Ford Galaxy / Ford S-MAX. Manual — part 462
Electronic Engine Controls - 2.3L Duratec-
HE (118kW/160PS) - MI4 - Intake
Manifold Runner Control (IMRC) Actuator
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1.
2. Remove the air cleaner.
Refer to:
Air Cleaner
(303-12A Intake Air
Distribution and Filtering - 2.0L Duratec-HE
(107kW/145PS) - MI4/2.0L Duratec-HE Flex Fuel
(107kW/145PS) - MI4/2.3L Duratec-HE
(118kW/160PS) - MI4, Removal and
Installation).
3. Torque: 2 Nm
1. To install, reverse the removal procedure.
Electronic Engine Controls - 2.3L Duratec-
HE (118kW/160PS) - MI4 - Intake
Manifold Tuning (IMT) Valve
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1. Refer to: Throttle Body - 2.0L Duratec-HE (MI4)
(303-04 Fuel Charging and Controls - 2.0L
Duratec-HE (MI4)/2.3L Duratec-HE (MI4),
Removal and Installation).
Refer to: Throttle Body - 2.3L Duratec-HE (MI4)
(303-04, Removal and Installation).
2. Disconnect the actuator arm from the intake
manifold tuning (IMT) valve.
Torque:
2 Nm
1. To install, reverse the removal procedure.
Electronic Engine Controls - 2.3L Duratec-
HE (118kW/160PS) - MI4 - Crankshaft
Position (CKP) Sensor
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
Removal
Installation
303-1390
Alignment Tool, Crankshaft Position Sensor
1.
1.
CAUTION: Only rotate the
crankshaft clockwise.
NOTE: Make sure that the installation
marks are aligned.
2. Bolt M6x18 mm
1. Special Tool(s):
303-1390
Torque:
7 Nm
2.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст