Ford Galaxy / Ford S-MAX. Manual — part 213
23. Torque:
20 Nm
60 Nm
130°
Stage 1:
Stage 2:
Stage 3:
24.
X = 15 mm.
25.
26.
27. Apply a thin coating.
Material:
Engine Oil - 5W-30 (WSS-M2C913-C)
28. Material:
Flange Sealant - Anaerobic LP (WSK-M2G348
5U7J-M2G348-BA)
29. Torque:
30. Special Tool(s):
303-318
31.
NOTE: The crankshaft timing pulley can only be installed in 1
position on the crankshaft splines.
Torque:
17 Nm
32.
NOTE: Only tighten the bolts finger tight at this stage.
33.
1. Torque: 25 Nm
2. Torque: 12 Nm
34.
NOTE: Install all the bolts finger tight before final tightening.
1. Torque:
35 Nm
75°
2. Torque:
15 Nm
90°
Stage 1:
Stage 2:
Stage 1:
Stage 2:
35. Install the Special Tool(s):
303-1178
Torque:
10 Nm
36.
37.
CAUTION: Only rotate the crankshaft clockwise.
Rotate the crankshaft slowly until the crankshaft stops.
Install the Special Tool(s):
303-1182
38.
CAUTION: Make sure that the installation marks are
aligned.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст