Ford Focus RS (2011 year). Instruction — part 82
Roof Opening Panel Rear Drain Hose — 3-Door/5-Door
Removal
1. Remove the headliner.
For additional information,
refer to: Headliner
- 3-Door, Vehicles With: Sliding Roof
Opening Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation)
2. Remove the load space trim panel.
For additional information,
refer to:
Loadspace Trim Panel - 3-Door
(501-05
Interior Trim and Ornamentation, Removal
and Installation)
3. Detach the roof opening panel rear drain
hose from the roof opening panel.
TIE0020795
4. Detach the roof opening panel rear drain
hose from the retaining clips (3 door shown).
E49993
5. Detach the roof opening panel rear drain
hose from the drain bung.
E50224
6. Remove the roof opening panel rear drain
hose.
E49994
Installation
1. NOTE: Make sure that the drain bung is free
of foreign material before installing the roof
opening panel rear drain hose.
Attach the roof opening panel rear drain hose
to the drain bung.
1. With the aid of another technician, position
a suitable long bladed screwdriver in the
drain bung from the underside of the vehicle.
2. Push the drain hose over the screwdriver to
position it in the drain bung.
G401863en
501-17-
26
Roof Opening Panel
501-17-
26
REMOVAL AND INSTALLATION
• Remove the screwdriver.
E50951
1
2
2. To install, reverse the removal procedure.
G401863en
501-17-
27
Roof Opening Panel
501-17-
27
REMOVAL AND INSTALLATION
Driver Side Roof Opening Panel Front Drain Hose
Removal
1. Remove the headliner.
For additional information,
refer to: Headliner
- 3-Door, Vehicles With: Sliding Roof
Opening Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation)
2. Detach the roof opening panel front drain
hose from the roof opening panel.
TIE0020798
3. Detach the driver side footwell noise,
vibration and harshness (NVH) insulation
material from the A-pillar to gain access to
the A-pillar access hole.
E51633
4. Remove the NVH insulation material from
the A-pillar access hole (part of instrument
panel removed for clarity).
E51635
5. Detach the roof opening panel front drain
hose and drain hose valve from the A-pillar
and position them in the A-pillar access hole
(part of the instrument panel removed for
clarity).
E51632
6. NOTE: Do not remove the roof opening
panel front drain hose at this stage.
NOTE: The new and the original roof opening panel
drain hoses must be connected before the original
roof opening panel front drain hose is removed
from the A-pillar, to aid installation.
G413434en
501-17-
28
Roof Opening Panel
501-17-
28
REMOVAL AND INSTALLATION
Remove the drain hose valve (part of the
instrument panel removed for clarity).
E51636
Installation
1. NOTE: Apply a suitable lubricant to the new
roof opening panel front drain hose, to aid
installation.
Using suitable tape, attach the new roof
opening panel front drain hose to the original
roof opening panel front drain hose at the
roof opening panel.
E51644
2. NOTE: Make sure that a minimum of 200 mm
of the new roof opening panel front drain
hose remains at the roof opening panel.
With the aid of another technician, detach
the original roof opening panel front drain
hose from the A-pillar (part of the instrument
panel removed for clarity).
• Pull the drain hose into the driver footwell
through the A-pillar access hole.
E51634
3. Remove the original roof opening panel front
drain hose (part of the instrument panel
removed for clarity).
E51637
4. Attach the drain hose valve to the roof
opening panel front drain hose (part of the
instrument panel removed for clarity).
E51636
G413434en
501-17-
29
Roof Opening Panel
501-17-
29
REMOVAL AND INSTALLATION
5. Install the roof opening panel front drain
hose and drain hose valve (part of the
instrument panel removed for clarity).
E51638
6. Install the NVH insulation material to the
A-pillar access hole (part of the instrument
panel removed for clarity).
E51635
7. Attach the driver side footwell NVH insulation
material to the A-pillar.
E51633
8. Attach the roof opening panel front drain
hose to the roof opening panel.
TIE0020798
9. Install the headliner.
For additional information,
refer to: Headliner
- 3-Door, Vehicles With: Sliding Roof
Opening Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation)
G413434en
501-17-
30
Roof Opening Panel
501-17-
30
REMOVAL AND INSTALLATION
Passenger Side Roof Opening Panel Front Drain Hose
Removal
1. Remove the headliner. For additional
information, refer to: (501-05 Interior Trim
and Ornamentation)
Headliner - 3-Door, Vehicles With: Sliding
Roof Opening Panel
(Removal and
Installation),
2. Detach the roof opening panel front drain
hose from the roof opening panel.
TIE0020798
3. Remove the glove compartment lid.
1. Detach the glove compartment lid damper
from the glove compartment lid hinge (if
equipped).
2. Detach the glove compartment lid hinges.
E52551
2
1
4. Detach the passenger side footwell noise,
vibration and harshness (NVH) insulation
material from the A-pillar to gain access to
the A-pillar access hole.
E51640
5. Remove the NVH insulation material from
the A-pillar access hole.
E51642
6. Detach the roof opening panel front drain
hose and roof opening panel front drain hose
valve from the A-pillar and position them in
the A-pillar access hole.
E51639
G413435en
501-17-
31
Roof Opening Panel
501-17-
31
REMOVAL AND INSTALLATION
7. NOTE: Do not remove the roof opening panel
front drain hose at this stage.
NOTE: The new and the original roof opening panel
drain hoses must be connected together before
the original roof opening panel front drain hose is
removed from the A-pillar, to aid installation.
Remove the roof opening panel front drain
hose valve.
E51643
Installation
1. NOTE: Apply a suitable lubricant to the new
roof opening panel front drain hose, to aid
installation.
Using suitable tape, attach the new roof
opening panel front drain hose to the original
roof opening panel front drain hose at the
roof opening panel.
E51644
2. NOTE: Make sure that a minimum of 200 mm
of the new roof opening panel front drain
hose remains at the roof opening panel.
With the aid of another technician, detach
the original roof opening panel front drain
hose from the A-pillar.
• Pull the roof opening panel front drain hose
into the passenger footwell through the
A-pillar access hole.
E51641
3. Remove and discard the original roof
opening panel front drain hose and tape.
E51645
4. Install the roof opening panel front drain
hose valve.
E51643
G413435en
501-17-
32
Roof Opening Panel
501-17-
32
REMOVAL AND INSTALLATION
5. Attach the roof opening panel front drain
hose and roof opening panel front drain hose
valve to the A-pillar.
E51649
6. Install the NVH insulation material to the
A-pillar access hole.
E51642
7. Attach the passenger side footwell NVH
insulation material to the A-pillar.
E51640
8. Install the glove compartment lid.
1. Attach the glove compartment lid hinges.
2. Attach the glove compartment lid damper to
the glove compartment lid hinge (if
equipped).
E52552
1
2
9. Attach the roof opening panel front drain
hose to the roof opening panel.
TIE0020798
10. Install the headliner. For additional
information, refer to: (501-05 Interior Trim
and Ornamentation)
Headliner - 3-Door, Vehicles With: Sliding
Roof Opening Panel
(Removal and
Installation),
G413435en
501-17-
33
Roof Opening Panel
501-17-
33
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст