trim panel retaining clips
See Installation Detail
4
6. To install, reverse the removal procedure.
Removal Details
Item 1
Rear door opening weatherstrip
1. Detach the rear door opening weatherstrip.
Item 3
Rear quarter trim panel
CAUTION: When removing the rear quarter
trim panel from under the rear parcel shelf
support trim panel, do not place excessive
strain on the rear quarter trim panel
retaining clip mouldings.
Installation Details
Item 4
Rear quarter trim panel retaining clips
1. Install the rear quarter trim panel retaining
clips to the rear quarter trim panel before the
rear quarter trim panel is installed to the
vehicle.
G410784en
501-05-
95
Interior Trim and Ornamentation
501-05-
95
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст