Ford Galaxy / Ford S-MAX. Manual — part 361
Fuel Charging and Controls - 2.0L
Duratec-HE (107kW/145PS) - MI4/2.0L
Duratec-HE Flex Fuel (107kW/145PS) -
MI4/2.3L Duratec-HE (118kW/160PS) -
MI4 - Fuel Rail—2.3L Duratec-HE
(118kW/160PS) - MI4
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Materials
Removal
NOTE: Removal steps in this procedure may contain installation details.
Name
Specification
Engine Oil - 5W-30 WSS-M2C913-C
1. Refer to:
Fuel System Pressure Release
(310-00
Fuel System - General Information, General
Procedures).
2.
3. Refer to:
Quick Release Coupling
(310-00 Fuel
System - General Information, General
Procedures).
Torque:
10 Nm
4. Torque: 25 Nm
Installation
5.
1.
NOTE: Make sure that new components
are installed.
6.
CAUTION: Only use the specified
material to lubricate the seals.
NOTE: Make sure that new components are
installed.
Material:
Engine Oil - 5W-30 (WSS-M2C913-C)
1. To install, reverse the removal procedure.
Fuel Charging and Controls - 2.0L
Duratec-HE (107kW/145PS) - MI4/2.0L
Duratec-HE Flex Fuel (107kW/145PS) -
MI4/2.3L Duratec-HE (118kW/160PS) -
MI4 - Throttle Body—2.0L Duratec-HE
(107kW/145PS) - MI4/2.0L Duratec-HE
Flex Fuel (107kW/145PS) - MI4
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1.
2.
3.
NOTE: The gasket is to be reused unless
damaged.
Torque:
10 Nm
1. To install, reverse the removal procedure.
2.
NOTE: Make sure that the pedals remain in
the rest position during the initialization.
Turn the ignition key to position II and wait for
one minute to initialize the throttle body.
3. Turn the ignition key to the OFF position.
Fuel Charging and Controls - 2.0L
Duratec-HE (107kW/145PS) - MI4/2.0L
Duratec-HE Flex Fuel (107kW/145PS) -
MI4/2.3L Duratec-HE (118kW/160PS) -
MI4 - Throttle Body—2.3L Duratec-HE
(118kW/160PS) - MI4
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1.
2.
3.
NOTE: The gasket is to be reused unless
damaged.
Torque:
10 Nm
1. To install, reverse the removal procedure.
2.
NOTE: Make sure that the pedals remain in
the rest position during the initialization.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст