Ford Galaxy / Ford S-MAX. Manual — part 712
Pinpoint Tests
PINPOINT TEST A : DTC B1B3612 - FRONT OUTER RIGHT PARKING AID
SENSOR SIGNAL - SHORT TO POWER
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
A1: CHECK CIRCUIT VMP13 (BU/OG) FOR SHORT TO POWER
Disconnect Front outer right parking aid sensor
C1MP13.
1
Disconnect Parking aid module C4MP01B.
2
Ignition switch in position II.
3
Measure the voltage between the parking aid module
C4MP01B pin 8, circuit VMP13A (BU/OG), harness
side and ground.
4
Is a voltage present?
Yes
REPAIR the circuit. TEST the system for normal
operation.
No
INSTALL a new front outer right parking aid sensor.
REFER to:
Front Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST B : DTC B1B3696 - FRONT OUTER RIGHT PARKING AID
SENSOR - GROUND CIRCUIT OPEN OR PARKING AID SENSOR INTERNAL
FAILURE
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
B1: CHECK CIRCUIT RMP06 (YE/OG) FOR OPEN
Disconnect Front outer right parking aid sensor
C1MP13.
1
Disconnect Parking aid module C4MP01B.
2
Measure the resistance between the parking aid
module C4MP01B pin 1, circuit RMP06A (YE/OG),
harness side and the front outer right parking aid
sensor C1MP13 pin 3, circuit RMP06C (YE/OG),
harness side.
3
Is the resistance less than 1 Ohm?
Yes
INSTALL a new front outer right parking aid sensor.
REFER to:
Front Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
No
REPAIR the circuit. TEST the system for normal
operation.
PINPOINT TEST C : DTC B1B3812 - FRONT INNER RIGHT PARKING AID
SENSOR SIGNAL - SHORT TO POWER
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
C1: CHECK CIRCUIT VMP12 (BU/GY) FOR SHORT TO POWER
Disconnect Front inner right parking aid sensor
C1MP12.
1
Disconnect Parking aid module C4MP01B.
2
Ignition switch in position II.
3
Measure the voltage between the parking aid module
C4MP01B pin 7, circuit VMP12A (BU/GY), harness
side and ground.
4
Is a voltage present?
Yes
REPAIR the circuit. TEST the system for normal
operation.
No
INSTALL a new front inner right parking aid sensor.
REFER to:
Front Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST D : DTC B1B3896 - FRONT INNER RIGHT PARKING AID
SENSOR - GROUND CIRCUIT OPEN OR PARKING AID SENSOR INTERNAL
FAILURE
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
D1: CHECK CIRCUIT RMP06 (YE/OG) FOR OPEN
Disconnect Front inner right parking aid sensor
C1MP12.
1
Disconnect Parking aid module C4MP01B.
2
Measure the resistance between the parking aid
module C4MP01B pin 1, circuit RMP06A (YE/OG),
harness side and the front inner right parking aid
sensor C1MP12 pin 3, circuit RMP06E (YE/OG),
harness side.
3
Is the resistance less than 1 Ohm?
Yes
INSTALL a new front inner right parking aid sensor.
REFER to:
Front Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
No
REPAIR the circuit. TEST the system for normal
operation.
PINPOINT TEST E : DTC B1B4012 - FRONT OUTER LEFT PARKING AID
SENSOR SIGNAL - SHORT TO POWER
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
E1: CHECK CIRCUIT VMP11 (BU/GN) FOR SHORT TO POWER
Disconnect Front outer left parking aid sensor
C1MP11.
1
Disconnect Parking aid module C4MP01B.
2
Ignition switch in position II.
3
Measure the voltage between the parking aid module
C4MP01B pin 7, circuit VMP11A (BU/GN), harness
side and ground.
4
Is a voltage present?
Yes
REPAIR the circuit. TEST the system for normal
operation.
No
INSTALL a new front outer left parking aid sensor.
REFER to:
Front Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST F : DTC B1B4096 - FRONT OUTER LEFT PARKING AID
SENSOR - GROUND CIRCUIT OPEN OR PARKING AID SENSOR INTERNAL
FAILURE
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
F1: CHECK CIRCUIT RMP06 (YE/OG) FOR OPEN
Disconnect Front outer left parking aid sensor
C1MP11.
1
Disconnect Parking aid module C4MP01B.
2
Measure the resistance between the parking aid
module C4MP01B pin 1, circuit RMP06A (YE/OG),
harness side and the front outer left parking aid
sensor C1MP11 pin 3, circuit RMP06F (YE/OG),
3
harness side.
Is the resistance less than 1 Ohm?
Yes
INSTALL a new front outer left parking aid sensor.
REFER to:
Front Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
No
REPAIR the circuit. TEST the system for normal
operation.
PINPOINT TEST G : DTC B1B4212 - FRONT INNER LEFT PARKING AID
SENSOR SIGNAL - SHORT TO POWER
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
G1: CHECK CIRCUIT VMP10 (WH/BU) FOR SHORT TO POWER
Disconnect Front inner left parking aid sensor
C1MP10.
1
Disconnect Parking aid module C4MP01B.
2
Ignition switch in position II.
3
Measure the voltage between the parking aid module
C4MP01B pin 6, circuit VMP10A (WH/BU), harness
side and ground.
4
Is a voltage present?
Yes
REPAIR the circuit. TEST the system for normal
operation.
No
INSTALL a new front inner left parking aid sensor.
REFER to:
Front Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST H : DTC B1B4296 - FRONT INNER LEFT PARKING AID
SENSOR - GROUND CIRCUIT OPEN OR PARKING AID SENSOR INTERNAL
FAILURE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст