Ford Galaxy / Ford S-MAX. Manual — part 167
Installation
1. To install reverse the removal procedure.
2.
NOTE: During initialisation the pedals must
be in the rest position.
Turn the ignition key to position II and then wait
one minute in order to initialise the throttle
valve.
3. Turn the ignition key to the OFF position.
Engine - 2.3L Duratec-HE (118kW/160PS)
- MI4 - Crankshaft Front Seal
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
Removal
Installation
303-293
Remover, Crankshaft Seal
303-509
Remover, Vibration Damper Hub
1. Refer to:
Crankshaft Pulley
(303-01C Engine -
2.3L Duratec-HE (118kW/160PS) - MI4, Removal
and Installation).
2. Special Tool(s):
303-293
3.
Discard the friction washer.
1.
CAUTION: Make sure that a new friction
washer is installed.
2. Special Tool(s):
303-509
3. Refer to:
Crankshaft Pulley
(303-01C Engine -
2.3L Duratec-HE (118kW/160PS) - MI4, Removal
and Installation).
Engine - 2.3L Duratec-HE (118kW/160PS)
- MI4 - Valve Stem Seals
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
Removal
NOTE: Removal steps in this procedure may contain installation details.
303-361-02
Adapter for 303-361A
303-361A
Compressor, Valve Spring
303-362
Installer, Valve Stem Collets
303-363
Adapter, Air Supply (Cylinder Head)
303-508
Pliers, Valve Stem Seal
1. Refer to:
Camshafts
(303-01C Engine - 2.3L
Duratec-HE (118kW/160PS) - MI4, Removal and
Installation).
2.
3. Special Tool(s):
303-363
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст