Ford Galaxy / Ford S-MAX. Manual — part 468
Electronic Engine Controls - 2.5L Duratec
(162kW/220PS) - VI5 - Knock Sensor
(KS)
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1. Refer to:
Air Cleaner
(303-12C Intake Air
Distribution and Filtering - 2.5L Duratec
(162kW/220PS) - VI5, Removal and Installation).
2.
NOTE: Make sure that the sensor is installed
in the same location as when removed.
Torque:
20 Nm
1. To install, reverse the removal procedure.
Electronic Engine Controls - 2.5L Duratec
(162kW/220PS) - VI5 - Variable Valve
Timing (VVT) Oil Control Solenoid
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1. Torque: 10 Nm
2. Torque: 10 Nm
1. To install, reverse the removal procedure.
Electronic Engine Controls - 2.5L Duratec
(162kW/220PS) - VI5 - Powertrain Control
Module (PCM)
S-MAX/Galaxy 2006.5 (02/2006
Removal and Installation
General Equipment
Removal
NOTE: Removal steps in this procedure may contain installation details.
Vehicles without PCM security shield
3.5 mm drill bit
Center punch
Ford diagnostic equipment
1.
NOTE: This step is only necessary when installing a
new component.
Download the PCM and throttle body configuration
information into the diagnostic tool, using the
Programmable Modules Installation routine.
General Equipment:
Ford diagnostic equipment
2. Refer to: Battery Disconnect and Connect (414-01
Battery, Mounting and Cables, General Procedures).
3.
4.
5.
6.
Vehicles with PCM security shield
Installation
7. Torque: 7 Nm
8. Refer to: Air Cleaner (303-12 Intake Air Distribution and
Filtering - 2.5L Duratec-ST (VI5), Removal and
Installation).
9.
1. General
Equipment:
Center
punch
2. General
Equipment:
3.5 mm
drill bit
10.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст