Ford Galaxy / Ford S-MAX. Manual — part 36
9.
10. If equipped. On both sides.
11.
CAUTION: Make sure that the ball joint ball does
not rotate.
On both sides.
12.
CAUTION: Make sure that the exhaust flexible
pipe is not forcibly bent.
13.
14.
15. General Equipment:
Transmission jack
16.
Installation
17.
WARNING: This step requires the aid of another
technician.
Lower the front subframe to gain access to the stabilizer
bar bolts.
18.
19.
NOTE: Note the position of each component before
removal.
1.
NOTE: Make sure that the component is installed to
the position noted before removal.
On both sides.
2.
NOTE: Make
sure that the
clamp is
installed to
the same
orientation
as when
removed.
NOTE: Apply
water to the
stabilizer bar
clamp to
assist
installation.
General
Equipment:
Hydraulic press
3. Torque:
140 Nm
45°
Stage 1:
Stage 2:
4. On both sides.
Special Tool(s):
205-316A
5. Torque:
150 Nm
90°
Stage 1:
Stage 2:
6.
1. Torque: 30 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст