Ford Galaxy / Ford S-MAX. Manual — part 38
Front Suspension - Front Stabilizer Bar—2.0L
EcoBoost SCTi (149kW/203PS) - MI4
S-MAX/Galaxy 2006.5 (02/2006
Removal and Installation
Special Tool(s)
General Equipment
Removal
205-316A
Alignment Pins, Subframe
Cable ties
Hydraulic press
Transmission jack
1.
2.
3. If equipped.
4.
5. If equipped. On both sides.
6.
CAUTION: Make sure that the ball joint ball
does not rotate.
On both sides.
7.
CAUTION: Make sure that the exhaust flexible
pipe is not forcibly bent.
8.
9.
10. General
Equipment:
Cable ties
11. General Equipment:
Transmission jack
12.
13.
WARNING: This step requires the aid of
another technician.
Lower the front subframe to gain access to the
stabilizer bar bolts.
Installation
14.
15.
NOTE: Note the position of each component before
removal.
1.
NOTE: Make sure that the component is installed to
the position noted before removal.
On both sides.
2.
NOTE:
Make sure
that the
clamp is
installed to
the same
orientation
as when
removed.
NOTE:
Apply
water to
the
stabilizer
bar clamp
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст