Ford Fusion Hybrid (2014 year). Manual — part 12

CREATING A MYKEY

Use the information display to create a
MyKey:

1. Insert the key you want to program into
the ignition. If your vehicle is equipped with
a push-button start, place the intelligent
access key fob into the backup slot. The
location of your backup slot is in another
chapter. See Starting and Stopping the
Engine (page 134).

2. Switch the ignition on.

3. Access the main menu on the
information display controls, and select
Settings then MyKey by pressing OK or
the > button.

4. Press OK or the > button to select
Create MyKey.

5. When prompted, hold the OK button
until you see a message informing you to
label this key as a MyKey. The key will be
restricted at the next start.

MyKey is successfully created. Make sure
you label it so you can distinguish it from
the admin keys.

You can also program configurable
settings for the key(s). See
Programming/Changing Configurable
Settings.

Programming/Changing
Configurable Settings

Use the information display to access your
configurable MyKey settings.

1.

Switch the ignition on using an admin
key or fob.

2. Access the main menu on the

information display controls, and select
Settings, then MyKey by pressing OK
or > button.

3. Use the arrow buttons to get to a

feature.

4. Press OK or > to make a selection.

Note: You can clear or change your MyKey
settings at any time during the same key
cycle as you created the MyKey. Once you
have switched the vehicle off, however, you
will need an admin key to change or clear
your MyKey settings.

CLEARING ALL MYKEYS

You can clear all MyKeys within the same
key cycle as you created the MyKey. If you
switch your ignition off, however, you will
need to use an admin key to clear your
MyKeys.

Note: When you clear your MyKeys, you
remove all restrictions and return all MyKeys
to their original admin key status at once.

To clear all MyKeys of all MyKey settings,
use the information display to do the
following:

1.

Access the main menu and select
Settings, then MyKey.

2. Scroll to Clear MyKey and press the

OK button.

3. Hold the OK button until ALL

MYKEYS CLEARED displays.

CHECKING MYKEY SYSTEM
STATUS

You can find information about your
programmed MyKeys by using the
information display.

MYKEY DISTANCE

Tracks the distance when drivers use a
MyKey. The only way to delete the
accumulated distance is by using an admin
key to clear your MyKey. If the distance
does not accumulate as expected, then
the intended user is not using the MyKey,
or an admin key user recently cleared and
then recreated a MyKey.

51

MyKey™

NUMBER OF MYKEY(S)

Indicates the number of MyKeys
programmed to your vehicle. Use this
feature to detect how many MyKeys you
have for your vehicle and determine when
a MyKey has been deleted.

NUMBER OF ADMIN KEY(S)

Indicates how many admin keys are
programmed to your vehicle. Use this
feature to determine how many
unrestricted keys you have for your vehicle,
and detect if an additional MyKey has been
programmed.

USING MYKEY WITH REMOTE
START SYSTEMS

MyKey is not compatible with non
Ford-approved, aftermarket remote start
systems. If you choose to install a remote
start system, see an authorized dealer for
a Ford-approved remote start system.

MYKEY TROUBLESHOOTING

Potential Causes

Condition

· The key or fob used to start the vehicle does
not have admin privileges.

I cannot create a MyKey.

· The key or fob used to start the vehicle is the
only admin key (there always has to be at least
one admin key).
· Vehicles with push-button start: The intelli-
gent access key fob is not positioned correctly
next to the steering column. See Keyless
Starting (page 134).
· SecuriLock passive anti-theft system is
disabled or in unlimited mode.
· The vehicle has been started using a remote
start system that is not programmed with
admin privileges. See Using MyKey With
Remote Start Systems (page 52).

· The key or fob used to start your vehicle does
not have admin privileges.

I cannot program the configurable
settings.

· No MyKeys are created. See Creating a
MyKey (page 51).
· The vehicle has been started using a remote
start system that is not programmed with
admin privileges. See Using MyKey With
Remote Start Systems (page 52).

· The key or fob used to start your vehicle does
not have admin privileges.

I cannot clear the MyKeys.

52

MyKey™

Potential Causes

Condition

· No MyKeys are created. See Creating a
MyKey (page 51).
· The vehicle has been started using a remote
start system that is not programmed with
admin privileges. See Using MyKey With
Remote Start Systems (page 52).

Purchase a new key from your authorized
dealer.

I lost the only admin key.

Program a spare key. See Passive Anti-Theft
System (page 61).

I lost a key

· The vehicle has a remote start system that is
recognized as an admin key. Clear all MyKeys
by using the remote start. See Using MyKey
With Remote Start Systems (page 52).

I accidentally programmed all keys as
MyKeys.

· The vehicle's system does not recognize any
programmed MyKeys. See Creating a MyKey
(page 51).

· An unknown key or fob has been created as
a MyKey.

MyKey total includes one additional key.

· The vehicle has a remote start system. See
Using MyKey With Remote Start Systems
(page 52).

· An unknown key or fob has been programmed
to the vehicle as an admin key.

Admin key total includes one additional
key.

· The vehicle has a remote start system. See
Using MyKey With Remote Start Systems
(page 52).

· The MyKey user is not using the MyKey.

MyKey distances do not accumulate.

· An admin key holder cleared the MyKeys and
created new MyKeys.
· The key system has been reset.

· An admin fob is present at vehicle start.

No MyKey functions with the Intelligent
Access key.

· No MyKeys are created. See Creating a
MyKey (page 51).

53

MyKey™

LOCKING AND UNLOCKING

You can use the power door lock control
or the remote control to lock and unlock
the vehicle.

Power Door Locks

The power door lock control is on the driver
and front passenger door panels.

E138628

Unlock

A

Lock

B

Door Lock Indicator

An LED on each door window trim will light
when you lock the door. It will remain lit for
up to 10 minutes after you switch off the
ignition.

Switch Inhibitor

When you electronically lock your vehicle,
the power door lock switch will no longer
operate after 20 seconds. You must unlock
your vehicle with the remote control or
keyless keypad, or switch the ignition on,
to restore function to these switches. You
can switch this feature on or off in the
information display. See General
Information (page 85).

Rear Door Unlocking and Opening

Pull the interior door release handle twice
to unlock and open the rear door. The first
pull unlocks the door and the second pull
will unlatch the door.

Remote Control

You can use the remote control at any
time. The luggage compartment release
button will only work when the vehicle
speed is less than 5 mph (8 km/h).

Unlocking the Doors (Two-Stage
Unlock)

E138629

Press the button to unlock the
driver door.

Press the button again within

three seconds to unlock all doors. The turn
signals will flash.

Press and hold both the lock and unlock
buttons on the remote control for three
seconds to change between driver door or
all doors unlock mode. The turn signals will
flash twice to indicate a change to the
unlocking mode. Driver door unlock mode
will only unlock the driver door when the
unlock button is pressed once. All door
unlock mode will unlock all doors with one
press of the unlock button. The unlocking
mode applies to the remote control,
keyless entry keypad and intelligent
access. You can also change the mode in
the information display. See General
Information (page 85).

Locking the Doors

E138623

Press the button to lock all the
doors. The turn signals will
illuminate.

Press the button again within three
seconds to confirm that all the doors are
closed. The doors will lock again, the horn
will sound and the turn signals will
illuminate if all the doors and the luggage
compartment are closed.

54

Locks