Ford Galaxy / Ford S-MAX. Manual — part 991
Installation
the back of the air bag module.
6.
1.
2.
CAUTION: Make sure that equal pressure
is applied to the full length of the component.
3.
CAUTION: Make sure that equal pressure
is applied to the full length of the component.
4. Torque: 8 Nm
Supplemental Restraint System -
Passenger Air Bag Module
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
WARNINGS:
The supplemental restraint system (SRS) is active for a certain length of time after
the power supply has been disconnected. Wait for a minimum of 3 minutes before
disconnecting or removing any SRS components.
Make sure that the vehicle electrical system is fully depowered and no other power
source is connected.
Wear safety goggles.
Refer to: Supplemental Restraint System (SRS) Health and Safety Precautions (100-
00 General Information, Description and Operation).
NOTE: Removal steps in this procedure may contain installation details.
Vehicles with air conditioning
1. Disconnect the battery ground cable.
Refer to:
Battery Disconnect and Connect
(414-
01 Battery, Mounting and Cables, General
Procedures).
2. Remove the navigation system digital versatile
disc (DVD) unit, if equipped.
Refer to: Navigation System Digital Versatile Disc
(DVD) Unit (415-01 Information and
Entertainment System, Removal and
Installation).
3.
4.
5.
All vehicles
Installation
6.
7.
8.
9.
1. Torque: 8 Nm
2. Torque: 8 Nm
3. Torque: 10 Nm
1. To install, reverse the removal procedure.
2. Initialize the door window motors.
Refer to: Door Window Motor Initialization (501-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст