Ford F150 Pickup. Instruction — part 1069
Fig. 184: Installing A/C Compressor Mounting Bracket
Courtesy of FORD MOTOR CO.
13. Connect the Cylinder Head Temperature (CHT) sensor and the knock sensor electrical
connectors.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 185: Connecting Cylinder Head Temperature Sensor & Knock Sensor Electrical
Connectors
Courtesy of FORD MOTOR CO.
14. Install the A/C compressor, if equipped. For additional information, refer to AIR
CONDITIONING (A/C) COMPRESSOR -- 4.2L .
15. Install the power steering fluid reservoir.
1. Position the power steering fluid reservoir.
2. Install the bolts.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 186: Installing Power Steering Fluid Reservoir
Courtesy of FORD MOTOR CO.
Both Cylinder Heads
16. Install the exhaust manifolds. For additional information, refer to EXHAUST
MANIFOLD LH and EXHAUST MANIFOLD RH .
17. Install the LH valve cover. For additional information refer to VALVE COVER LH .
18. Install the RH valve cover. For additional information, refer to VALVE COVER RH .
19. Install the lower intake manifold. For additional information, refer to LOWER INTAKE
MANIFOLD .
NOTE:
Inspect the LH valve cover gasket (6584) for damage. Install a
new gasket, if necessary.
NOTE:
Inspect the RH valve cover gasket for damage. Replace if
necessary.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
OIL LEVEL INDICATOR & TUBE
Removal & Installation
1. Remove the oil level indicator tube.
Remove the nut.
Remove the oil level indicator tube.
Remove and discard the oil level indicator tube O-ring seal.
Fig. 187: Removing/Installing Oil Level Indicator Tube
Courtesy of FORD MOTOR CO.
2. To install, reverse the removal procedure.
OIL PAN - 4X2
Material
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст