Ford Galaxy / Ford S-MAX. Manual — part 325
1. General
Equipment:
Flat file
2. General
Equipment:
5 mm drill
bit
7.
8. Torque: 25 Nm
9. Torque: 8 Nm
10. Lower the vehicle.
11. Remove the cable ties securing the radiator and condenser
assembly.
12. On both sides.
Engine Cooling - 2.0L Duratec-HE
(107kW/145PS) - MI4/2.0L Duratec-HE
Flex Fuel (107kW/145PS) - MI4/2.3L
Duratec-HE (118kW/160PS) - MI4 -
Thermostat—2.0L Duratec-HE
(107kW/145PS) - MI4/2.0L Duratec-HE
Flex Fuel (107kW/145PS) - MI4
S-MAX/Galaxy 2006.5 (02/2006-)
Removal and Installation
General Equipment
Removal
NOTE: Removal steps in this procedure may contain installation details.
Hose clamp remover/installer
1. Drain the cooling system.
Refer to:
Cooling System Draining, Filling and
Bleeding
(303-03A Engine Cooling - 2.0L
Duratec-HE (107kW/145PS) - MI4/2.0L Duratec-
HE Flex Fuel (107kW/145PS) - MI4/2.3L Duratec-
HE (118kW/160PS) - MI4, General Procedures).
2.
3. Remove the right-hand side headlamp assembly.
Refer to:
Headlamp Assembly
(417-01 Exterior
Lighting, Removal and Installation).
4. General Equipment:
Hose clamp
remover/installer
5.
NOTE: The gasket is to be reused unless
damaged.
Torque:
10 Nm
6.
Installation
1. To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст