Ford Galaxy / Ford S-MAX. Manual — part 958
Vehicles with VIN plate body code: M
Vehicles with VIN plate body code: S
8.
9.
10. On both sides.
General Equipment:
Knife
11. On both sides.
Installation
Vehicles with VIN plate body code: M
Vehicles with VIN plate body code: S
All vehicles
1.
NOTE: Cutlines
may already exist
on the inner
surface of a new
bumper cover.
On both sides.
General Equipment:
Round-ended steel
rule
General Equipment:
15 mm drill bit
2.
NOTE: Cutlines
may already exist
on the inner
surface of a new
bumper cover.
NOTE: Make sure
that the measuring
tape has contact
to the inner
surface of the
bumper cover
while measuring.
On both sides.
General Equipment:
Round-ended steel
rule
General Equipment:
15 mm drill bit
3.
1. Align the
flattened
side
horizontal
upwards,
before
punching
each
hole.
Special
Tool(s):
501
4.
NOTE: Make sure
that the correct
parking aid sensor
housing is used as
a template to
mark the position
of the location
grooves.
General Equipment:
Flat file
5.
NOTE: Make sure
that the correct
parking aid sensor
housing is used as
a template to
mark the position
of the location
grooves.
General Equipment:
Flat file
6.
NOTE: Make sure
that the correct
parking aid sensor
housing is used as
a template to
mark the position
of the location
grooves.
General Equipment:
Flat file
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст