Ford Galaxy / Ford S-MAX. Manual — part 343
Equipment:
Flat file
2. General
Equipment:
5 mm drill
bit
7.
8. Torque: 25 Nm
9. Torque: 8 Nm
10. Lower the vehicle.
11. Remove the cable ties securing the radiator and condenser
assembly.
12. On both sides.
Engine Cooling - 1.8L Duratorq-TDCi
(74kW/100PS) - Lynx/1.8L Duratorq-
TDCi (92kW/125PS) - Lynx - Thermostat
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1.
2. Drain the cooling system.
Refer to:
Cooling System Draining, Filling and
Bleeding
(303-03E Engine Cooling - 2.0L
Duratorq-TDCi (85kW/115PS) - DW/2.0L
Duratorq-TDCi (100kW/136PS) - DW/2.0L
Duratorq-TDCi (103kW/140PS) - DW, General
Procedures).
3. Lower the vehicle.
4.
NOTE: The O-ring seal is to be reused unless
damaged.
Torque:
9 Nm
1. To install, reverse the removal procedure.
Engine Cooling - 1.8L Duratorq-TDCi
(74kW/100PS) - Lynx/1.8L Duratorq-
TDCi (92kW/125PS) - Lynx - Thermostat
Housing
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
General Equipment
Removal
NOTE: Removal steps in this procedure may contain installation details.
Hose clamp remover/installer
1.
2. Drain the cooling system.
Refer to:
Cooling System Draining, Filling and
Bleeding
(303-03E Engine Cooling - 2.0L
Duratorq-TDCi (85kW/115PS) - DW/2.0L
Duratorq-TDCi (100kW/136PS) - DW/2.0L
Duratorq-TDCi (103kW/140PS) - DW, General
Procedures).
3. General Equipment:
Hose clamp
remover/installer
Torque:
9 Nm
4.
NOTE: The O-ring seal is to be reused unless
damaged.
General Equipment:
Hose clamp
remover/installer
Torque:
23 Nm
5.
NOTE: The O-ring seal is to be reused unless
damaged.
Torque:
9 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст