Ford Galaxy / Ford S-MAX. Manual — part 692
Auxiliary Climate Control - Auxiliary
Evaporator Temperature Sensor
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
Installation
1. Remove the luggage compartment trim on the
left and right-hand sides.
Refer to:
Loadspace Trim Panel - VIN Plate Body
Style Code: M
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
2.
3.
1. To install, reverse the removal procedure.
Auxiliary Climate Control - Auxiliary Air
Discharge Temperature Sensor
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
Installation
1. Remove the luggage compartment trim on the
left and right-hand sides.
Refer to:
Loadspace Trim Panel - VIN Plate Body
Style Code: M
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
2.
3.
1. To install, reverse the removal procedure.
Auxiliary Climate Control - Auxiliary
Evaporator Front Outlet and Inlet Line
S-MAX/Galaxy 2006.5 (02/2006
Removal and Installation
Materials
Removal
NOTE: Removal steps in this procedure may contain installation details.
Vehicles with diesel engine
All vehicles
Name
Specification
Compressor Oil - Air Conditioning WSH-M1C231-B / 6U7J-M1C231-AA
1. Carry out the air conditioning (A/C) system recovery
procedure.
Refer to:
Air Conditioning (A/C) System Recovery,
Evacuation and Charging
(412-00 Climate Control System
- General Information, General Procedures).
2. Raise the vehicle.
Refer to:
Lifting
(100-02 Jacking and Lifting, Description
and Operation).
3.
4.
5.
CAUTION:
Make sure
that all
openings are
sealed.
1. Torque:
Nm
2. Torque:
Nm
Installation
1. Coat the O-rings on the refrigerant lines.
Material:
Compressor Oil - Air Conditioning (WSH-
M1C231-B / 6U7J-M1C231-AA)
2. To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст