Ford Galaxy / Ford S-MAX. Manual — part 45
Installation
1. Torque: 130 Nm
2. Torque: 130 Nm
3. Install the spring.
Refer to:
Spring
(204-02 Rear Suspension,
Removal and Installation).
4. Check the toe setting and adjust as necessary.
Refer to:
Rear Toe Adjustment
(204-00
Suspension System - General Information,
General Procedures).
Refer to:
Specifications
(204-00 Suspension
System - General Information, Specifications).
Rear Suspension - Front Lower Arm
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
General Equipment
Removal
Installation
Transmission jack
1. Remove the spring.
Refer to:
Spring
(204-02 Rear Suspension,
Removal and Installation).
2. Fabricate a spacer.
3. General Equipment:
Transmission jack
4. Install the spacer. Make sure that the spacer is
in a vertical plane and raise the suspension to
the design height setting.
5.
1. Torque: 130 Nm
2. Install the spring.
Refer to:
Spring
(204-02 Rear Suspension,
Removal and Installation).
3. Check the toe setting and adjust as necessary.
Refer to:
Rear Toe Adjustment
(204-00
Suspension System - General Information,
General Procedures).
Rear Suspension - Rear Lower Arm
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
General Equipment
Removal
Installation
Transmission jack
1. Remove the spring.
Refer to:
Spring
(204-02 Rear Suspension,
Removal and Installation).
2. Fabricate a spacer.
3. General Equipment:
Transmission jack
4. Install the spacer. Make sure that the spacer is
in a vertical plane and raise the suspension to
the design height setting.
5.
1.
NOTE: Only tighten the nut and bolts finger
tight at this stage.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст