Ford Galaxy / Ford S-MAX. Manual — part 153
19.
CAUTION: Use an open-ended wrench to prevent
the component from turning.
Torque:
72 Nm
20.
1.
NOTE: Install all the bolts finger tight
before final tightening.
2. Torque:
1 - 20 10 Nm
21.
1. Torque: 24 Nm
2. Torque: 47 Nm
22.
CAUTION: Make sure that a new friction washer is
installed.
23. Special Tool(s):
303-509
24. Torque: 7 Nm
25. Install the Special Tool(s):
303-748
26.
CAUTION: Only rotate the crankshaft clockwise.
Rotate the crankshaft slowly until the crankshaft stops.
Special Tool(s):
303-748
27.
28.
CAUTION: Make sure that the component
aligns with the installation mark.
Torque:
100 Nm
90°
Stage 1:
Stage 2:
29. Remove the Special Tool(s):
303-748
30. Remove the Special Tool(s):
303-1504
31.
CAUTION: Only rotate the crankshaft clockwise.
32. Install the Special Tool(s):
303-748
33. Rotate the crankshaft slowly until the crankshaft stops.
Special Tool(s):
303-748
34.
NOTE: The special tool can only be installed if the valve
timing is correct.
Install the Special Tool(s):
303-1504
35. Remove the Special Tool(s):
303-1504
36.
1. Remove the Special Tool(s):
303-748
2. Torque: 20 Nm
37. Special Tool(s):
303-499
Torque:
12 Nm
38.
NOTE: The
gasket is to
be reused
unless
damaged.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст