Ford Galaxy / Ford S-MAX. Manual — part 1031
Body Repairs - Vehicle Specific
Information and Tolerance Checks -
Underbody Tolerance Check
S-MAX/Galaxy 2006.5 (02/2006-)
General Procedures
1. Frame dimensions, S-MAX (quick measurements
using the Allvis system)
All dimensions are measured from the
middle of the hole or bolt head or from the
edge of the panel, using the Allvis system,
with component assemblies installed.
A tolerance of ± 3 mm applies to all
measurements given. All detailed
illustrations correspond to the left-hand
side of the vehicle.
Measuring point 4 is used as the zero point
for additional diagonal measurements.
Allvis specifications
Point of
measurement
adapter
Height setting
of the test
probes
1
25 mm
(probe)
330 mm
2
25 mm
(probe)
190 mm
3
25 mm
(probe)
50 mm
4
5
35 mm
(probe)
160 mm
6
25 mm
(probe)
170 mm
7
25 mm
(probe)
270 mm
8
25 mm
(probe)
350 mm
9
25 mm
(probe)
350 mm
2. Frame dimensions, Galaxy (quick measurements
using the Allvis system)
All dimensions are measured from the
middle of the hole or bolt head or from the
edge of the panel, using the Allvis system,
with component assemblies installed.
A tolerance of ± 3 mm applies to all
measurements given. All detailed
illustrations correspond to the left-hand
side of the vehicle.
Measuring point 4 is used as the zero point
for additional diagonal measurements.
Allvis specifications
Point of
measurement
adapter
Height setting
of the test
probes
1
25 mm
(probe)
330 mm
2
25 mm
(probe)
190 mm
3
25 mm
(probe)
50 mm
4
5
35 mm
(probe)
160 mm
6
25 mm
(probe)
170 mm
7
25 mm
(probe)
260 mm
8
25 mm
(probe)
350 mm
9
25 mm
(probe)
350 mm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст