Ford Galaxy / Ford S-MAX. Manual — part 176
6.
WARNING: Only rotate the crankshaft
clockwise.
Turn the crankshaft until it stops against the
special tool.
7.
8.
NOTE: Only tighten the bolt finger tight at
this stage.
Bolt M6 x 18 mm
9.
CAUTION: Make sure that a new bolt is
installed.
Special Tool(s):
205-072
,
205-072-02
Torque:
100 Nm
90°
Stage 1:
Stage 2:
10.
11. Remove the special tool.
Special Tool(s):
303-376B
12. Remove the special tool.
Special Tool(s):
303-748
13.
WARNING: Only rotate the crankshaft
clockwise.
Turn the crankshaft one and three quarters of a
turn until no. 1 piston is at about 45° before
TDC.
14. Attach the special tool.
Special Tool(s):
303-748
15.
WARNING: Only rotate the crankshaft
clockwise.
Turn the crankshaft until it stops against the
special tool.
16.
NOTE: Only tighten the bolt finger tight at
this stage.
NOTE: The bolt can only be installed if the
valve timing is correct.
Bolt M6 x 18 mm
17.
NOTE: The special tool may only be installed
if the valve timings are correct.
Attach the special tool.
Special Tool(s):
303-376B
18. Remove the special tool.
Special Tool(s):
303-376B
19. Remove the special tool.
Special Tool(s):
303-748
20.
21. Torque: 20 Nm
22. Special Tool(s):
303-499
Torque:
12 Nm
23. Apply sealant (bead diameter 3mm).
Material:
Silicone Sealant LB (WSE-M4G323-A4 /
2U7J-M4G323-AA)
24.
NOTE: The gaskets are to be reused unless
damaged.
Torque:
10 Nm
25.
1. Torque: 10 Nm
2. Torque: 10 Nm
26. Torque: 10 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст