Ford Focus RS (2011 year). Instruction — part 64
E56642
5
6
7
Description
Item
Licence plate illumination panel electrical
connectors
5
Keyless vehicle luggage compartment lid
lock button
See Removal Detail
See Installation Detail
6
Exterior luggage compartment lid release
handle
See Removal Detail
7
3. To install, reverse the removal procedure.
Removal Details
Item 4
Licence plate illumination panel retaining
nuts
1.
CAUTION: Make sure that excessive
strain is not placed on the licence plate
illumination panel electrical connectors and
wiring harnesses.
G458703en
501-14-
191
Handles, Locks, Latches and Entry Systems
501-14-
191
REMOVAL AND INSTALLATION
Detach the licence plate illumination panel
from the luggage compartment lid.
E56640
2. Detach the exterior luggage compartment
release switch wiring harness grommet from
the luggage compartment lid.
E56641
Item 6
Keyless vehicle luggage compartment
lid lock button
1. NOTE: Make a note of the routing of the
keyless vehicle liftgate lock button wiring
harness.
Detach the keyless vehicle luggage
compartment lid lock button from the keyless
vehicle luggage compartment lock button
retainer.
E56890
2. Remove the keyless vehicle luggage
compartment lid lock button and keyless
vehicle luggage compartment lid lock button
retainer from the licence plate illumination
panel.
E56891
Item 7
Exterior luggage compartment lid release
handle
1. Press the clips and remove the luggage
compartment lid release switch from the
licence plate illumination panel.
E56644
G458703en
501-14-
192
Handles, Locks, Latches and Entry Systems
501-14-
192
REMOVAL AND INSTALLATION
Installation Details
Item 6
Keyless vehicle luggage compartment
lid lock button
CAUTION: Make sure the routing of the
keyless vehicle luggage compartment lid
lock button wiring harness is the same as
when removed. Failure to follow this
instruction may result in damage to the
wiring harness.
G458703en
501-14-
193
Handles, Locks, Latches and Entry Systems
501-14-
193
REMOVAL AND INSTALLATION
Ignition Lock Cylinder — Vehicles With: Keyless Vehicle System
Removal
NOTE: Removal steps in this procedure may
contain installation details.
1. If equipped.
E100834
2.
E95563
3.
E118113
4.
E118115
5.
E118112
1
2
6.
E99639
1
2
G1187569en
501-14-
194
Handles, Locks, Latches and Entry Systems
501-14-
194
REMOVAL AND INSTALLATION
7.
E69785
8.
E118117
9.
E118114
10.
E118116
1
2
3
Installation
1. To install, reverse the removal procedure.
G1187569en
501-14-
195
Handles, Locks, Latches and Entry Systems
501-14-
195
REMOVAL AND INSTALLATION
Ignition Lock Cylinder — Vehicles Without: Keyless Vehicle System
1. Remove the passive anti-theft system (PATS)
transceiver.
For additional information, refer
to Section
419-01A [Anti-Theft - Active] /
419-01B [Anti-Theft - Passive].
2. Remove the components in the order
indicated in the following illustration(s) and
table(s).
E41779
3
1
2
Description
Item
Ignition key
See Removal Detail
1
Ignition lock cylinder locking button
See Removal Detail
2
Ignition lock cylinder
See Removal Detail
See Installation Detail
3
3. To install, reverse the removal procedure.
Removal Details
G296082en
501-14-
196
Handles, Locks, Latches and Entry Systems
501-14-
196
REMOVAL AND INSTALLATION
Item 1
Ignition key
1. Turn the ignition key to the ACCESSORY
position.
E41781
1
Item 2
Ignition lock cylinder locking button
1. Using a suitable punch press the ignition
lock cylinder locking button until the ignition
lock cylinder is released from the steering
column.
E41780
1
Item 3
Ignition lock cylinder
1. NOTE: Make sure the ignition lock cylinder
locking button is released before the removal
of the ignition lock cylinder.
Remove the ignition lock cylinder and
ignition key.
Installation Details
Item 3
Ignition lock cylinder
1. Install the ignition lock cylinder.
1. Turn the ignition key to the ACCESSORY
position.
2. Press the ignition lock cylinder locking button.
E42042
1
2
G296082en
501-14-
197
Handles, Locks, Latches and Entry Systems
501-14-
197
REMOVAL AND INSTALLATION
Door Lock Cylinder
1. Remove the components in the order
indicated in the following illustration(s) and
table(s).
1
2
3
E41024
4
Description
Item
Exterior front door handle retaining screw
grommet
1
Exterior front door handle retaining screw
See Removal Detail
See Installation Detail
2
Description
Item
Exterior front door handle trim
3
Door lock cylinder
4
2. To install, reverse the removal procedure.
G296083en
501-14-
198
Handles, Locks, Latches and Entry Systems
501-14-
198
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст