Ford Galaxy / Ford S-MAX. Manual — part 212

applying the
sealant.

Material:

Sealant -
LP (WSK
A7 / 5U7J
BA)

6.

CAUTION:

Make sure that new
bolts are installed.

Torque:

7. Torque:

M8: 13

8. Torque:

M7: 25

9. Torque:

M10: 1

Stage 1:

Stage 2:

10.

NOTE: This step is
only necessary
when installing a
new component.

11.

CAUTION: Make sure that the components are installed

to the position noted before removal.

General Equipment:

Piston ring compressor

12.

CAUTION: Make sure that the components are installed

to the position noted before removal.

Apply a thin coating.

Material:

Engine Oil - 5W-30 (WSS-M2C913-C)

13.

CAUTIONS:

Make sure that

the components
are installed to the
position noted
before removal.

Make sure that

new bolts are
installed.

Apply a thin coating.

Material:

5W-30 (WSS
M2C913-

Torque:

Nm

Stage 1:

Stage 2:

14. Torque: 10 Nm

15.

NOTE: The component
must be installed within 5
minutes of applying the
sealant.

Material:

Flange Sealant

Anaerobic LP (WSK
M2G348-A7 / 5U7J
M2G348-BA)

16.

NOTE: Only tighten the bolts finger tight at this stage.

17. General Equipment:

Round-ended steel rule

18. Torque: 17 Nm

19. Torque: 17 Nm

20. Torque: 6 Nm

21. Special Tool(s):

303-1180

22. Special Tool(s):

303-1181