Ford Fusion Hybrid (2014 year). Manual — part 13

Mislock

If any door or the luggage compartment is
open, or if the hood is open on vehicles
with an anti-theft alarm or remote start,
the horn will sound twice and the lamps
will not flash. You can enable or disable
this feature in the information display. See
General Information (page 85).

Opening the Luggage Compartment

E138630

Press twice within three seconds
to open the luggage
compartment.

Make sure to close and latch the luggage
compartment before driving your vehicle.
An unlatched luggage compartment may
cause objects to fall out or block your view.

Activating Intelligent Access

(If

Equipped)

You must have the intelligent access key
within 3 feet (1 meter) of your vehicle.

At a Door

Pull an exterior door handle to unlock and
open the door. Make sure not to touch the
lock sensor on top of the handle.

E157085

Touch the top of the door handle to lock
your vehicle. There will be a brief delay
before you can unlock your vehicle again.

Note: Keep the door handle surface clean
to avoid issues with operation.

At the Luggage Compartment

E144402

Press the exterior release button hidden
above the license plate.

Smart Unlocks For Integrated
Keyhead Transmitter

This feature helps to prevent you from
locking yourself out of your vehicle if your
key is still in the ignition.

When you open one of the front doors and
lock the vehicle with the power door lock
control, all the doors will lock then unlock
and the horn will sound twice if your key is
still in the ignition.

You can still lock your vehicle with the key
in the ignition. To do this, use the keyless
entry keypad with the driver door closed,
or press the lock button on the transmitter
even if the doors are not closed.

If both front doors are closed, you can lock
your vehicle by any method, regardless of
whether the key is in the ignition or not.

Smart Unlocks For Intelligent
Access Keys

(If Equipped)

This feature helps to prevent you from
unintentionally locking your intelligent
access key inside your vehicle’s passenger
compartment or rear cargo area.

55

Locks

When you electronically lock your vehicle
(with any door open, vehicle in park and
ignition off), the vehicle will search for an
intelligent access key in the passenger
compartment after you close the last door.
If your vehicle finds a key, all of the doors
will immediately unlock and the horn will
sound twice, indicating that a key is inside.

You can override the smart unlock feature
and intentionally lock the intelligent access
key inside your vehicle. To do this, lock your
vehicle after you have closed all the doors
by:

•

using the keyless entry keypad

•

pressing the lock button on another
intelligent access key

•

touching the locking area on the handle
with another intelligent access key in
your hand.

When you open one of the front doors and
lock your vehicle using the power door lock
control, all doors will lock then unlock if:

•

the ignition is on, or

•

the ignition is off and your vehicle is not
in P.

Auto Relock

If you press the unlock button on the
remote control and do not open a door
within 45 seconds, your vehicle will lock
and the alarm will arm. You can enable or
disable this feature in the information
display. See General Information (page
85).

Autolock Feature

The autolock feature will lock all the doors
when:

•

all doors are closed,

•

the ignition is on,

•

you shift into any gear putting your
vehicle in motion, and

•

your vehicle attains a speed greater
than 12 mph (20 km/h).

The autolock feature repeats when:

•

you open then close any door while the
ignition is on and your vehicle speed is
9 mph (15 km/h) or lower, and

•

your vehicle then attains a speed
greater than 12 mph (20 km/h).

Autounlock Feature

The autounlock feature will unlock all the
doors when:

•

the ignition is on, all the doors are
closed, and your vehicle has been in
motion at a speed greater than 12 mph
(20 km/h);

•

your vehicle comes to a stop and you
switch the ignition off or to accessory;
and

•

you open the driver door within 10
minutes of the switching the ignition
off or to accessory.

Note: The doors will not autounlock if you
electronically lock your vehicle after you
switch the ignition off and before you open
the driver door.

Enabling or Disabling

Note: You can enable or disable the
autolock and autounlock features
independently of each other.

You can enable or disable these features
in the information display or your
authorized dealer can do it for you. See
General Information (page 85).

Illuminated Entry

The interior lamps and select exterior
lamps will illuminate when you unlock the
doors with the remote entry system.

56

Locks

The illuminated entry system will turn off
the lights if:

•

the ignition is on,

•

you press the remote control lock
button, or

•

after 25 seconds of illumination.

The lights will not turn off if:

•

you turn them on with the lamp control,
or

•

any door is open.

Illuminated Exit

The interior lamps and select exterior
lamps will illuminate when all doors are
closed, you switch the ignition off and you
remove the key from the ignition
(integrated keyhead transmitter only).

The lamps will turn off if all the doors
remain closed and:

•

25 seconds elapse

•

you insert the key in the ignition
(integrated keyhead transmitter only)

•

you press the START/STOP button
(intelligent access key only).

Battery Saver

If you leave the courtesy lamps, dome
lamps or headlamps on, the battery saver
will shut them off 10 minutes after you
switch the ignition off.

Accessory Mode Battery Saver for
Intelligent Access Keys (If Equipped)

If you leave your vehicle in the run ignition
state, it will shut off once it detects a
certain amount of battery drain or after 45
minutes.

Luggage Compartment

With the Remote Control

E138630

Press twice within three seconds
to unlatch the trunk.

From Outside Your Vehicle

E144402

Press the release button above the license
plate to unlatch the trunk. Your vehicle
must be unlocked or have an intelligent
access transmitter within 3 feet (1 meter)
of the trunk.

KEYLESS ENTRY

(IF EQUIPPED)

SECURICODE™ KEYLESS ENTRY
KEYPAD

The keypad is located near the driver
window. It is invisible until touched and
then it lights up so you can see and touch
the appropriate buttons.

Note: If you enter your entry code too fast
on the keypad, the unlock function may not
work. Re-enter your entry code more slowly.

57

Locks

E138637

You can use the keypad to:

•

lock or unlock the doors

•

release the trunk

•

recall memory seat and mirror
positions (if equipped)

•

program and erase user codes

•

arm and disarm the anti-theft alarm.

You can operate the keypad with the
factory-set 5-digit entry code. The code is
located on the owner’s wallet card in the
glove box and is available from an
authorized dealer. You can also create up
to five of your own 5-digit personal entry
codes.

Programming a Personal Entry Code

To create your own personal entry code:

1.

Enter the factory-set code.

2. Press 1·2 on the keypad within five

seconds.

3. Enter your personal 5-digit code. You

must enter each number within five
seconds of each other.

4. Press 1·2 on the keypad to save

personal code 1.

The doors will lock then unlock to confirm
that programming was successful.

To program additional personal entry
codes, repeat Steps 1-3, then for Step 4:

•

press 3·4 to save personal code 2

•

press 5·6 to save personal code 3

•

press 7·8 to save personal code 4

•

press 9·0 to save personal code 5.

You may also program a personal entry
code through the MyFord Touch system
(if equipped).

Tips:

•

Do not set a code that uses five of the
same number.

•

Do not use five numbers in sequential
order.

•

The factory-set code will work even if
you have set your own personal code.

Recalling Memory Positions (If
Equipped)

The programmed entry codes will recall
driver memory positions as follows:

•

Entry code 1 will recall driver 1 memory
positions.

•

Entry code 2 will recall driver 2 memory
positions.

•

Entry code 3 will recall driver 3 memory
positions.

Note: Personal entry codes 4 and 5 will not
recall memory positions.

Erasing a Personal Code

1.

Enter the factory-set 5-digit code.

2. Press and release 1·2 on the keypad

within five seconds.

3. Press and hold 1·2 for two seconds.

You must do this within five seconds
of completing Step 2.

All personal codes are now erased and only
the factory-set 5–digit code will work.

58

Locks