Ford Galaxy / Ford S-MAX. Manual — part 111
8.
1. Torque: 48 Nm
2. Torque: 80 Nm
9. Lower the vehicle.
10.
Torque:
10 Nm
11.
12.
13. General Equipment:
Trolley jack
Installation
14. Torque:
Bolts - front engine mounting 80 Nm
Nuts - front engine mounting 90 Nm
15.
16. General Equipment:
Hose clamp
remover/installer
Torque:
18 Nm
1. To install, reverse the removal procedure.
2.
NOTE: During initialisation the pedals must
be in the rest position.
Turn the ignition key to position II and then wait
one minute in order to initialise the throttle
valve.
3. Turn the ignition key to the OFF position.
Engine - 2.0L Duratec-HE (107kW/145PS)
- MI4/2.0L Duratec-HE Flex Fuel
(107kW/145PS) - MI4 - Crankshaft Front
Seal
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
Special Tool(s)
Removal
Installation
303-293
Remover, Crankshaft Seal
303-509
Remover, Vibration Damper Hub
1. Refer to:
Crankshaft Pulley
(303-01A Engine -
2.0L Duratec-HE (107kW/145PS) - MI4/2.0L
Duratec-HE Flex Fuel (107kW/145PS) - MI4,
Removal and Installation).
2. Special Tool(s):
303-293
3.
Discard the friction washer.
1.
CAUTION: Make sure that a new friction
washer is installed.
2. Special Tool(s):
303-509
3. Refer to:
Crankshaft Pulley
(303-01A Engine -
2.0L Duratec-HE (107kW/145PS) - MI4/2.0L
Duratec-HE Flex Fuel (107kW/145PS) - MI4,
Removal and Installation).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст