Ford Galaxy / Ford S-MAX. Manual — part 1097
Vehicles with 2.0L or diesel engine
All vehicles
18. Torque: 80 Nm
19. General Equipment:
Transmission jack
20.
1. Torque: 30 Nm
2.
CAUTION: Make sure that new
bolts are installed.
Torque:
150 Nm
90°
Stage 1:
Stage 2:
21.
WARNING: This step requires the aid of
another technician.
CAUTIONS:
Make sure that no components catch
when lowering the subframe.
Make sure that new bolts are installed.
Lower the front subframe to gain access to the
front subframe rear bushings.
Torque:
150 Nm
Stage 1:
Installation
90°
Stage 2:
22.
NOTE: Note the position of the component
before removal.
Special Tool(s):
204-598
1.
NOTE: Make sure that this component is
installed to the noted removal position.
Special Tool(s):
204-598
,
204-598-01
2. Install the Front Subframe.
Refer to:
Front Subframe
(502-00 Uni-Body,
Subframe and Mounting System, Removal and
Installation).
Uni-Body, Subframe and Mounting System
- Rear Subframe
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
General Equipment
Removal
205-316A
Alignment Pins, Subframe
Transmission jack
1. Remove the following items:
1. Remove the stabilizer bar link, on both
sides.
Refer to:
Rear Stabilizer Bar Link
(204-02
Rear Suspension, Removal and
Installation).
2. Remove the spring, on both sides.
Refer to:
Spring
(204-02 Rear Suspension,
Removal and Installation).
2.
3. Fabricate two spacers.
4. General Equipment:
Transmission jack
5. Install the spacer. Make sure that the spacer is
in a vertical plane and raise the suspension to
the design height setting on both sides.
6.
NOTE: Note the position of each component
before removal.
7. On both sides.
8. On both sides.
9.
10. Support the rear subframe and remove the rear
subframe bolts.
General Equipment:
Transmission jack
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст