Ford Galaxy / Ford S-MAX. Manual — part 188
52.
53. Torque: 15 Nm
54. Torque: 15 Nm
55.
56. Refer to: Antriebsriemen - Zusatzaggregate
(303-05 Antrieb - Zusatzaggregate - 2.5L
Duratec (VI5), Removal and Installation).
57. Refer to: Kühlsystem entleeren, mit Kühlmittel
auffüllen und entlüften (303-03 Kühlsystem -
2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4),
General Procedures).
58. Refer to: Rad und Reifen (204-04 Räder und
Reifen, Removal and Installation).
59. Torque: 12 Nm
60. Refer to: Batterie (414-01 Batterie, Befestigung
und Batteriekabel, Removal and Installation).
61. Refer to: Fensterhebermotor initialisieren (501-
11 Fenster, Rahmen und
Betätigungsmechanismen, General Procedures).
62.
Engine - 2.5L Duratec (162kW/220PS) -
VI5 - Specifications
S-MAX/Galaxy 2006.5 (02/2006-)
Engine Data
Engine Oil
Engine Oil Capacity
Engine Oil Pressure
Valve Clearance
Valves
Description
Engine code
HUWA
Firing order
1-2-4-5-3
Emission level
Stage IV
Bore
83 mm
Stroke
93.2 mm
Cubic capacity
2522 cm³
Compression ratio
9 : 1
Power output at 5000 rpm
162 kW (220 PS)
Max. torque at 1500 rpm
320 Nm
Maximum engine speed (intermittent)
6800 rpm
Maximum engine speed (continous)
6500 rpm
Idle speed
800 rpm
Number of main bearings
6
Camshaft drive
Timing Belt
Maximum oil consumption
0.5 l/1000 Km
Viscosity / ambient temperature
Type
Specification
Recommended engine oil
SAE 5W-30 / below -20°C to over +40°C
Ford Formula E
WSS-M2C913-C
Alternative engine oils (for top-up only)
SAE 10W-40 / -20°C to over +40°C
Ford Formula XR+
ACEA A3/B3
SAE 5W-40 / below -20°C to over +40°C
Ford Formula S
ACEA A3/B3
Description
Liters
Service fill including filter
5.8
Service fill excluding filter
5.5
Description
Bar
Minimum oil pressure at 800 - 850 rpm (normal operating temperature)
1.0
Minimum oil pressure at 4000 rpm (normal operating temperature)
3.5
Oil pressure relief valve opening pressure
4.8
Description
mm
Valve clearance (engine cold), intake
0.17 - 0.23
Valve clearance (engine cold), exhaust
0.37 - 0.43
Description
mm
Intake valve lenght
101.93 - 102.07
Intake valve shaft diameter
5.87 - 6.01
Intake valve guide clearance
0.05 - 0.07
Exhaust valve lenght
101.43 - 101.57
Exhaust valve shaft diameter
5.87 - 6.01
Exhaust valve guide clearance
0.05 - 0.07
Valve Seats
Cylinder Head
Camshafts
Crankshaft
Crankshaft Main Bearing Selection
Description
degree
Intake valve seat angle
45.33 - 45.67
Exhaust valve seat angle
45.33 - 45.67
Description
mm
Cylinder head height
149.25 - 149.55
Maximum mating face distortion (lengthwise)
0.05
Maximum mating face distortion (crosswise)
0.02
Maximum face milling
0.30
Description
mm
Intake camshaft lobe lift
8.68
Exhaust camshaft lobe lift
9.05
Description
mm
Crankshaft axial clearance
0.08 - 0.19
Code - Cylinder block
A
B
C
Crankshaft
main bearing
for:
Cylinder
block
Crankshaft
main bearing
carrier
Cylinder
block
Crankshaft
main bearing
carrier
Cylinder
block
Crankshaft
main bearing
carrier
Code -
Crankshaft
A
yellow
medium
yellow medium
yellow
medium
blue thick
blue thick
blue thick
B
red thin yellow medium
yellow
medium
yellow medium
yellow
medium
blue thick
C
red thin
red thin
red thin yellow medium
yellow
medium
yellow medium
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст