Ford Galaxy / Ford S-MAX. Manual — part 590
Vehicles with diesel particulate filter
Installation
Vehicles with diesel particulate filter
All vehicles
12.
1. Torque: 30 Nm
2. Torque: 24 Nm
3.
NOTE: Only tighten the nuts finger tight at
this stage.
4. Torque: 24 Nm
5.
NOTE: Only tighten the nuts finger tight at
this stage.
Coat the studs with grease.
Material:
Grease KS-PS (SA-M1C9107-A / YS5J-
M1C9107-AA)
6.
NOTE: Make sure that a new clamp is
installed.
NOTE: Make sure that the clamp is installed
to the same orientation as when removed.
Torque:
24 Nm
7.
NOTE: Make sure that the exhaust flexible
pipe is not twisted.
Torque:
48 Nm
8. Torque: 24 Nm
9. Torque: 60 Nm
Vehicles with diesel particulate filter
10.
CAUTION: Make sure that the exhaust
flexible pipe is not forcibly bent.
11.
12. Lower the vehicle.
13.
14. Refer to:
Air Cleaner
(303-12D Intake Air
Distribution and Filtering - 1.8L Duratorq-TDCi
(74kW/100PS) - Lynx/1.8L Duratorq-TDCi
(92kW/125PS) - Lynx, Removal and Installation).
15.
Exhaust System - 2.0L Duratorq-TDCi
(85kW/115PS) - DW/2.0L Duratorq-TDCi
(100kW/136PS) - DW/2.0L Duratorq-
TDCi (103kW/140PS) - DW, Emission
Requirements: Stage IV - Diesel
Particulate Filter (DPF)
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Materials
General Equipment
Removal
NOTE: Removal steps in this procedure may contain installation details.
Name
Specification
Grease KS-PS SA-M1C9107-A / YS5J-M1C9107-AA
Ford diagnostic equipment
1. Raise and support the vehicle.
Refer to:
Lifting
(100-02 Jacking and Lifting,
Description and Operation).
2.
CAUTION: Make sure that the exhaust
flexible pipe is not forcibly bent.
3.
4.
5.
CAUTION: Make sure that the exhaust
flexible pipe is not forcibly bent.
Coat the studs with grease.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст