Ford Galaxy / Ford S-MAX. Manual — part 467
Electronic Engine Controls - 2.5L Duratec
(162kW/220PS) - VI5 - Crankshaft
Position (CKP) Sensor
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to:
Lifting
(100-02 Jacking and Lifting,
Description and Operation).
2.
3. Turn the engine to top dead center (TDC).
4. Refer to:
Air Cleaner
(303-12C Intake Air
Distribution and Filtering - 2.5L Duratec
(162kW/220PS) - VI5, Removal and Installation).
5.
CAUTION: Make sure that the inside of
the pipe ends are clean and free of oil
residue.
6.
CAUTION: Make sure that the inside of
the pipe ends are clean and free of oil
residue.
1. Torque: 10 Nm
2. Torque: 4 Nm
3. Torque: 10 Nm
7. Torque: 10 Nm
Installation
1.
NOTE: Make sure that the sensor housing is
clean and free of foreign material.
To install, reverse the removal procedure.
Electronic Engine Controls - 2.5L Duratec
(162kW/220PS) - VI5 - Heated Oxygen
Sensor (HO2S)
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1.
CAUTION: Make sure that the inside of
the pipe ends are clean and free of oil
residue.
2.
3. Refer to:
Lifting
(100-02 Jacking and Lifting,
Description and Operation).
4.
5. Torque: 45 Nm
1. To install, reverse the removal procedure.
Electronic Engine Controls - 2.5L Duratec
(162kW/220PS) - VI5 - Catalyst Monitor
Sensor
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1. Raise and support the vehicle.
Refer to:
Lifting
(100-02 Jacking and Lifting,
Description and Operation).
2.
3. Torque: 47 Nm
1. To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст