Ford Galaxy / Ford S-MAX. Manual — part 713
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
H1: CHECK CIRCUIT RMP06 (YE/OG) FOR OPEN
Disconnect Front inner left parking aid sensor
C1MP10.
1
Disconnect Parking aid module C4MP01B.
2
Measure the resistance between the parking aid
module C4MP01B pin 1, circuit RMP06A (YE/OG),
harness side and the front inner left parking aid
sensor C1MP10 pin 3, circuit RMP06G (YE/OG),
harness side.
3
Is the resistance less than 1 Ohm?
Yes
INSTALL a new front inner left parking aid sensor.
REFER to:
Front Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
No
REPAIR the circuit. TEST the system for normal
operation.
PINPOINT TEST I : DTC B1B4412 - REAR OUTER RIGHT PARKING AID
SENSOR SIGNAL - SHORT TO POWER
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
I1: CHECK CIRCUIT VMP17 (YE/OG) FOR SHORT TO POWER
Disconnect Rear outer right parking aid sensor
C4MP17.
1
Disconnect Parking aid module C4MP01C.
2
Ignition switch in position II.
3
Measure the voltage between the parking aid module
C4MP01C pin 4, circuit VMP17A (YE/OG), harness
side and ground.
4
Is a voltage present?
Yes
REPAIR the circuit. TEST the system for normal
operation.
No
INSTALL a new rear outer right parking aid sensor.
REFER to:
Rear Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST J : DTC B1B4496 - REAR OUTER RIGHT PARKING AID
SENSOR - GROUND CIRCUIT OPEN OR PARKING AID SENSOR INTERNAL
FAILURE
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
J1: CHECK CIRCUIT RMP07 (GN/WH) FOR OPEN
Disconnect Rear outer right parking aid sensor
C4MP17.
1
Disconnect Parking aid module C4MP01C.
2
Measure the resistance between the parking aid
module C4MP01C pin 8, circuit RMP07A (GN/WH),
harness side and the rear outer right parking aid
sensor C4MP17 pin 3, circuit RMP07E (GN/WH),
harness side.
3
Is the resistance less than 1 Ohm?
Yes
INSTALL a new rear outer right parking aid sensor.
REFER to:
Rear Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
No
REPAIR the circuit. TEST the system for normal
operation.
PINPOINT TEST K : DTC B1B4612 - REAR INNER RIGHT PARKING AID
SENSOR SIGNAL - SHORT TO POWER
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
K1: CHECK CIRCUIT VMP16 (YE/GY) FOR SHORT TO POWER
Disconnect Rear inner right parking aid sensor
C4MP16.
1
Disconnect Parking aid module C4MP01C.
2
Ignition switch in position II.
3
Measure the voltage between the parking aid module
C4MP01C pin 2, circuit VMP16A (YE/GY), harness
side and ground.
4
Is a voltage present?
Yes
REPAIR the circuit. TEST the system for normal
operation.
No
INSTALL a new rear inner right parking aid sensor.
REFER to:
Rear Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST L : DTC B1B4696 - REAR INNER RIGHT PARKING AID
SENSOR - GROUND CIRCUIT OPEN OR PARKING AID SENSOR INTERNAL
FAILURE
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
L1: CHECK CIRCUIT RMP07 (GN/WH) FOR OPEN
Disconnect Rear inner right parking aid sensor
C4MP16.
1
Disconnect Parking aid module C4MP01C.
2
Measure the resistance between the parking aid
module C4MP01C pin 8, circuit RMP07A (GN/WH),
harness side and the rear inner right parking aid
sensor C4MP16 pin 3, circuit RMP07D (GN/WH),
harness side.
3
Is the resistance less than 1 Ohm?
Yes
INSTALL a new rear inner right parking aid sensor.
REFER to:
Rear Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
No
REPAIR the circuit. TEST the system for normal
operation.
PINPOINT TEST M : DTC B1B4812 - REAR OUTER LEFT PARKING AID
SENSOR SIGNAL - SHORT TO POWER
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
M1: CHECK CIRCUIT VMP15 (YE/GN) FOR SHORT TO POWER
Disconnect Rear outer left parking aid sensor
C4MP15.
1
Disconnect Parking aid module C4MP01C.
2
Ignition switch in position II.
3
Measure the voltage between the parking aid module
C4MP01C pin 5, circuit VMP15A (YE/GN), harness
side and ground.
4
Is a voltage present?
Yes
REPAIR the circuit. TEST the system for normal
operation.
No
INSTALL a new rear outer left parking aid sensor.
REFER to:
Rear Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
PINPOINT TEST N : DTC B1B4896 - REAR OUTER LEFT PARKING AID
SENSOR - GROUND CIRCUIT OPEN OR PARKING AID SENSOR INTERNAL
FAILURE
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
N1: CHECK CIRCUIT RMP07 (GN/WH) FOR OPEN
Disconnect Rear outer left parking aid sensor
C4MP15.
1
Disconnect Parking aid module C4MP01C.
2
Measure the resistance between the parking aid
module C4MP01C pin 8, circuit RMP07A (GN/WH),
harness side and the rear outer left parking aid
sensor C4MP15 pin 3, circuit RMP07B (GN/WH),
harness side.
3
Is the resistance less than 1 Ohm?
Yes
INSTALL a new rear outer left parking aid sensor.
REFER to:
Rear Parking Aid Sensor
(413-13 Parking
Aid, Removal and Installation).
TEST the system for normal operation. If the concern
persists, INSTALL a new parking aid module.
REFER to:
Parking Aid Module
(413-13 Parking Aid,
Removal and Installation).
TEST the system for normal operation.
No
REPAIR the circuit. TEST the system for normal
operation.
PINPOINT TEST O : DTC B1B5012 - REAR INNER LEFT PARKING AID
SENSOR SIGNAL - SHORT TO POWER
TEST CONDITIONS
DETAILS/RESULTS/ACTIONS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст