Ford Focus RS (2011 year). Instruction — part 66
E113368
Installation
1. To install, reverse the removal procedure.
G1224140en
501-14-
207
Handles, Locks, Latches and Entry Systems
501-14-
207
REMOVAL AND INSTALLATION
Keyless Vehicle Rear Bumper Antenna
Removal
1.
Refer to: Jacking
(100-02 Jacking and Lifting,
Description and Operation).
Refer to: Lifting
(100-02 Jacking and Lifting,
Description and Operation).
2.
3.
If equipped.
1.
2. On both sides.
E99377
1
4.
E99591
x2
x2
x2
5.
E76894
x2
Convertible
6.
E76895
1
3
2
2
x3
G1224142en
501-14-
208
Handles, Locks, Latches and Entry Systems
501-14-
208
REMOVAL AND INSTALLATION
7. NOTE: This step requires the aid of another
technician.
E76896
3
x4
2
2
1
3-door, 4-door and 5-door
8.
E99588
x2
1
2
2
x2
3
All vehicles
9.
E119169
Installation
1. To install, reverse the removal procedure.
G1224142en
501-14-
209
Handles, Locks, Latches and Entry Systems
501-14-
209
REMOVAL AND INSTALLATION
Radio Frequency (RF) Receiver
Removal
1.
E119793
2.
G1226581en
501-14-
210
Handles, Locks, Latches and Entry Systems
501-14-
210
REMOVAL AND INSTALLATION
E119794
Installation
1. To install, reverse the removal procedure.
G1226581en
501-14-
211
Handles, Locks, Latches and Entry Systems
501-14-
211
REMOVAL AND INSTALLATION
Hood Lock Cylinder
General Equipment
Punch
NOTE: To obtain the key code, please use either
the driver door lock cylinder, ignition lock cylinder
or tailgate lock cylinder. The hood lock cannot be
used, because two of the ten tumblers have been
removed from the hood lock cylinder.
1. Remove the hood lock cylinder.
For additional information,
refer to: Hood
Lock Cylinder
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
2. Disassemble the components in the order
indicated in the following illustration(s) and
table(s).
E51559
1
2
5
6
7
8
11
12
3
4
12
14
10
9
13
13
G413491en
501-14-
212
Handles, Locks, Latches and Entry Systems
501-14-
212
DISASSEMBLY AND ASSEMBLY
Description
Item
Hood lock cylinder locking pins
See Assembly Detail
1
Hood lock cylinder locking pin
See Assembly Detail
2
Hood lock cylinder housing
3
Hood lock cylinder barrel cover locking
clips
See Disassembly Detail
4
Hood lock cylinder barrel cover
See Assembly Detail
5
Hood lock cylinder return spring
See Disassembly Detail
See Assembly Detail
6
Description
Item
Hood lock cylinder connecting clip
See Assembly Detail
7
Hood lock cylinder washer
8
Hood lock cylinder spring
9
Hood lock cylinder roll pin
10
Hood lock cylinder barrel cover
See Disassembly Detail
See Assembly Detail
11
Hood lock cylinder barrel tumblers
See Disassembly Detail
See Assembly Detail
12
Hood lock cylinder barrel tumbler springs
13
Hood lock cylinder barrel
14
3. To assemble, reverse the disassembly
procedure.
Disassembly Details
Item 1
Hood lock cylinder locking pins
1. Using a suitable
Punch
, remove the hood
lock cylinder
locking pins.
E43524
Item 2
Hood lock cylinder locking pin
1. Using a suitable
Punch
, remove the hood
lock cylinder
locking pin.
E43523
G413491en
501-14-
213
Handles, Locks, Latches and Entry Systems
501-14-
213
DISASSEMBLY AND ASSEMBLY
See Disassembly Detail
See Disassembly Detail
Item 4
Hood lock cylinder barrel cover locking
clips
1. Using a suitable tool, remove the hood lock
cylinder barrel cover locking clips.
E43522
Item 6
Hood lock cylinder return spring
1. NOTE: Make a note of the position of the
hood lock cylinder return spring.
Remove the hood lock cylinder return spring.
E59904
Item 11
Hood lock cylinder barrel cover
1. Remove the hood lock cylinder barrel guide.
E43467
Item 12
Hood lock cylinder barrel tumblers
1. NOTE: Make sure to read the key code from
the key entry to the end of the lock barrel in
sequence.
NOTE: Make a note of the position and orientation
of the hood lock cylinder barrel tumblers.
Remove the hood lock cylinder barrel
tumblers in the correct order.
E59873
Assembly Details
Item 12
Hood lock cylinder barrel tumblers
1. NOTE: Make sure to read the key code from
the key entry to the end of the lock barrel in
sequence.
NOTE: One group of tumblers is signed with a one
digit number (1 to 5), the other group of tumblers
is signed with a two digit number (11 to 15).
G413491en
501-14-
214
Handles, Locks, Latches and Entry Systems
501-14-
214
DISASSEMBLY AND ASSEMBLY
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст