Ford F150 Pickup. Instruction — part 393

12. To install, reverse removal procedure. Position the accelerator pedal using the brake pedal motor, all the

way forward or backward, depending on the position of the new brake pedal. See Fig. 44 .

13. Remove the brake pedal-to-accelerator pedal cable from the accelerator pedal by pulling on the cable

retainer.

14. Position the brake pedal in the same position as the accelerator pedal, using the brake pedal motor.

15. Install the brake pedal-to-accelerator pedal cable in the accelerator pedal. See Fig. 39 .

16. To complete installation, reverse remaining removal procedures. Tighten fasteners to specification. See

TORQUE SPECIFICATIONS .

Fig. 38: Identifying Steering Column Support Bracket Nuts

and bracket and the bulkhead.

CAUTION: The brake pedal and the accelerator pedal must be in the same

position when installing a new cable or a new pedal. The pedals must
be in the all the way forward or all the way rearward position.

2003 Ford Pickup F150

2002-04 BRAKES Disc & Drum - Blackwood, F150 Heritage Pickup & F150 Pickup

Courtesy of FORD MOTOR CO.

Fig. 39: Identifying Cable Retainer
Courtesy of FORD MOTOR CO.

2003 Ford Pickup F150

2002-04 BRAKES Disc & Drum - Blackwood, F150 Heritage Pickup & F150 Pickup

Fig. 40: Identifying Brake Pedal Motor Harness Connector
Courtesy of FORD MOTOR CO.

2003 Ford Pickup F150

2002-04 BRAKES Disc & Drum - Blackwood, F150 Heritage Pickup & F150 Pickup

Fig. 41: Identifying Transmission Shift Cable
Courtesy of FORD MOTOR CO.

2003 Ford Pickup F150

2002-04 BRAKES Disc & Drum - Blackwood, F150 Heritage Pickup & F150 Pickup