Ford Galaxy / Ford S-MAX. Manual — part 721
Installation
1. To install, reverse the removal procedure.
2.
WARNING: Take extra care when
handling the compressed spring.
Generator and Regulator - Generator—
2.5L Duratec (162kW/220PS) - VI5
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to: Battery Disconnect and Connect (414-
01 Battery, Mounting and Cables, General
Procedures).
2. Remove the following items:
1. Refer to: Throttle Body (303-04 Fuel
Charging and Controls - 2.5L Duratec-ST
(VI5), Removal and Installation).
2. Right-hand headlamp.
Refer to: Headlamp Assembly (417-01A,
Removal and Installation).
3. Refer to: Lifting (100-02, Description and
Operation).
4.
5. Refer to: Accessory Drive Belt (303-05 Accessory
Drive - 2.5L Duratec-ST (VI5), Removal and
Installation).
6.
CAUTION: Make sure that the inside of
the pipe ends are clean and free of oil
residue.
7.
8.
9.
10.
11.
Installation
12.
WARNING: Be prepared to collect
escaping fluid.
CAUTION: Make sure that all openings
are sealed. Use new blanking caps.
NOTE: The O-ring seal is to be reused unless
damaged.
Torque:
23 Nm
13. Torque: 10 Nm
14.
NOTE: Install all the bolts finger tight before
final tightening.
1. Torque: 15 Nm
2. Torque: 25 Nm
1. To install, reverse the removal procedure.
2. Refer to: Power Steering System Filling (211-00
Steering System - General Information, General
Procedures).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст