Ford Galaxy / Ford S-MAX. Manual — part 79
Parking Brake and Actuation - Parking
Brake Release Actuator
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1. Torque: 9 Nm
1. To install, reverse the removal procedure.
Hydraulic Brake Actuation - Hydraulic
Brake Actuation
S-MAX/Galaxy 2006.5 (02/2006-)
Description and Operation
Description
Rear brake hoses
Brake tubes
Front brake hose - LH
Brake master cylinder
Brake fluid reservoir extension
Front brake hose - RH
Brake fluid reservoir
Hydraulic control unit (HCU) - see section 206-09A
Item
1
2
3
4
5
6
7
8
Part Number
-
-
-
-
-
-
-
-
Hydraulic Brake Actuation - Hydraulic
Brake Actuation
S-MAX/Galaxy 2006.5 (02/2006-)
Diagnosis and Testing
REFER to Section
206-00 Brake System - General Information
.
Hydraulic Brake Actuation - Brake Master
Cylinder—LHD FWD
S-MAX/Galaxy 2006.5 (02/2006
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to:
Brake System Health and Safety Precautions
(100-00 General Information, Description and
Operation).
2.
3.
1. Connect one end of a suitable piece of clear
plastic pipe to the brake caliper bleed nipple and
place the other end into a suitable container.
2. Loosen the bleed nipple.
3. Depress the brake pedal until all the brake fluid is
drained from the brake fluid reservoir.
4. Tighten the bleed nipple.
5. Repeat the draining procedure on the opposite
side brake caliper.
4.
3. Detach
the A
pillar
exterior
trim
lower
retaining
clips.
5.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст