Ford Galaxy / Ford S-MAX. Manual — part 532
6.
NOTE: Overheating can cause loss of surface
hardness.
Check for a dark blue colors caused by
overheating (yellow or brown is normal)
due to excessive pre-load or inadequate
lubrication.
Install a new bearing, new seals and check
other components as necessary.
7.
Check the surfaces for abrasion due to
metal fatigue.
Install a new bearing and clean all other
affected components as necessary.
Manual Transmission/Transaxle - Vehicles
With: 6-Speed Manual Transaxle - MMT6 -
Transmission Draining and Filling
S-MAX/Galaxy 2006.5 (02/2006-)
General Procedures
Materials
Name
Specification
Transmission Oil 75W FE WSS-M2C200-D2 / 7U7J-M2C200-BA
1. Refer to: Allgemeine Informationen zur Service
Literatur (100-00, Description and Operation).
2.
3. Material:
Transmission Oil 75W FE (WSS-
M2C200-D2 / 7U7J-M2C200-BA)
Torque:
35 Nm
4. Torque: 35 Nm
Manual Transmission/Transaxle - Vehicles
With: 6-Speed Manual Transaxle - MMT6 -
Halfshaft Seal LH
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
Removal
Installation
205-115
Installer, Drive Pinion Seal
308-208
Remover, Halfshaft Seal
1. Remove the left-hand front driveshaft.
Refer to:
Front Halfshaft LH
(205-04 Front Drive
Halfshafts, Removal and Installation).
2. Special Tool(s):
308-208
1. Special Tool(s):
205-115
2. Install the left-hand front driveshaft.
Refer to:
Front Halfshaft LH
(205-04 Front Drive
Halfshafts, Removal and Installation).
3. Check the level of the transmission fluid.
Refer to:
Transmission Draining and Filling
(308-
03A Manual Transmission/Transaxle - Vehicles
With: 5-Speed Manual Transaxle - MTX75,
General Procedures).
Refer to:
Transmission Draining and Filling
(308-
03B Manual Transmission/Transaxle - Vehicles
With: 6-Speed Manual Transaxle - MMT6,
General Procedures).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст