Ford Galaxy / Ford S-MAX. Manual — part 463
Electronic Engine Controls - 2.3L Duratec-
HE (118kW/160PS) - MI4 - Engine
Coolant Temperature (ECT) Sensor
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Vehicles built up to 11/2007
Vehicles built 11/2007 onwards
1. Refer to:
Engine Cooling System Health and
Safety Precautions
(100-00 General Information,
Description and Operation).
2.
3.
WARNING: When releasing the cooling
system pressure, cover the coolant
expansion tank cap with a thick cloth.
Loosen:
1 turn(s)
4. Close the coolant expansion tank cap.
5.
6.
WARNING: Be prepared to collect
escaping fluid.
Torque:
12 Nm
Installation
7.
WARNING: Be prepared to collect
escaping fluid.
NOTE: The O-ring seal is to be reused unless
damaged.
1. To install, reverse the removal procedure.
2. Refer to:
Cooling System Draining, Filling and
Bleeding
(303-03A Engine Cooling - 2.0L
Duratec-HE (107kW/145PS) - MI4/2.0L Duratec-
HE Flex Fuel (107kW/145PS) - MI4/2.3L Duratec-
HE (118kW/160PS) - MI4, General Procedures).
Electronic Engine Controls - 2.3L Duratec-HE
(118kW/160PS) - MI4 - Clutch Pedal Position
(CPP) Switch
S-MAX/Galaxy 2006.5 (02/2006
Removal and Installation
Removal
Installation
1.
CAUTION:
Make sure
that the clutch
pedal remains
in the rest
position.
1.
CAUTION: Make sure that the clutch pedal remains
in the rest position.
To install, reverse the removal procedure.
Electronic Engine Controls - 2.3L Duratec-
HE (118kW/160PS) - MI4 - Clutch Pedal
Position (CPP) Sensor
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
Removal
NOTE: Removal steps in this procedure may contain installation details.
Left-hand drive vehicles
All vehicles
308-651
Installer, Clutch Master Cylinder Sensor
1. Refer to:
Battery
(414-01 Battery, Mounting and
Cables, Removal and Installation).
2.
3.
4. Remove the Special Tool(s):
308-651
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст