Ford Galaxy / Ford S-MAX. Manual — part 368
Engine cuts out during hard
acceleration
CMP sensor.
*
Carry out a full engine diagnosis
using the guided diagnostic menu in
the Ford approved diagnostic tool.
*
CKP sensor.
*
Carry out a full engine diagnosis
using the guided diagnostic menu in
the Ford approved diagnostic tool.
*
FRP sensor.
*
Carry out a full engine diagnosis
using the guided diagnostic menu in
the Ford approved diagnostic tool.
*
Low fuel system
pressure.
*
Check the fuel system pressure.
REFER to:
Fuel System Pressure
Check - 2.5L Duratec (162kW/220PS)
- VI5
(310-00 Fuel System - General
Information, General Procedures).
*
Fuel Charging and Controls - 2.5L Duratec
(162kW/220PS) - VI5 - Fuel Injectors
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Materials
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
Name
Specification
Engine Oil - 5W-30 WSS-M2C911-A
1. Refer to:
Fuel Rail
(303-04C Fuel Charging and
Controls - 2.5L Duratec (162kW/220PS) - VI5,
Removal and Installation).
2.
1. Torque: 10 Nm
4. Material:
Engine Oil - 5W-30 (WSS-
M2C911-A)
1. To install, reverse the removal procedure.
Fuel Charging and Controls - 2.5L Duratec
(162kW/220PS) - VI5 - Fuel Rail
S-MAX/Galaxy 2006.5 (02/2006
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to:
Petrol and Petrol-Ethanol Fuel Systems
Health and Safety Precautions
(100-00 General
Information, Description and Operation).
2. Refer to:
Fuel System Pressure Release
(310-00 Fuel
System - General Information, General Procedures).
3. Refer to:
Battery Disconnect and Connect
(414-01
Battery, Mounting and Cables, General Procedures).
4. Refer to:
Air Cleaner
(303-12C Intake Air
Distribution and Filtering - 2.5L Duratec
(162kW/220PS) - VI5, Removal and Installation).
5. Torque: 10 Nm
6.
CAUTION: Make sure that the inside of the
pipe ends are clean and free of oil residue.
Torque:
4 Nm
7.
CAUTION: Make sure that the inside of the
pipe ends are clean and free of oil residue.
8.
CAUTION: Make sure that the inside of the
pipe ends are clean and free of oil residue.
Installation
9. Torque: 10 Nm
10.
1. Torque:
2 Nm
4. Torque:
10 Nm
1. To install, reverse the removal procedure.
2. Refer to:
Door Window Motor Initialization
(501-11
Glass, Frames and Mechanisms, General
Procedures).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст