Ford Focus RS (2011 year). Instruction — part 68
Item 7
Ignition lock cylinder barrel tumblers
1. NOTE: Make sure to read the key code from
the key entry to the end of the lock barrel in
sequence.
NOTE: Make a note of the position and orientation
of the ignition lock cylinder barrel tumblers.
Remove the ignition lock cylinder barrel
tumblers and springs in the correct order.
E59873
Assembly Details
Item 7
Ignition lock cylinder barrel tumblers
1. NOTE: Make sure to read the key code from
the key entry to the end of the lock barrel in
sequence.
NOTE: One group of tumblers is signed with a one
digit number (1 to 5), the other group of tumblers
is signed with a two digit number (11 to 15).
Assemble the ignition lock cylinder barrel
tumblers and springs in the correct order.
E43309
Item 6
Ignition lock cylinder barrel guide
1. NOTE: Make sure that the ignition lock
cylinder barrel guide indents align with the
ignition lock cylinder barrel guide.
Install the key and the assembled lock
cylinder barrel into the ignition lock cylinder
barrel guide and remove the key.
E43467
Item 5
Ignition lock cylinder retaining clip
1. Install the ignition lock cylinder retaining
clip.
E43471
G328436en
501-14-
223
Handles, Locks, Latches and Entry Systems
501-14-
223
DISASSEMBLY AND ASSEMBLY
Item 3
Ignition lock cylinder retaining clip
1. Install the ignition lock cylinder retaining clip
in the position shown.
E43470
Item 2
Ignition lock cylinder housing
1. Install the ignition lock cylinder housing.
1. Operate the ignition lock cylinder retaining
spring and locking button.
2. Slide the ignition lock cylinder housing onto
from the ignition lock cylinder barrel guide.
E43473
1
1
2
Item 1
Ignition lock cylinder locking button
1. Assemble the ignition lock cylinder locking
button and leaf spring and install in the
position shown.
E97594
2
1
G328436en
501-14-
224
Handles, Locks, Latches and Entry Systems
501-14-
224
DISASSEMBLY AND ASSEMBLY
Door Lock Cylinder
General Equipment
Punch
1. Remove the door lock cylinder.
For additional information,
refer to: Door
Lock Cylinder
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
2. Disassemble the components in the order
indicated in the following illustration(s) and
table(s).
E43865
6
8
5
2
1
1
9
10
3
4
7
9
10
11
G296101en
501-14-
225
Handles, Locks, Latches and Entry Systems
501-14-
225
DISASSEMBLY AND ASSEMBLY
Description
Item
Door lock cylinder barrel locking pins
See Disassembly Detail
See Assembly Detail
1
Door lock cylinder barrel housing
2
Door lock cylinder retaining clip
See Disassembly Detail
See Assembly Detail
3
Door lock cylinder latch actuator
See Assembly Detail
4
Door lock cylinder latch actuator driver
See Assembly Detail
5
Door lock cylinder guide pin retaining
spring
See Assembly Detail
6
Door lock cylinder guide pin
See Assembly Detail
7
Description
Item
Door lock cylinder barrel guide
See Assembly Detail
8
Door lock cylinder barrel tumblers
See Disassembly Detail
See Assembly Detail
9
Door lock cylinder barrel tumbler springs
10
Door lock cylinder barrel
11
3. To assemble, reverse the disassembly
procedure.
4. Install the door lock cylinder.
For additional information,
refer to: Door
Lock Cylinder
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
Disassembly Details
Item 1
Door lock cylinder barrel locking pins
1. Remove the door lock cylinder lower
retaining pin.
E43871
2. Using a suitable
Punch
, remove door lock
cylinder upper retaining pin.
E43870
G296101en
501-14-
226
Handles, Locks, Latches and Entry Systems
501-14-
226
DISASSEMBLY AND ASSEMBLY
Item 3
Door lock cylinder retaining clip
1. Remove the door lock cylinder retaining clip
from the door lock cylinder.
E43866
Item 9
Door lock cylinder barrel tumblers
1. NOTE: Make sure to read the key code from
the key entry to the end of the lock barrel in
sequence.
NOTE: Make a note of the position and orientation
of the door lock cylinder barrel tumblers.
Remove the door lock cylinder barrel
tumblers and springs in the correct order.
E59873
Assembly Details
Item 9
Door lock cylinder barrel tumblers
1. NOTE: Make sure to read the key code from
the key entry to the end of the lock barrel in
sequence.
NOTE: One group of tumblers is signed with a one
digit number (1 to 5), the other group of tumblers
is signed with a two digit number (11 to 15).
Assemble the door lock cylinder barrel
tumblers and springs in the correct order.
E43309
Item 8
Door lock cylinder barrel guide
1. NOTE: Make sure that the door lock cylinder
cover guide indents align with the door lock
cylinder barrel.
Install the key and the assembled lock
cylinder barrel into the door lock cylinder
barrel guide and remove the key.
E43467
G296101en
501-14-
227
Handles, Locks, Latches and Entry Systems
501-14-
227
DISASSEMBLY AND ASSEMBLY
Item 7
Door lock cylinder guide pin
1. Place the door lock cylinder guide pin in the
door lock cylinder barrel guide recess.
E43867
Item 6
Door lock cylinder guide pin retaining
spring
1. Assemble the door lock cylinder guide pin
retaining spring on to the door lock cylinder
barrel guide.
E43868
Item 5
Door lock cylinder latch actuator driver
1. NOTE: Make sure that the door lock cylinder
guide pin retaining spring is located in the
door lock cylinder latch actuator driver
groove.
Install the door lock cylinder latch actuator
driver.
E43869
Item 4
Door lock cylinder latch actuator
NOTE: An audible click can be heard when the
door lock cylinder latch actuator is installed
correctly.
Item 3
Door lock cylinder retaining clip
1. Install the door lock cylinder retaining clip.
E43866
Item 1
Door lock cylinder barrel locking pins
1. NOTE: After the door lock cylinder lower
retaining pin has been installed the door lock
cylinder housing locking pins must be
knocked down, locking the door lock cylinder
lower retaining pin in place.
G296101en
501-14-
228
Handles, Locks, Latches and Entry Systems
501-14-
228
DISASSEMBLY AND ASSEMBLY
Install the door lock cylinder barrel retaining
pin.
E43871
2. Install the door lock cylinder barrel retaining
pin.
E43870
G296101en
501-14-
229
Handles, Locks, Latches and Entry Systems
501-14-
229
DISASSEMBLY AND ASSEMBLY
SECTION 501-16 Wipers and Washers
PAGE
CONTENTS
SPECIFICATIONS
501-16-2
Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
DESCRIPTION AND OPERATION
501-16-3
Wipers and Washers. . . . . . . . . . . . . . . . . . . . . . . . . . ..
501-16-4
Windshield wash/wipe system. . . . . . . . . . . . . . . . . . . . . . .
501-16-5
Rear window wash/wipe system. . . . . . . . . . . . . . . . . . . . . . .
501-16-5
Headlamp washer system. . . . . . . . . . . . . . . . . . . . . . . . ..
DIAGNOSIS AND TESTING
501-16-7
Wipers and Washers. . . . . . . . . . . . . . . . . . . . . . . . . . ..
501-16-7
Description of operation. . . . . . . . . . . . . . . . . . . . . . . . . ..
501-16-8
Inspection and Checking. . . . . . . . . . . . . . . . . . . . . . . . .
501-16-9
Trouble Code Table - Generic Electronic Module (GEM). . . . . . . . . . . . ...
501-16-10
Symptom Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
501-16-12
System Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
501-16-58
Component Tests. . . . . . . . . . . . . . . . . . . . . . . . . . . .
GENERAL PROCEDURES
501-16-60
Windshield Wiper Blade and Pivot Arm Adjustment. . . . . . . . . . . . . . ...
REMOVAL AND INSTALLATION
501-16-62
Windshield Wiper Motor. . . . . . . . . . . . . . . . . . . . . . . . . ..
501-16-64
(32 624 0)
Windshield Washer Pump. . . . . . . . . . . . . . . . . . . ..
501-16-66
Windshield Washer Pump and Reservoir. . . . . . . . . . . . . . . . . . ...
501-16-69
Rear Window Wiper Motor. . . . . . . . . . . . . . . . . . . . . . . . .
501-16-73
Rain Sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
501-16-75
(32 678 0)
Headlamp Washer Jet. . . . . . . . . . . . . . . . . . . . .
501-16-78
Headlamp Washer Pump. . . . . . . . . . . . . . . . . . . . . . . . .
501-16-
Wipers and Washers
501-16-
1
.
VEHICLE APPLICATION:
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст