Ford Galaxy / Ford S-MAX. Manual — part 44
6. Torque: 2.8 Nm
7. Torque:
20 Nm
8. Torque: 110 Nm
9. Torque: 110 Nm
10.
NOTE: This step is only necessary when
installing a new component to the left-hand
side.
Torque:
10 Nm
11.
NOTE: This step is only necessary when
installing a new component to the right-hand
side.
Torque:
10 Nm
12. Refer to:
Spring
(204-02 Rear Suspension,
Removal and Installation).
13. Refer to:
Rear Toe Adjustment
(204-00
Suspension System - General Information,
General Procedures).
Rear Suspension - Rear Wheel Bearing
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1. Remove the brake caliper.
Refer to:
Brake Caliper
(206-04 Rear Disc Brake,
Removal and Installation).
2.
3.
1. Torque: 5 Nm
2. Torque: 110 Nm
1. To install, reverse the removal procedure.
Rear Suspension - Upper Arm
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
General Equipment
Removal
Transmission jack
1. Remove the spring.
Refer to:
Spring
(204-02 Rear Suspension,
Removal and Installation).
2. Fabricate a spacer.
3. General Equipment:
Transmission jack
4. Install the spacer. Make sure that the spacer is
in a vertical plane and raise the suspension to
the design height setting.
5.
6.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст