Ford Galaxy / Ford S-MAX. Manual — part 171
Installation
7. Torque: 15 Nm
8. Torque: 25 Nm
9.
1. Torque: 25 Nm
2. Torque: 20 Nm
10.
1. To install reverse the removal procedure.
2.
Apply sealant to the engine front cover
(bead diameter: 3 mm).
Material:
Silicone Sealant LB (WSE-
M4G323-A4 / 2U7J-M4G323-AA)
3. Torque:
1-8 10 Nm
9 48 Nm
10-19 10 Nm
20-22 48 Nm
4.
1. Torque: 80 Nm
2.
NOTE: Only tighten the bolts finger
tight at this stage.
3. Remove the trolley jack.
5. Torque: 90 Nm
Engine - 2.3L Duratec-HE (118kW/160PS)
- MI4 - Timing Chain
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
General Equipment
Removal
100-010
Remover, O-Ring Seal
303-376B
Alignment Plate, Camshaft
2 mm punch
1. Refer to:
Engine Front Cover
(303-01C Engine -
2.3L Duratec-HE (118kW/160PS) - MI4, Removal
and Installation).
2.
2. Special Tool(s):
100-010
3. General Equipment:
2 mm punch
3.
CAUTION: Counterhold the camshaft at
the hexagon with a wrench to prevent the
camshaft from rotating.
4.
5.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст