Ford Focus RS (2011 year). Instruction — part 123
5. Body dimensions, side view (3-door version)
• All dimensions have a tolerance of ± 3 mm.
All dimensions were determined starting from
the edge of the steel panel using a
symmetrically adjusted measuring gauge.
• Measuring points 1, 2, 4 and 5 are measured
in the curve and represent the greatest
distance to the measuring point opposite.
• The detail views of measuring points 3 and
6 are shown looking from the vehicle interior
outwards.
Measuring points and dimensions
3 - 6 = 1068 mm
1 - 4 = 1234 mm
2 - 5 = 1439 mm
G371030en
501-26-
49
and Tolerance Checks
501-26-
49
GENERAL PROCEDURES
E54962
1
4
5
6
3
2
3
4
2
1
5
6
6. Body dimensions, rear (3-door version)
• All dimensions have a tolerance of ± 3 mm.
All dimensions were determined starting from
the center of the welded flange using a
symmetrically adjusted measuring gauge.
G371030en
501-26-
50
and Tolerance Checks
501-26-
50
GENERAL PROCEDURES
Measuring points and dimensions
3 - 6 = 1327 mm
1 - 4 = 1115 mm
2 - 5 = 996 mm
E54963
1
2
3
4
5
6
7. Body dimensions, interior (3-door version)
• All dimensions have a tolerance of ± 3 mm.
All dimensions were determined starting from
G371030en
501-26-
51
and Tolerance Checks
501-26-
51
GENERAL PROCEDURES
the center of the welded flange using a
symmetrically adjusted measuring gauge.
Measuring points and dimensions
2 - 3 = 1442 mm
1 - 4 = 1460 mm
2
3
1
4
E54965
8. Body dimensions, side view (4-door version)
• All dimensions have a tolerance of ± 3 mm.
All dimensions were determined starting from
the edge of the steel panel using a
symmetrically adjusted measuring gauge.
• Measuring points 1, 2, 3, 4, 6, 7, 10 and 11
are measured in the curve and represent the
greatest distance to the measuring point
opposite.
• The detail views of measuring points 5, 8, 9
and 12 are shown looking from the vehicle
interior outwards.
Measuring points and dimensions
4 - 7 = 1095 mm
1 - 10 = 992 mm
5 - 8 = 711 mm
2 - 11 = 1281 mm
9 - 12 = 838 mm
3 - 6 = 1025 mm
G371030en
501-26-
52
and Tolerance Checks
501-26-
52
GENERAL PROCEDURES
E62630
1
3
2
10
11
12
7
6
9
8
5
4
5
6
7
9
8
10
2
1
3
4
11
12
9. Body dimensions, rear (4-door version)
• All dimensions have a tolerance of ± 3 mm.
All dimensions were determined starting from
the center of the welded flange using a
symmetrically adjusted measuring gauge.
G371030en
501-26-
53
and Tolerance Checks
501-26-
53
GENERAL PROCEDURES
• Measurement points 1 and 4 are measured
in the curve and correspond to the largest
distance to the opposite measurement point.
• Measurement point 6 is measured from the
center of the hole.
Measuring points and dimensions
5 - 9 = 1043 mm
1 - 4 = 1324 mm
6 - 9 = 1212 mm
2 - 3 = 824 mm
7 - 10 = 960 mm
3 - 8 = 512 mm
G371030en
501-26-
54
and Tolerance Checks
501-26-
54
GENERAL PROCEDURES
2
3
9
6
4
1
5
E62634
7
8
10
10. Body dimensions, interior (4-door version)
• All dimensions have a tolerance of ± 3 mm.
All dimensions were determined starting from
the center of the welded flange using a
symmetrically adjusted measuring gauge.
G371030en
501-26-
55
and Tolerance Checks
501-26-
55
GENERAL PROCEDURES
Measuring points and dimensions
5 - 6 = 1441 mm
1 - 4 = 1458 mm
2 - 3 = 1442 mm
2
3
6
5
4
1
E62635
11. Body dimensions, side view (wagon)
• All dimensions have a tolerance of ± 3 mm.
All dimensions were determined starting from
G371030en
501-26-
56
and Tolerance Checks
501-26-
56
GENERAL PROCEDURES
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст