Ford Galaxy / Ford S-MAX. Manual — part 117
Installation
11.
CAUTION: Make a note of/mark the
installed positions of the components before
removal.
12. Remove and discard the cylinder head bolts.
1. Install the components in reverse order.
2. Install new cylinder head bolts.
Torque:
5 Nm
15 Nm
45 Nm
90°
90°
Stage 1:
Stage 2:
Stage 3:
Stage 4:
Stage 5:
3.
CAUTION: Make sure that the camshafts
and camshaft bearing caps are installed in
their original locations.
Apply hypoid gear oil to the camshaft bearing
caps.
Material:
Hypoid Oil 85W-90 (SQ-M2C9002-AA /
A72SX-19K261-CA)
4. Install the camshafts approximately at valve
overlap position cylinder No. 4.
Torque:
7 Nm
16 Nm
Stage 1:
Stage 2:
Engine - 2.0L Duratec-HE (107kW/145PS)
- MI4/2.0L Duratec-HE Flex Fuel
(107kW/145PS) - MI4 - Oil Pan
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Materials
Removal
Name
Specification
Engine Oil - 5W-30 WSS-M2C913-C
Silicone Sealant LB WSE-M4G323-A4 / 2U7J-M4G323-AA
1.
NOTE: Reuse the oil seal if it is not damaged.
2.
NOTE: Reuse the oil seal if it is not damaged.
3. Loosen: 5 turn(s)
4. Loosen: 5 turn(s)
5.
Installation
6.
7.
1. Material:
Silicone Sealant LB (WSE-M4G323-A4 /
2U7J-M4G323-AA)
2. Material:
Silicone Sealant LB (WSE-M4G323-A4 /
2U7J-M4G323-AA)
3.
NOTE: Only tighten the bolts finger tight at
this stage.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст