Ford Focus RS (2011 year). Instruction — part 58
3. Detach the inner remote control cable from
the remote control handle lock lever.
E52632
1
2
3
Item 11
Front door wiring harness
1. Detach and push the front door wiring
harness into the front door.
E47360
Item 12
Front door lock actuator retaining screw
1. Detach the front door lock actuator .
1. Loosen the door lock actuator retaining
screw.
2. Release the door lock actuator retaining clip.
3. Slide the door lock actuator towards the front
of the vehicle.
E51955
1
2
3
Item 13
Front door inner panel
CAUTION: When removing the front door
inner panel, care must be taken that the
door wiring harness is not trapped or
placed under excessive strain.
Item 14
Front door lock actuator
1. Detach the front door lock actuator from the
front door handle, lock and latch retaining
bracket.
E51956
Item 15
Front door lock cylinder actuator rod
1. Detach the front door lock cylinder actuator
rod from the front door lock actuator.
E51959
Item 16
Front door exterior handle remote
control cable
1. Detach the front exterior door handle remote
control cable from the front door lock
actuator.
1. Using a suitable flat blade screwdriver,
release the exterior front door handle remote
control cable retaining clips.
G413510en
501-14-
143
Handles, Locks, Latches and Entry Systems
501-14-
143
REMOVAL AND INSTALLATION
2. Slide the exterior front door handle remote
control cable off of the front door lock
actuator.
E51994
1
1
2
2. Align the exterior front door handle remote
control inner cable with the slot in the front
door lock actuator and remove.
E51995
Installation Details
Item 13
Front door inner panel
1. Before installing the front door inner panel
retaining bolts, feed the door wiring harness
electrical connector through the front door
wiring harness hole.
Item 12
Front door lock actuator retaining screw
1. Install the front door lock actuator to the
front door.
2. Tighten the front door lock actuator retaining
screw.
Item 5
Door hinge retaining bolts
1. Apply a coating of
adhesive to
the door hinge
retaining bolts.
G413510en
501-14-
144
Handles, Locks, Latches and Entry Systems
501-14-
144
REMOVAL AND INSTALLATION
Front Door Lock Actuator — 4-Door/5-Door/Wagon, Vehicles With:
Keyless Vehicle System
Materials
Specification
Name
WSK-M2G349-A7
Adhesive - Loctite 243
1. Remove the front door trim panel.
For additional information,
refer to: Front
Door Trim Panel - 4-Door/5-Door/Wagon
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
2. Remove the exterior front door handle.
For additional information,
refer to: Exterior
Front Door Handle - Vehicles With: Keyless
Vehicle System
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
3. Connect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General Procedures).
4. Remove the front door window regulator
grommets.
E42003
5. NOTE: Support the front door power window
control unit.
Connect the front door power window control
switch electrical connector.
E39524
6. Using the front door power window control
switch, align the window glass clamp bolts
with the access holes.
E42003
7. Loosen the front door window glass clamp
retaining bolts.
TIE39519
8 Nm
8. Raise the front door window glass.
G413506en
501-14-
145
Handles, Locks, Latches and Entry Systems
501-14-
145
REMOVAL AND INSTALLATION
9. Disconnect the front door power window
control switch electrical connector.
E39524
10. Using suitable tape, secure the front door
window glass to the front door.
E42004
11. Disconnect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General
Procedures).
12. Remove the components in the order
indicated in the following illustration(s) and
table(s).
E51757
G413506en
501-14-
146
Handles, Locks, Latches and Entry Systems
501-14-
146
REMOVAL AND INSTALLATION
Description
Item
Exterior mirror interior trim panel
See Removal Detail
1
Front door tweeter speaker electrical
2
Description
Item
connector
Exterior mirror electrical connector (if
equipped)
3
E47359
6
15 Nm
5
15 Nm
23 Nm
4
N
5
N
G413506en
501-14-
147
Handles, Locks, Latches and Entry Systems
501-14-
147
REMOVAL AND INSTALLATION
Description
Item
Door check strap
4
Door hinge retaining bolts
See Removal Detail
5
Description
Item
See Installation Detail
Door (left-hand door shown)
See Removal Detail
6
E52072
8
10
8 Nm
7
8 Nm
13
12
9
11
7
Description
Item
Front door handle, lock and latch retaining
bracket retaining screw
7
Front door latch retaining bolts
8
Front door wiring harness retaining clip
See Removal Detail
9
Front door latch remote control cable
See Removal Detail
10
Description
Item
Front door wiring harness
See Removal Detail
11
Front door lock actuator retaining screw
See Removal Detail
See Installation Detail
12
Front door inner panel
See Removal Detail
See Installation Detail
13
G413506en
501-14-
148
Handles, Locks, Latches and Entry Systems
501-14-
148
REMOVAL AND INSTALLATION
E51960
15
16
14
17
18
Description
Item
Exterior front door handle RKE electrical
connector
See Removal Detail
14
Front door lock cylinder position sensor
electrical connector
See Removal Detail
15
Front door handle reinforcement
See Removal Detail
16
Description
Item
Front door lock cylinder actuator rod
See Removal Detail
17
Front door exterior handle remote control
cable
See Removal Detail
18
13. To install, reverse the removal procedure.
Removal Details
Item 1
Exterior mirror interior trim panel
CAUTION: Do not place excessive strain
on the exterior mirror and front door
tweeter speaker wiring harness.
G413506en
501-14-
149
Handles, Locks, Latches and Entry Systems
501-14-
149
REMOVAL AND INSTALLATION
Item 5
Door hinge retaining bolts
TIE41214
1.
CAUTION: Protect the door using a soft
cloth to prevent damage to the front door.
With the aid of another technician and a
suitable trolly jack, support and detach the
front door from the front door hinges.
Item 6
Door (left-hand door shown)
1. Detach the electrical connector from the
A-pillar.
TIE41215
2. Remove the front door.
• Disconnect the electrical connector.
TIE41216
3. Push the front door wiring harness into the
door.
E47281
4.
CAUTION: After the front door wiring
harness electrical connector has been
disconnected, position the front door back
onto the front door hinges. Failure to follow
this instruction may cause damage to the
front door.
Position the front door onto the front door
hinges.
Item 9
Front door wiring harness retaining clip
1. Detach the front door wiring harness
retaining clip from the front door.
E47330
G413506en
501-14-
150
Handles, Locks, Latches and Entry Systems
501-14-
150
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст