Ford Galaxy / Ford S-MAX. Manual — part 405
6.
7.
8.
9.
10. If BA level, install latest level.
Installation
Refer to:
Exhaust Manifold
(303-01G Engine -
2.2L Duratorq-TDCi (129kW/175PS) - DW,
Removal and Installation).
11.
1.
NOTE: Use a new seal.
NOTE: Only tighten the bolts finger tight at
this stage.
2. Torque: 10 Nm
3.
CAUTION: Make sure that the
component is not bent.
Do not remove the clip at this stage.
4. Torque: 26 Nm
5.
CAUTION: Make sure that the
component is not bent.
Remove the clip.
6.
NOTE: Make sure that a new component is
installed.
7. Clean the filter.
Material:
Brake Cleaner (3U7J-2C410-AA)
8.
CAUTION: Make sure that the
component is not bent.
NOTE: Make sure that a new component is
installed.
NOTE: Use new seals.
NOTE: Only tighten the bolt finger tight at
this stage.
9.
CAUTION: Make sure that the
component is not bent.
NOTE: Make sure that a new component is
installed.
NOTE: Only tighten the bolt finger tight at
this stage.
10.
CAUTION: Make sure that the
component is not bent.
Torque:
5 Nm
11.
CAUTION: Make sure that the
component is not bent.
Torque:
40 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст