Ford Focus RS (2011 year). Instruction — part 57
harness from the front door handle
reinforcement.
E52077
Item 15
Front door lock cylinder position sensor
electrical connector
1. Disconnect the front door lock cylinder
position sensor electrical connector.
E52031
Item 16
Front door handle reinforcement
1. Detach the front door handle reinforcement
from the front door handle, lock and latch
retaining bracket.
E51956
Item 17
Front door lock cylinder actuator rod
1. Detach the front door lock cylinder actuator
rod from the front door handle reinforcement.
E51959
Item 18
Front door exterior handle remote
control cable
1. Detach the front door exterior handle remote
control cable from the front door handle
reinforcement.
1. Using a suitable flat blade screwdriver,
release the front door exterior handle remote
control cable retaining clips.
2. Slide the front door exterior handle remote
control cable off of the front door handle
reinforcement retainers.
E51957
1
1
2
G413505en
501-14-
135
Handles, Locks, Latches and Entry Systems
501-14-
135
REMOVAL AND INSTALLATION
2. Align the front door exterior handle remote
control inner cable with the slot in the front
door handle reinforcement and remove.
E51958
Installation Details
Item 13
Front door inner panel
1. Before installing the front door inner panel
retaining bolts, feed the door wiring harness
electrical connector through the front door
wiring harness hole.
Item 12
Front door lock actuator retaining screw
1. Install the front door lock actuator to the
front door.
2. Tighten the front door lock actuator retaining
screw.
Item 5
Door hinge retaining bolts.
1. Apply a coating of
adhesive to
the door hinge
retaining bolts.
G413505en
501-14-
136
Handles, Locks, Latches and Entry Systems
501-14-
136
REMOVAL AND INSTALLATION
Front Door Lock Actuator — 4-Door/5-Door/Wagon
General Equipment
Trolley jack
Materials
Specification
Name
WSK-M2G349-A7
Adhesive - Loctite 243
1. Remove the front door trim panel.
For additional information,
refer to: Front
Door Trim Panel - 4-Door/5-Door/Wagon
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
2. Remove the exterior front door handle.
For additional information,
refer to: Exterior
Front Door Handle
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
3. Connect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General Procedures).
4. Remove the front door window regulator
grommets.
E42003
5. NOTE: Support the front door power window
control unit.
Connect the front door power window control
unit electrical connector.
E39524
6. Using the front door power window control
unit, align the front door window glass clamp
bolts with the access holes.
E42003
7. Loosen the front door window glass clamp
retaining bolts.
TIE39519
8 Nm
G413510en
501-14-
137
Handles, Locks, Latches and Entry Systems
501-14-
137
REMOVAL AND INSTALLATION
8. Disconnect the front door power window
control unit electrical connector.
E39524
9. Raise the front door window glass.
10. Using suitable tape, secure the front door
window glass to the front door.
E42004
11. Disconnect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General
Procedures).
12. Remove the components in the order
indicated in the following illustration(s) and
table(s).
E51757
G413510en
501-14-
138
Handles, Locks, Latches and Entry Systems
501-14-
138
REMOVAL AND INSTALLATION
Description
Item
Exterior mirror interior trim panel
See Removal Detail
1
Front door tweeter speaker electrical
2
Description
Item
connector
Exterior mirror electrical connector (if
equipped)
3
E47359
6
15 Nm
5
15 Nm
23 Nm
4
N
5
N
G413510en
501-14-
139
Handles, Locks, Latches and Entry Systems
501-14-
139
REMOVAL AND INSTALLATION
Description
Item
Door check strap
4
Door hinge retaining bolts
See Removal Detail
5
Description
Item
See Installation Detail
Door
See Removal Detail
6
E52072
8
10
8 Nm
7
8 Nm
13
12
9
11
7
Description
Item
Front door handle, lock and latch retaining
bracket retaining screws
7
Front door latch retaining bolts
8
Front door wiring harness retaining clip
See Removal Detail
9
Front door latch remote control cable
See Removal Detail
10
Description
Item
Front door wiring harness
See Removal Detail
11
Front door lock actuator retaining screw
See Removal Detail
See Installation Detail
12
Front door inner panel
See Removal Detail
See Installation Detail
13
G413510en
501-14-
140
Handles, Locks, Latches and Entry Systems
501-14-
140
REMOVAL AND INSTALLATION
E51993
14
15
16
Description
Item
Front door lock actuator
See Removal Detail
14
Front door lock cylinder actuator rod
See Removal Detail
15
Front door exterior handle remote control
cable
See Removal Detail
16
13. To install, reverse the removal procedure.
14. Vehicles with global closing, initialize the
door window motors.
For additional information,
refer to: Door
Window Motor Initialization
(501-11 Glass,
Frames and Mechanisms, General
Procedures).
Removal Details
Item 1
Exterior mirror interior trim panel
CAUTION: Do not place excessive strain
on the exterior mirror and front door
tweeter speaker wiring harness.
Item 5
Door hinge retaining bolts
TIE41214
G413510en
501-14-
141
Handles, Locks, Latches and Entry Systems
501-14-
141
REMOVAL AND INSTALLATION
1.
CAUTION: Protect the door using a soft
cloth to prevent damage to the front door.
With the aid of another technician and a
suitable trolley jack, support and detach the
front door from the front door hinges.
Item 6
Door
1. Detach the front door wiring harness from
the A-pillar.
TIE41215
2. Disconnect the front door wiring harness
electrical connector.
TIE41216
3.
CAUTION: After the front door wiring
harness electrical connector has been
disconnected, position the front door back
onto the front door hinges. Failure to follow
this instruction may cause damage to the
front door.
Position the front door onto the front door
hinges.
Item 9
Front door wiring harness retaining clip
1. Detach the front door wiring harness
retaining clip from the front door.
E47330
Item 10
Front door latch remote control cable
1. Using a suitable screwdriver, latch the front
door lock into the closed position.
E52756
2. Detach the front door latch remote control
cable from the front door latch remote
control handle.
1. Operate the door latch remote control handle
lock to the lock position.
2. Release the remote control cable retaining
clips.
G413510en
501-14-
142
Handles, Locks, Latches and Entry Systems
501-14-
142
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст